Jump to content

druxey

NRG Member
 View Profile  See their activity

  • Posts

    12,930

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    Grant's method works very well for avoiding that concave look!
  2. druxey
    That Pegasus figure was beautifully modelled, Doris. With a fully-round figure, would you make it in two halves, or model it completely in the round?
  3. druxey
    Good save, Ed. It's been my experience that problems of this nature always occur at the cant frames, not the square ones - of course!
  4. druxey
    I like your frame 'hold-down' device. Are the larger cross-pieces above and below the frame fixed or are they movable?
  5. druxey
    Coming along nicely, Mario. Looks like the real thing now!
  6. druxey
    Your mention of Munchausen's ducks made me smile. Nice examples of serving you have there as well.
  7. druxey
    It's better not to harden line (rope) if you are then going to spin it up into cable.
  8. druxey
    Nice to see the replay of your progress!
  9. druxey
    I assume that the extensions are there only for long pieces of stock, Gaetan? Nice microphotographs, too. Is there anything that you are not expert at?
  10. druxey
    Those really are lovely looking blocks, Remco.
  11. druxey
    The 'right answer' would take up several chapters of a book! Probably the best short answer is to look a Ed T's build log of Naiad. You will see how complex this is. The only short answer is to the question of plank length. Standard lengths in the 18th century British yards were either 24' 0", 26' 0" or 28' 0". The butts were staggered or offset from the outside planking for maximum strength.
  12. druxey
    A proper 'hook' on the scraper's edge is critical to using this tool. I also file off the corners of my scrapers so that 'dig in' is avoided. Check the url that Richard has kindly provided.
  13. druxey
    Properly laid line, hardened, should not unravel when cut. The opposing torque in the strands/threads/rope should cancel each other out and provide a 'balanced' line.
  14. druxey
    The crossjack is indeed a yard, but one not set with a sail.
  15. druxey
    This is one you will need to chalk up to experience, I'm afraid. The upside of this will be that the re-do will be better than the original work - it always is! I had to remove some port lids today that were sub-standard. Revision happens to all of us!
  16. druxey
    Now that inclined plane for planing is a neat idea! Thanks for sharing the idea. That Nielsen plane looks like a nice bit of kit, too. The scores on your whelps look great. Nice work - as usual, Mark.
  17. druxey
    I absolutely agree, Patrick!
  18. druxey
    And don't forget, these old-time model makers had no power saws, mills or other machine tools to produce these masterpieces!
  19. druxey
    Seeing your work again is a nice reminder of how high a standard you work to, Ed. You almost make that tricky stern framing look easy!
  20. druxey
    Looks like you are good and ready for action next weekend!
  21. druxey
    Gutermann cotton thread is a good possibility to consider, as quality linen thread becomes harder to find.
  22. druxey
    Beeswax has been identified as being slightly acidic, which is not good for the lines in the long run. Conservators' wax, which is pH neutral, might be a better choice.
  23. druxey
    Ron: to keep your chisels in top-notch shape, get the Lee Valley Stone Pond and sharpening guide with a couple of water stones.
  24. druxey
    Good to see you back again, Sailcat. Thanks for re-posting your meticulous re-working of this model.
  25. druxey
    Good to see you and your fine work back on this forum!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...