G.L. Posted May 26, 2017 #181 Posted May 26, 2017 Sounds very familiar. G.L. Canute and mtaylor 2 G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
the learner Posted January 19, 2018 Author #182 Posted January 19, 2018 (edited) I am still here but other things have gotten more priority than my hobby, but I plan on getting back to it soon. in the meantime I have been enjoying other post! Thanks G. L. Edited January 19, 2018 by the learner robdurant, Pete38 and mtaylor 3 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
AnobiumPunctatum Posted January 26, 2018 #183 Posted January 26, 2018 This are really good news. the learner 1 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
rdsaplala Posted February 3, 2018 #184 Posted February 3, 2018 Hello Guy, Just catching up, nice to see you've completed framing the hull, she's shaping up nicely, Sir, I'm looking forward to your resumption of your build. mtaylor and the learner 2 Best regards,AldoCurrently Building: HMS Pegasus (Victory Models)-Mothballed to give priority to Triton HMS Triton (first attempt at scratchbuilding) Past build:HM Brig Badger (Caldercraft), HM Brig Cruizer, HM Schooner Ballahoo
the learner Posted February 8, 2018 Author #185 Posted February 8, 2018 Thanks Lawrence! If I ever get back to it!!! if you followed the builds that were provided I think you will see that most of us did not use the rap around building board but as you can see from about page 4 on I do have a building board just not one that wraps around the upper part of the frames. This is my first build of this type and as you can see I have a long way to go on it. It seems that every one in the shipyard has gone on vacation, LOL mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted February 8, 2018 Author #186 Posted February 8, 2018 On 2/3/2018 at 3:25 AM, rdsaplala said: Hello Guy, Just catching up, nice to see you've completed framing the hull, she's shaping up nicely, Sir, I'm looking forward to your resumption of your build. ME TOO! LOL mtaylor and rdsaplala 2 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted April 1, 2018 Author #187 Posted April 1, 2018 Guy is still here! and my Triton is still siting on my work bench! have done very little work on it but have not taken it off the todo list yet. Life sort of takes over when you least expect, I actually retired in January but started a project in the house which my wife and I have been planning for several year, "remodeling the kitchen" actually turning every thing up side down! I still work on models when I have an occasion, I now have 5 in the dry-docks. I promise you I will get back to my Triton build before the end of the year! mtaylor and Mike Y 2 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted April 2, 2018 Author #188 Posted April 2, 2018 On 2/5/2018 at 4:34 PM, canoe21 said: Hello Guy I have just found your build log on the HMS Triton. Great job you are doing on your ship and I can see very much improvement in your building skills even from post to post. I have often thought that I would like to build one of these frame builds just like you are doing but have been afraid to get my feet wet so to speak, you are doing such a great job on yours that who knows I may make that big jump. One question though is there a reason that you have decided against a building board as all of the other builds of this type have always been with a building board? Keep up the great work and I will continue to follow and maybe build up enough courage to build one of these frame ships in my Old Ship Yard, ENJOY. Regards Lawrence This is not my first POF but the first time using this method, Hann method before. Great job on the African Queen. mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted September 11, 2018 Author #189 Posted September 11, 2018 On 2/26/2014 at 11:51 PM, harvey1847 said: !!! I doubt it Guy. With that ribband method and the squares to set the fore cant frames you are saving lots of time... I "spent" lot of time building the stern and stem jigs. On next projects I will go your way, a base board and lots of square sets. what is the other building you are working on?! Best wishes Guy! daniel. Daniel! I hate to admit it but I have 8 models in drydock in various stages, some are mine from scratch and some were started by some one else (3) and I have taken over their builds. mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted February 24, 2019 Author #190 Posted February 24, 2019 Still here and still planning on finishing up framing for this build. Glad to see we have had a few more join mtaylor and GrandpaPhil 2 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted September 25, 2019 Author #191 Posted September 25, 2019 Hate to keep saying this but I am still here and have about rapped up my other projects ( not ship building) and am looking forward to getting back to my hobbies! AnobiumPunctatum and mtaylor 2 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
AnobiumPunctatum Posted September 26, 2019 #192 Posted September 26, 2019 This are good news. I like to watch your progress. I hope that I can start et the end of the year with my version of tis beautiful little frigate. mtaylor 1 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
