Hi everybody. Sorry for the really long delay in posting. I haven't been doing much modeling for some time now. Still working in Colorado waiting for the house to sell in Kansas so my wife and dogs can join me here. We looked into places to rent or lease-to-purchase here, but having 3 dogs puts a big limit on what is available. It's been nearly half a year now but we're very hopeful that next month our house will sell there and we can then buy here.
But let's get back to the boat! With all of my tools in storage I decided to work on the sail. I figured all I would need is some thread and a needle. No sweat, a couple of dollars tops. Umm. The cloth that came with my whaleboat kit was way too coarse. At scale it was more like a net than sail cloth! So I found some nice cloth that is about 72 threads per inch and bought a spool of thread. Less than 5 bucks - no biggie. In Model Expo's "To Build A Whaleboat" book, they show a method of making a sail where you simulate seams by folding a zig-zag pattern in the fabric. This is done by making closely spaced parallel lines at the sail's 'seams' and folding the fabric along the first line and then positioning the edge of that fold on top of the second line and then pressing it flat. This creates an overlap that looks pretty convincing. The book says to make the parallel lines 1/4" apart which results in a 1/8" overlap, but since that is for the New Bedford Whaleboat kit that is nearly twice the size as my kit, I made the lines 1/8" apart for overlaps that are 1/16" wide. A little white glue was put into the overlap with a toothpick before the final pressing to help hold it together for a very flat look. I have a little steel bar that I used as an 'iron' to press the creases and overlaps nice and crisp (no heat used).
Lines marked out and starting the 1st crease
Pressing the 1st crease
Folding the 1st crease to the 2nd line and gluing the overlap shut
Finished seam creases
So with all the seams pressed, I was ready to start stitching the seams. The book shows 2 parallel rows of stitches; one along each edge of the overlap. I made an extra practice seam on the opposite end of my sail cloth to try to get the hang of using a needle and thread. My wife is kind of excited that we may actually sit together and stitch some day! This is pretty tiny work and it needs to look good on both sides of the sail. My Optivisor sure would be handy for this, but it's in storage somewhere. My boss at work has let me borrow his magnifying head band that he uses for changing batteries in his watch collection. They really do help and I'm thankful. Using the plastic lenses makes me appreciate even more the clarity of the optical glass lenses in the Optivisor. Can't recommend those enough!
So my sorry little practice sewing began and I quickly found out several things:
1) It's hard to make tiny stitches that look good on both sides.
2) Regular sewing thread is too big to look right at this scale.
3) Cheap household scissors do not cut thread very well.
4) Small thread that looks dark enough on a spool looks much lighter when used in small stitches.
5) You can spend a lot of money in a stitchery store, but they have some cool tools for this sort of work!
So here's part of my $40 haul at the stitchery store. The Inspira micro-tip embroidery scissors are a joy to use. The finger loops easily accommodate my Sasquatch fingers and they snip thread more cleanly than the cataract scissors from Model Expo. The Inspira scissors were only a little over $9 and you really need these! The special pencil allows you to mark fabric and the marks disappear after a few days. They can also be erased if you make a mistake. Regular pencil lead is hard to erase from fabric- I am going to have to do some careful washing once I finish stitching to get rid of some of my initial pencil markings. This marking pencil leaves a fat mark and I'm not sure how much I'll be using it. It's a bit pricey at about $20, but it comes with extra "lead" and a very cool twist to extend eraser. The folding stitch puller is handy for removing stitch mistakes, but is a tad large for the size stitches I'm making. I have mostly been using the tip of my needle to loosen and remove mistakes. It is a bit comforting to know that stitching mistakes are common enough that tools have been made to remove them!
So, here's some practice stitches. The stitches closest to the edge are done with regular sewing thread and they look very bulky to me. This polyester thread looked very thin on the spool, and I'm surprised how huge it looks on the sail. The next bit of stitches is still a bit bulky to my eye and the color disappears into to sail's color. I was surprised by that since the thread color has a nice contrast with the sail when its on the spool. This is Mettler brand No. 50 "silk finish" embroidery thread from the stitchery shop. The 3rd bit of stitches is using Mettler No. 60 "fine embroidery" thread and its size looks good to me. I'm thinking that the color is a tad too dark, but the next lighter color in brownish earthy tones that the store I got it from has is much lighter. In this thread size, most of the colors are very bright vibrant colors. I am going to look around a little more to see if I can find another color in that size of thread. This stitching is going to take a long time so I want to find a color I won't have 2nd thoughts about.
Three different thread sizes and colors.
Sorry for writing a book. Hope everyone is doing well.
Best wishes,
Hi Nils, I'm sorry it took so long for me to come across your build. Your craftsmanship and detail work is absolutely stunning!! What a beautiful ship! Very well done!! Best wishes,
