Tarjack

well done Pawel......Gratulacje

Tank you all for the motivated words and also for the many many like´s

Much time has passed, but now i am back

Next step was to build the deadeyes and chainplates for the main-platform.

For the holes in the deadeyes I need a helpfull tool.

The tool it´s made from wood and brass.

The deadeyes are made on the lathe

After drilling the deadeyes the edges are chamfered  upward

Now it´s time to made the chainplates.

The plates have the dimensions of 1 mm x 0,5 mm x 12mm; above an eye and down a long hole 0.5 mm x 1 mm

The plates in position

The plates are fixed with glue on the deadeyes ready for stropping

The stropp for deadeyes is made with a real splice

The rope, made from three strands, will opend and for each strand i use a needle to made the splice.

All deadeyes are finish spliced on plates

Have fun

thank you all.

The next report coming soon

Hello Robert,

 

I didn´t expect to find swivel-guns on a royal yacht...

poor pirates of the carribian seas beautiful!!

....neither do I.

But they are shown on the plan ......

Swivels can be seen on the side walls.

The lantern on the mainmast platform

The shape of the lamp is hexagonal

The floor

Roof

Holder for the lamp

The windows of the lamp

The windows were made from Plexiglas and bone struts.
The struts are to be recorded on the Plexi and cut with a 0.3mm circumsawblade 0.5mm deep into the Plexiglas.
After that the struts may be glued into the joints

Cut and assemble the window frame

The roof cap made on lathe

Bracket for the lamp

Lamp in position

The struts of the lamp have been round and made by three parts

This is what the finished result looks

have fun

Thank you all for the nice comments

After some rough forging work let us turn about the finer things.

The Mainmast mars of Royal Caroline

The Saling and Floor

Floor

Floor mounted on Saling

Cover around the floor

The ribs

The railing and stanchions

Steps for the canons

Handle on the canons

Complete canons

Canons in position

the next step is the equipment of the Main-mars..

have fun

The anchor of the Royal Caroline



Agent "P" has discovered a large blacksmith on one of its many rides and accurate documented as there made the anchors.

First Step: The material

But here we go, this time without much bla bla ..... let the pictures speaks

I hope you have enjoyed the photos, the next round deals with the large Mars.

Have fun

Thank you all for the good wishes,

HAPPY NEW YEAR

Thank you Dimitris,

yes i feel fine now......

Hello friends,

I'm back on deck.
After a heart attack in Dec. 14  (1 Month Hospital) and pneumonia (15 Weeks), i look forward to  fulfill my hobby again.

The next report from building the Caroline is in progress....

Hi Doris,

 fantastic work, as always

Hello friends,

new photos of the construction progress the BHR.

Karl  

Hallo Karl,

einfach nur phantastisch

just beautiful

Hello friends,

I am unfortunately somewhat extremely busy at present.
But the next report is nearly finished

Bye for now

Hi Mike,

I do the glue on a small disk and from there I take the glue with a narrow blade

Thank you Nils

Hi Michael,

Yes, it is.
The work with bones is a nice addition and opens the
model horizon to do other things

Ingenius.  I would not have thought of doing that way.  Why go to the trouble of making your own goue when CA works great on bone?

David B

because CA glue  is the biggest sh......peep

CA shall be taken only to attach small pieces befor glue with real glue

CA did not work great on bone CA crystallises out and the component is destroyed.

Continuation of  #197

The blanks now filed

Now the self-made holding tool is used http://modelshipworld.com/index.php?/topic/5248-holding-tool-for-holding-small-parts/

The result looks like this

and so in wood

have fun

Tell me ....... have I already shown, how I've made the blocks ? ..................

Not ?

well then

At this point should be said....... exactly the same method applies to wooden blocks

First, as always choose the material

The length of the blocks and the length of disk apertures are marked on the raw material and cut out on the table saw. The bar is sawn on both sides for two-disc Blocks, so it is guaranteed that both discs openings are parallel

Now the parts are joined together. So that nothing can slip secured with guide pins

Next step is to make the axle holes. The holes are the same diameter as the discs

Bring the pieces together with bone glue.

Now mounting the rotated axes / turn washers ..... if you will, that the discs are portable, leaves  the glue away at this point

will be continued

Hello Karl,

oh boy.................. and you call me artist.

I wish, when i grow up, i can make a masterpice like this

Hello Doris,

I think my crew is on the wrong ship. What do you think?
I should keelhaul those guys

very very good as allways. I wish i can do this too

Af-fen-geil!

Now try to translate that!

 

Peter

mon-key...peeeeeeeep; terrific

he dude booyakascha

i also rebuild some pieces of the capstan

the replaced parts
barrel; whelps; capstan bar;

Now enjoy the pic`s

Now are the pawl`s, rope and whelp-chocks still missing

about this I will report next time

have fun

Not happy is not the proper expression.

I pressed me long years before the remodeling