scrubbyj427 Posted December 5, 2019 Author Share #31 Posted December 5, 2019 I started adding the laser cut lower framing today it’s going ok but I ran into some big adjustments on #3, I had to take off around .0625” on each piece to get the ends of the bulkheads to match the measurement at the BF and bulkhead intersection. Did anyone else experience having to trim these parts up at all? I feel like these parts should be gimmies... My new table saw should be here tomorrow and I can start making some more frame pieces. JJ paulsutcliffe, GrandpaPhil, Saburo and 6 others 9 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 11, 2019 Author Share #32 Posted December 11, 2019 Finished all the port framing today, just need to add the vertical frames tomorrow and fair it up. Hopefully I can get the stern frames mocked up this weekend. That Byrnes saw changed my life! I also corrected and error I found on frame 28, I noticed that it shifted over to the stbd side so everything was high on the port side, thankfully it was easy to correct by softening the glue and clamping it in its proper location until dry again. rafine, Saburo, Captain Poison and 13 others 16 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted December 11, 2019 Share #33 Posted December 11, 2019 That looks very good. You are well on your way. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 16, 2019 Author Share #34 Posted December 16, 2019 Last night and today I worked on the stern frames, that was a little tricky, I stared at it a lot and constantly was making adjustments in fear of getting something a little off. I think it turned out ok though. Lots more sanding tomorrow and hopefully onto the quarter galley framing. Im not quite certain of the lower sills on the transom, I installed them perpendicular to the frame where they sit, should they be more towards horizontal? Matt D, Jorge Diaz O, Wacom and 14 others 17 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted December 16, 2019 Share #35 Posted December 16, 2019 Looks very good FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
jimvanlan99 Posted December 16, 2019 Share #36 Posted December 16, 2019 Wow, she is looking really good. Great job. scrubbyj427 and FrankWouts 2 Link to comment Share on other sites More sharing options...
Rustyj Posted December 16, 2019 Share #37 Posted December 16, 2019 I think it looks spot on. Well done. FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 16, 2019 Author Share #38 Posted December 16, 2019 Thanks guys, I’m enjoying this build. Loving 1:48 scale. FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Blue Pilot Posted December 16, 2019 Share #39 Posted December 16, 2019 Beautiful work FrankWouts 1 Mark Current Builds: 18th Century Merchantman 1/2 Hull Smuggler Pride of Baltimore II Gallery: Yankee Hero Armed Virginia Sloop Future Builds: Rattlesnake, Fair American Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 18, 2019 Author Share #40 Posted December 18, 2019 (edited) A lot of sanding dust and sawing wood today. Stern framing is on, hoping to complete chapter 1 before I go on vacation. Chuck, I fear I may have taken too much material off the outer stern Frames. Will this work or should I glue some thin strips back on and fair it again? Edited December 18, 2019 by scrubbyj427 FrankWouts, rafine, AnobiumPunctatum and 5 others 8 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted December 18, 2019 Share #41 Posted December 18, 2019 The only way to tell for sure is to cit out the stern template and check it against your stern. FrankWouts, Saburo, Stuntflyer and 2 others 5 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 18, 2019 Author Share #42 Posted December 18, 2019 I’ll print it out tomorrow and double check. I may be doing a little filling. FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 10, 2020 Author Share #43 Posted January 10, 2020 Alright back on the wagon! Just finishing up chapter 1. Started fairing the inner bulwarks today, almost got one side done. Once this is finished I’ll build the bollards, finish fairing the inners and finish up chapter 1. Happy new year! Edwardkenway, rafine, Captain Poison and 14 others 17 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
JeffT Posted January 10, 2020 Share #44 Posted January 10, 2020 Looks very good. FrankWouts 1 Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard Link to comment Share on other sites More sharing options...
