Jump to content
Dfell

HMS Fly by Dfell - FINISHED - Amati / Victory Models - Scale 1:64

Recommended Posts

Thank you very much for the lovely comments - Blue Ensign / Landlubber Mike / SpyGlass / Tigersteve / probablynot and to all those that pressed the 'like' button. Thank you.

 

Yes it is a shame the metal castings are not good.

 

The blue is the French navy blue with quite a bit of white, some black, and bit of red.

 

The white waterline was sprayed with acrylic matt paint. First with a couple of coats of grey primer, sanded then couple of coats of the white. Then clear matt lacquer.

So as to not to get any bleed under the masking tape - having stuck the tape down - I paint on along the edge of the tape (that the new  paint goes up to) the colour that is under the masking tape thus sealing it. In this case it was clear matt lacquer.

 

probablynot  - maybe Pegasus might be a better build as the fitting may be better and you will have master builders (Blue Ensign / Landlubber Mike - among others :) ) to follow.

Talking of great builders - what has happened to Aliluke (Alistair)?

 

Regards

 

Doug

Edited by Dfell

Share this post


Link to post
Share on other sites

Nicely done, Doug, nicely done indeed.  I would have been afraid to use spray paint, but your strategy of laying a coat under the tape sound ingenious.  Spy's right about those fittings, and they don't get any better.

 

We all miss Alistair's contributions to the Fly/Pegasus community.  But as a working man myself, I know how hard it can be sometimes to get to the boatyard for any extended work.

 

Cheers,

 

Martin

Share this post


Link to post
Share on other sites

Stern windows fitted plus window ledge. The decorations above in arched section left off as they did not quite fit in - besides it was nice to see some of the red colour.

 

post-673-0-53835800-1480610437.jpg

 

post-673-0-73003200-1480610451.jpg

 

Still a bit of touching up needed as glue is showing.

The side decorations were snapped in two places so as to get them to fit the curve of the hull and I can see in the picture that I haven't hidden the join so well. :)

 

 

Thanks Gahm for looking in and the nice comments. Just wished I could take really close up pictures without showing some wobbly work unlike your incredible work which really is a pleasure to see.

 

Also thank you Martin W. 

Couple of other great builders - vths and pnevrin - seem to have disappeared?

 

Regards

 

Doug

 

Share this post


Link to post
Share on other sites

Hello - have been assembling the cannons this last month. 

The 6 lbs cannons and carriages I have used are from the Syren company and the picture below shows the kit supplied metal carriage and cannon, the upgrade kit carriage with original cannon, and the Syren carriage and cannon. Felt I could have done with something slightly larger than I had.

 

post-673-0-73266700-1485608476.jpg

 

post-673-0-30437100-1485608502_thumb.jpg

 

 

Syren 6 lbs carriage and cannon partly rigged, using 2mm block supplied with upgrade kit, black tape used for the brackets holding cannon to carriage and 0.4 rivets (from model train shop) on the top of the carriage.

 

post-673-0-80076000-1485608520.jpg 

 

post-673-0-02889400-1485608536.jpg

 

 

Thank you for the previous comments and the likes.

 

Regards

 

Doug

Edited by Dfell

Share this post


Link to post
Share on other sites

I agree with BE - the Syren guns look much better.  Amati does such a nice job with the kit, it's a shame that they use out of scale guns.  I replaced my cannons with ones from RB models which are pretty close to the Syren ones in size and shape.

Share this post


Link to post
Share on other sites

Hello and thank you Blue Ensign and mcpesq817 for the comments concerning the cannons. It is good there are other suppliers for these things otherwise we would have to make do with the kit supplied bits.

 

The 8 cannons below the upper decking rigged - using the upgrade kit 2 mm blocks and rope.

 

_DSC0001.thumb.JPG.a05357e15e4f50d7ac8108f9cba65452.JPG

 

_DSC0002.thumb.JPG.a0d1d16b516558696629e1c419258aa5.JPG

 

One barbecue / camping stove / or even vaguely a 'Brodie' stove. Copied from Martin W / Aliluke /and Lloyd Matthew   http://hmsfly.com/brodieGalleyStove.html#sectionTwo 

The galley stove was made from a block of balsa wood then covered with thin plywood.

 

_DSC0005.thumb.JPG.b46d4ce7cb32c33f3697bcbbbcb98f8e.JPG

 

_DSC0006.thumb.JPG.ba3f21bc4877dd6884368745f3694f00.JPG

 

Cross beams, Partition, capstan etc fitted in place.

_DSC0008.thumb.JPG.3020e2bf5fcd1068e1465868591affbb.JPG

_DSC0010.thumb.JPG.e24f29be7e254a2124bcdd8721438b61.JPG

 

_DSC0011.thumb.JPG.14f3b7d14d37e018b4f5369d367d98a4.JPG

 

Sorry a lot of photos.....

 

Regards

 

Doug

 

 

 

 

Share this post


Link to post
Share on other sites

Thank you Martin. And the stove looks a bit too long as I think Blue Ensign had spotted that and I am embarrassed to admit. It does sort of sit under the chimney position but does really need to be moved over a few mm but would cause a problem with the mast bits :huh:.

