Jump to content

JpR62

Members
 View Profile  See their activity

  • Posts

    697

  • Joined

  • Last visited

 Content Type 

Everything posted by JpR62

  1. JpR62
    Outstanding work. Really a very high quality model. Many thanks for sharing your work !
  2. JpR62
    Bob, Thank you for your nice comments. The Medway longboat is really a high quality kit ! Yes, the Mikhail chisels are really fantastic and are very useful to me because I currently have neither a table saw nor a milling machine. For the diamond mini file I prefer them to the regular files. They must come if my memories are good from Modelexpo.
  3. JpR62
    Thank you for all the 'Likes' The bolsters are done. I used the magnificent Mikhail wood micro chisels. I'm lucky to have been able to acquire a set and it is a purchase that I do not regret. I also stuck sandpaper on wooden sticks of different diameters. I have allowed myself to not follow exactly the form provided by the plan and I have given to my bolsters a more personal touch. It took a long time and I had a good day to shape these two pieces. It's time to reduce the width of the caprail.
  4. JpR62
    So precise and clean ! 🙂 It seems so simple with your explanations and yet it requires a high level of execution quality. What a wonderful job ! Thank you for sharing your build with us !
  5. JpR62
    Thanks all for your kind words. I'm thinking about the hand painted side friezes variant... The caprail is now in place. It will be put in the right proportions after the installation of the two bolsters. Time to work on the challenging bolsters...
  6. JpR62
    Yes, when the Medway Longboat will be finished, I will start the 'Cheerful' cutter. I'm a big fan of the Syren Company kits ! The Frigate 'Winchelsea' also occupies my thoughts. 😉
  7. JpR62
    Superb work. I really like the smoothness of the caprail. She will become really beautiful. Take care of yourself and your family during this difficult time !
  8. JpR62
    The new building board is ready and the tops of the frames have been sanded down to the sheer. I can now install the caprail. 🙂
  9. JpR62
    Thank you all for your kind words and thank you to all the 'Likes'. The longboat was taken out of his baseboard. Just take your time. First I start by cutting with a small file. When the cut mark is formed, I continue with a saw. I remove the reinforcing tape with a tweezer just before finishing the cut. Time to prepare the installation of the caprail.
  10. JpR62
    After my stop due to my surgery, happy to go back to work on this longboat 😄 If for the side decorations, I will use the friezes supplied with the kit, for the transom decoration, I opted for a more personal version. I take advantage of the stability offered by the build board, to paint a small freehand motif. So I took out my tubes of extra fine oil paint. and it allows me to work again with my right hand 😉 Time to remove the baseboard.
  11. JpR62
    Thank You Michael, Chuck, Ryland and to all the 'Likes'. Ryland, it's really nice to be able to find your way to the workshop and especially to be able to reuse your right hand. Shaving with the left hand is not always very safe. 😅 I finished all the carvings. They are now in place and I am not unhappy to have opted to use them. I steel have to order the wood for the base. And it will be my first completed project 😁
  12. JpR62
    It's been a while ! Unfortunately, I was away from my workshop for 5 long weeks following a surgical operation on my right hand in February (see the photo taken the day after the surgery). I can now start doing some small jobs and it is also a good thing to regain the mobility of my hand. So I take this opportunity to finish the carvings for the Queen Barge. Work in progress...
  13. JpR62
    A wonderful book on many modelling techniques. Book published in German at VGB Verlagsgruppe Bahn GmbH under the title 'Marcel Ackle, Ein Natur-Talent', 2018. ISBN number of the German edition : 978-3-8375-1963-1 French edition (2019) proposed by LR PRESSE, www.lrpresse.com contact@lrpresse.com Author of text, photos and models : Marcel Ackle Book cover : Marcel Ackle ISBN number of the French edition : 978-2-37536-030-9 208 pages Format : 25 cm x 30 cm Contents : Some extracts Not directly a book on ship model making but a real 'gold mine' on painting techniques and many build tips. Unfortunately only in French or German but a lot of step by step photos. The address of Marcel Ackle's blog : http://www.feldbahn-modellbau.ch/ Thanks to Wefack for letting me discover the wonderful work of this talented model maker.
  14. JpR62
    I think Mike used two layers for the wales (see post #121 - page 5). It seems to me in 2 stages: first the upper 3 strakes then finally the last strake once the first strake below the wale was in (the strake which included the drop plank) - post #133 But Mike can confirm my answer.
  15. JpR62
    Superb work hyw ! I'm a great admirer of the Ancre books (as well as those of Gérard Delacroix). So I will follow with interest your build log. Thank You for sharing your work !
  16. JpR62
    Wonderful planking job ! Taking the time always pays ! A beauty !
  17. JpR62
    Thank You Chuck for your advice and Gary for your kind support. Thank You to all the 'Likes'. The planking is now finished. For the second layer, I used a more traditional method because I was afraid of not being able to give the exact shape that perfectly matches the first layer already in place using the heat of an hair dryer. As I was afraid that humidity would cause the first plank to curl, I protected it with masking paper using the laser sheet as template. The masking tape is then set up. The plank is soaked for 2 minutes in hot water and then placed on the hull. After a few hours, you get a plank that perfectly matches the shape of the hull and which can be glued without having to exert pressure. The masking paper prevented any deformation of the first layer already in place and facilitates the removal of the second plank once dry. The last board before its installation ☺️ The treenail simulation is finished and the second layer thinned at the bow and at the stern. A good stage completed 😅
  18. JpR62
    I took advantage of the end of the year to finish the planking of the hull. I still have to add the second layer for the two upper strakes. A question : Do I have to follow the same sequence for the installation of this second layer and start with the plank #15 ? Thank You in advance for your help.
  19. JpR62
    Chuck, Thank You for the quick answer. I will order it.
  20. JpR62
    Hello Chuck. On December 30, you indicated that Elmers wood filler had the exact same color as yellow cedar. I need it to finalize the hull of the Medway Longboat (some micro small gaps to fill between the keel and the planks at the bow...). As this product is not available in my country, I will buy it via Amazon. But I will be sure to buy the good product... It is found in several shades : natural, golden oak,... Can you give me the right reference (or put a picture of the box) ? Thank You in advance and all my admiration for the wonderful job on the Winchelsea ! 😍 Happy New Year !
  21. JpR62
    Thanks for sharing your wonderful job ! Happy Ney Year !
  22. JpR62
    Superb work, Ryland. Happy New Year 😊
  23. JpR62
    Very nice work. Russian master replace ebony with black hornbeam. This wood species seems easier to work. Take a look at the wonderful build log on a 'Friech Boeir Yacht' from Kortes https://modelshipworld.com/topic/19572-friech-boeir-yacht-sperwer-by-kortes-130-scale-finished/?tab=comments#comment-597413
  24. JpR62
    Excellent tool. Thanks for sharing !
  25. JpR62
    This ship is a little gem ! Thanks for sharing your wonderful work. Happy Christmas !

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...