Chuck Posted January 10, 2020 Share #45 Posted January 10, 2020 Looking good!!! 😀 almost ready for planking. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 17, 2020 Author Share #46 Posted January 17, 2020 Got the bollard timbers in place, I think they need a little touching up but I’m happy with how it went for the most part. A few details to go and I will have chapter one completed. JJ JpR62, CaptMorgan, Matt D and 12 others 15 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted January 17, 2020 Share #47 Posted January 17, 2020 Very nice. They look really good and i know how tricky they are to make. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 17, 2020 Author Share #48 Posted January 17, 2020 Thanks Chuck, I’m happy with how it’s coming along, really enjoying this build. FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 27, 2020 Author Share #49 Posted January 27, 2020 I got the stern planking in today, it turned out pretty decent, ive sanded it and it’s ready for WOP, speaking of which, what’s the popular choice for WOP? Also has anyone had this much planking hang over the frames? Is this indicative of taking too much material off? JJ Saburo, GrandpaPhil, FrankWouts and 6 others 9 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted January 28, 2020 Share #50 Posted January 28, 2020 That looks fine. They are left extra long just in case. Just sand it flush on both sides. use satin and never gloss wipe on poly. Also dont forget to add those filler strips below the counter. You forgot Ryland Craze, Kurt Bainum, FrankWouts and 2 others 5 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 28, 2020 Author Share #51 Posted January 28, 2020 Got it! Thanks for pointing that out Chuck. FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
jimvanlan99 Posted January 28, 2020 Share #52 Posted January 28, 2020 Scrubbyj427, Looking really good. I am several days/weeks behind you but working on it. I really appreciate the opportunity to watch you progress (and learn). Jim FrankWouts and scrubbyj427 2 Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 28, 2020 Author Share #53 Posted January 28, 2020 Thank you Jim, much appreciated. I’ve been stalling for bit but plan to get some planks on this week. JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 29, 2020 Author Share #54 Posted January 29, 2020 Finally got some lumber nailed to the side of this thing. Good thing this is going to have another layer over the top, there’s going to be just a little filling at the bow. How are you guys ripping your planks? Are you setting the rip fence once and just pushing the block through or are you moving the fence each time? I need to perfect ripping yesterday! JJ Edwardkenway, FrankWouts, Saburo and 6 others 9 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted January 29, 2020 Share #55 Posted January 29, 2020 That looking great. I usually set the fence once 3/64 from the blade and go to work. I use feather boards to keep the sheet down and against the fence. FrankWouts and Saburo 2 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 29, 2020 Author Share #56 Posted January 29, 2020 Thanks Chuck. What exactly do you mean by feather board? Just something to hold the plank that’s being cut, down? It seems as you get close to the end of the cut the large board wants to dive into the blade and then it screws up the next cut. By the way, what blade are you all cutting with? Thanks, JJ Saburo, Chuck and FrankWouts 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Rustyj Posted January 29, 2020 Share #57 Posted January 29, 2020 This is a typical feather board set up. There are many variations. Trussben, JpR62, Captain Poison and 4 others 7 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 29, 2020 Author Share #58 Posted January 29, 2020 Thanks Rusty, I have a feeling that’s going to be a massive help. That actually looks like a commercially available product? thanks, JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted January 31, 2020 Author Share #59 Posted January 31, 2020 Before I get too carried away on a planking binge, I’m slightly concerned with the landing of the planks at the stern. Chuck, you or anyone else’s thoughts? I’m happy with the rest of the run so far. I’m concerned I may have to do the transom again? Thanks, JJ Blue Pilot, FrankWouts, GrandpaPhil and 2 others 5 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Trussben Posted January 31, 2020 Share #60 Posted January 31, 2020 JJ From what I see from that stern view, it appears that you have tapered them too much inwards, look again at the plans from astern to see the correct shape and adjust from there. ben Heronguy, Saburo, FrankWouts and 2 others 5 Current builds: HMS Pegasus TFFM. HMS Winchelsea. Completed builds: ECHO cross section.18th C Longboat.QA Barge. Medway Longboat. Link to comment Share on other sites More sharing options...
Recommended Posts