Jump to content

Seventynet

NRG Member
 View Profile  See their activity

  • Posts

    789

  • Joined

  • Last visited

 Content Type 

Everything posted by Seventynet

  1. Seventynet
    Thanks for the prodding and encouragement Zoran and Don and others for the likes. Much appreciated. I wasn't going to post until I had finished planking the hull but given my slow pace I'll post now to show I'm actually still making some progress. I can't quite put my finger on why it is taking so long with this build but I seem to only be able to get a single strake on per day. I have finished the top two 3 mm strakes and the subsequent four 5 mm strakes on both sides. I have spiled most of the stern planks and only a couple of the bow planks. The twist at the bow so far has mostly been manageable (and sandable) but I expect I will be spiling the rest of the way at the bow and the stern. Could I get away without spiling? Yes to this point but to achieve the more horizontal configuration that I am after I will have to spile the rest. So far I have needed stock widths of less than 30 mm but I expect this will increase slightly as I work my way to the keel. Here I thank Don for providing me with the wide walnut stock. Thanks Don! All of the planks completed so far will be covered by wales and facia, the rest of them to the keel will not be covered. Once I mark off the rest of the hull (3 or 4 strake bands) I will repost in case someone wants to follow me down this path. Best, Ian
  2. Seventynet
    Nice Marcus. I really like the gaff to mast attachment, whatever that's called. If I re-rig mine that's what I'll do. Unless I missed it I will be interested to see what you do for the gooseneck. You have done a beautiful job on this little boat. Thanks for sharing. I'd say your sister will be thrilled. Ian
  3. Seventynet
    Very clean and nice looking. Great work Paul. Ian
  4. Seventynet
    Nice work Don. A man of many skills! Ian
  5. Seventynet
    Very helpful illustrations Don. I will definitely be using your ideas! Ian
  6. Seventynet
    By age 60, eyes need three times more light to see as they did at age 20. So, depending on your age, lighting is important. I am constantly looking for ways to improve the lighting for what I'm working on. And by the way that is a fantastic workshop you have there. I look forward to many great builds coming out of it!
  7. Seventynet
    Great job as usual Don. You need to grab a brew, sit back and admire your handiwork. Ian
  8. Seventynet
    After the Brazzera, I think...I mean why hurry when I can live the Victory journey vicariously through your superb build? Best, Ian
  9. Seventynet
    Very nice Bob! Ian
  10. Seventynet
    Beautiful Heinz, simply stunning work. Thanks for sharing. Ian
  11. Seventynet
    Hey Les, I think Mike has hit the nail on the head - too many other kits are calling out to you! I shelved my Victory for a while mainly because I made a bad decision on what to line the gunports with, kind of like a last straw. So after a year of non-stop toiling on her I just moved on to several other kits, three of which I've finished and at least another on the road before I re-engage with the Vic. For me variety is the spice and tackling some models that can be finished in a month or three timeframes. Don't worry about moving to another kit I say. Best, Ian
  12. Seventynet
    Welcome and thanks for your support! Ian
  13. Seventynet
    Hi folks, Just a very quick update because even though it is minor, it's the kind of thing that would dawn on me after I planked if I hadn't paid attention to the manual (and Don's Trabacollo example). You have to mark off 1.8 mm (ish) from the top of each bulkhead top surface to delineate the top surface of the first of two 4 mm hull planks to be laid. This forms the bottom surface for the scuppers and will be flush with the deck surface. Best, Ian
  14. Seventynet
    And a belated Happy Birthday to you Don! Please continue with your splendid job on the Trabaccolo. Ian
  15. Seventynet
    Good to see you again Marcus. I will say that the materials in this kit are first rate, something I would not accuse our little catboat kit of possessing. But that's part of the fun of it. Your catboat is coming along beautifully. Ian
  16. Seventynet
    Thanks Bob, that puts a positive spin on the challenge. Ian
  17. Seventynet
    Frank thank you. Did you know that the Red Dragon line in your signature was not active? The only reason I mention it is that it is coloured blue as though it should be, or maybe you thought it was .
  18. Seventynet
    Thanks Bob, I'm going to be watching you carefully on the bow planking. I have the same sort of bluff bow. I just took a cruise through your endeavour build as you'll see from my likes. Best, Ian
  19. Seventynet
    Thanks for the likes and well wishes everyone. Its been a few weeks but not hard at it weeks. I've added and shaped filler blocks for the entire hull. I won't defend using blocks between the first three and last three bulkheads at the bow and stern, except to say they were pretty easy to do. Balsa and less complicated curves make life simple. But really, the bulkheads are fairly close together so one could easily get away without them I used basswood for the stern and bow bulkheads and that took more time. Anyway I am now ready to mark off the planks with the likely deluded notion that I can avoid drops and stealers. Stay tuned. Best, Ian
  20. Seventynet
    Nice work on the hatches, doors and steps. The cherry looks great. Best, Ian
  21. Seventynet
    Thank you kindly for the well wishes Don and Zoltan. Much appreciated.
  22. Seventynet
    Thanks Don, I will definitely be calling on you for the hull planking if you don't mind. I almost forgot I better throw some poly on the innards before I turn it over.
  23. Seventynet
    Thanks Michael. You are keeping me highly entertained with your many ongoing builds and your new restoration project. What a beauty that is! Ian
  24. Seventynet
    Thanks for looking in Zoltan. I'm just giving the Victory a break for a while. I'm loving your Sanata Maria. Please keep it coming. Best, Ian
  25. Seventynet
    I haven't looked in for a while Elijah, fantastic job! Ian

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...