This is presuming I have the stove going in the right direction. Have followed Martin W and Aliluke on this but have noticed Aliluke changed his around. If it should be the other way round then the length is good but height not so good due to the overhead beam. 

 

Now need to see what should be done next - been concentrating hard on cannons and rigging and stove and have lost sight of the next stages.....

 

Anyway thanks for the looking and comments.

 

Doug

Share this post


Link to post
Share on other sites

Doug, my Stove is positioned wth the chimey forward, it is the only way it would fit.

I pondered over this for some time but came across a reference to stoves sometimes facing that way.

I did notch out the beam to allow for the steam grating to sit without the beam blocking it from beneath.

I did quite a lot of modifications beneath the Foc'sle deck  one of which was to provide sockets on the underside of the deck to take the legs of the Foc'sle bitts. This meant that the legs didn't extend down to the upper deck and would not therefore block your stove whichever way you positioned it.

Possible solutions😊

 

B.E.

Share this post


Link to post
Share on other sites

Thank you B.E for the help in this matter concerning the stove. It has been a bit embarrassing not to have really checked everything through while building the stove. Have decided to turn the stove around, adjust the beam and this way it gives more room around the stove so it looks like it could be used.

Again thank you for taking the time to explain. Unfortunately was unable to find your stove to see what you had done on your build I guess due to sad problems with the sites upgrade.. 

 

Regards

 

Doug

Share this post


Link to post
Share on other sites

Aha - found it and have found out something else. As I have very bad internet here when I have been flicking through your log no pictures  so did not see any stove. Today left the page (link supplied) open for half an hour and wow - pictures started to appear. Technology eh?

Now I can get back to study rest of your build - and be patience knowing the pictures will be there.

Must add that it seems only on your log and the early part I have this problem. Just thought the mishap with the site upgrade had lost your pictures.

 

Thank you

 

Doug

Share this post


Link to post
Share on other sites

Hi Doug -- I worried over the direction of the stove for quite a while.  Finally, I got the bright Idea of looking at the NMM plans and placed it accordingly.  As I was making the stove, I did find that it was going to be longer than the space allowed, so I had to modify it.  In the end, it's tight no matter what.

 

cheers,

 

Martin

Share this post


Link to post
Share on other sites

Hello - Been busy doing the Bow part. Quite challenging to say the least!! 

Upper decks planked - the quarter deck just placed and not glued down.

 

_DSC0008.JPG.96f83d9385aa2f3208f10dc21c4ec4a9.JPG

 

_DSC0012.thumb.JPG.107b91dd34c780114f72a973a157ef8a.JPG

 

 

 

Cheeks painted blue so where ever the decoration appears it has always on a blue background. The instructions ask for black.

The 'side pieces' have a strip of 1 x 1 walnut strip added painted yellow. (An addition)

 

_DSC0005.JPG.c2e5a51c40bebf8893605a46f511790f.JPG

 

_DSC0007.thumb.JPG.176264713c47384dd05324cf728ba500.JPG

 

Next - will do guns on the lower deck and then back to the quarter deck.

 

Thanks for looking 

 

Regards

 

Doug

 

 

Share this post


Link to post
Share on other sites

Thank you very much Mirabell61 and Tigersteve for your comments and to those who pressed the 'like' button.

 

Mirabell61 - not seen many white painted hulls either but if I do another build may do copper. Have found on both my builds the white hull had cracks after a few months appearing along the planking. Maybe why most choise either copper or left wood. So before it gets impossible to turn the ship over (mast and rigging started) I repair the hull - gluing / filling / paint etc. On my first build ( HM Brig Supply) the cracks have not reappeared - fingers crossed.  

 

Thanks

 

Doug

Share this post


Link to post
Share on other sites

Thank you Tallshiptragic for looking in and your much appreciated comments. I thought this ship had a lot of decorations but seeing your amazing build I realize you cannot have enough ....... I have struggled with the the brass decor on this build and having tried unsuccessfully to put the trim carefully on the cheeks without glue showing have given up.

 

Blue Ensign - again thanks for looking in. The book idea was brilliant - absolutely lovely.

 

Have now rigged the guns - just the coils to do. The pumps and handles are also done.

 

_DSC0003.JPG.c5cdce6850caa1a4c4b8a13df0af10dc.JPG

 

_DSC0004.thumb.JPG.8fb0fd8aa917faecccb8a63ba4d2b07f.JPG

 

The side screens. A bit clumsy.

Got frustrated with the brass trim on the cheeks so took them off.

Also for some reason there was a gap on the side where there was no trim yet the plans showed the last section of brass trim went right up to the catheads. As I had some spare from not doing the bow section have placed some bits in. Probably will find later on down the line this will be a mistake.

 

_DSC0007.JPG.62405c7b3628f67dc7d7c09ea5b91e9b.JPG

 

 

Have now completed other bits of trim on the sides

 

_DSC0008.JPG.eb0a4fd6dc4bcae87fbf92607483965d.JPG 

 

Regards

 

Doug

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...