the learner Posted October 16, 2019 Author #193 Posted October 16, 2019 Still hanging! Build is still on my work bench, along with several others. I always thought that when you retired you had a lot more free time ...... well not true. Its really less time.. for one you move slower and more people want your time! Edwardkenway, AnobiumPunctatum and mtaylor 3 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
EdT Posted October 17, 2019 #194 Posted October 17, 2019 Stick with it, Guy. Ed mtaylor 1 All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory
the learner Posted December 14, 2019 Author #195 Posted December 14, 2019 (edited) Thanks Ed! Following your builds have been wonderful learning experience and look forward to you next project. Question are you going to post a build log for the PS HOPE? And why did you decide to use this ship for your new book as there is already a lot of material published describing her. Edited December 14, 2019 by the learner Correct spelling mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
samson Posted April 5, 2020 #196 Posted April 5, 2020 (edited) Nice freams - it looks to bee a real beuty . Edited April 5, 2020 by samson mtaylor 1
the learner Posted May 10, 2020 Author #197 Posted May 10, 2020 Ok time for me to get back to this build. I need to straighten out some of the frames and rework the gun ports that have opened up or were located in the incorrect plane, not square, irregular or insufficient size of the cross beam. I will start with building up the insides. I have decided I will do no masting or rigging so I will have to show as much of the interior construction as possible and keep the exteriour as open as possible. Bon voyage! Edwardkenway, AnobiumPunctatum, jchbeiner and 2 others 5 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted January 23, 2022 Author #198 Posted January 23, 2022 Well life sure gets in the way! I definitely got side tracked for quite sometime and now find myself recuperating from lower left leg amputation, it like it will be a long time before I ever get back to the triton build. Sorry guys, perhaps I can change my name from the learner to "peg leg" Regards. The learner ccoyle 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
bruce d Posted January 23, 2022 #199 Posted January 23, 2022 Guy, I'm really sorry to hear that news. Triton will still be there when you are ready, it is a great thread and will finish one day with a great model. Perhaps you want to pull up a chair and steer me toward the light with my Mediator build which I am resurrecting? Bruce mtaylor 1 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold
the learner Posted January 23, 2022 Author #200 Posted January 23, 2022 Bruce, thanks for the encouragement, I am trying hard, doing all the required Pt exercises and then some. I don't have to stand to build, just have access. Yes I would love to follow along with your Mediator. Can you send me the link? I am using my phone to access the site! It will be awhile before I get to my computers. Regards, Guy The Learner mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
mtaylor Posted January 25, 2022 #201 Posted January 25, 2022 I'm sorry to hear of the health problems, Guy. I believe you'll get back to where you were with your attitude. My ex- is an amputee and ran a support group for awhile. If their experience is any measure, you seem to be on your way with the therapy. If you can find one nearby, a support group will help as there's a wide variety of experience and knowledge to tap into. bruce d 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
druxey Posted January 25, 2022 #202 Posted January 25, 2022 Every best wish as you go through rehab. Hopefully you'll be back on track soon. mtaylor 1 Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
the learner Posted February 2, 2022 Author #203 Posted February 2, 2022 Thank you Druxey, much appreciated from the master. I look forward to that day mtaylor and druxey 2 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted February 2, 2022 Author #204 Posted February 2, 2022 Thanks mayor, thanks for the encouragement and I know exactly which model I will tackle first. The one at the very right for which you can see the stern and the sail barley a gunboats with a peryauger (sp) bow spirit pointing upwardly. mtaylor, bruce d, G.L. and 1 other 4 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
the learner Posted February 14, 2022 Author #205 Posted February 14, 2022 Back home from the hospital 🏥 but will take me awhile before I get back out in garage to work on models but it's one of my top priorities along with other chores that I left hanging before they removed my lower left leg 🦵 cheers to everyone bruce d, ccoyle and mtaylor 3 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
mtaylor Posted February 18, 2022 #206 Posted February 18, 2022 Guy, I hope recovery continues to go well and you can back to doing the things you want. Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts