Egilman Posted April 8, 2020 #1 Posted April 8, 2020 Ok this will be OOB, and with only what I have on hand for supplies. I built one of these 30+ years ago and the wife took one look at it and claimed it... It sat on her shelf in the living room for 10+ years with a halogen spotlight shining on it.... And she was proud as punch when she was telling people that I built it for her...... Unfortunately, it didn't survive the trip to the new digs 20 years ago, and since I'm at a place I can't finish the truck till parts get here, I'm going to occupy my time re-creating something she loved..... I'm starting with the Monogram # 2311 The Metal Master kit.... And yes, that is exactly the way Monogram thought we should build it... Soft Chrome & Gold.... The instruction have no painting suggestions or table of colors... I am on my own... {chuckle} You know it doesn't look all that bad in reality, it's not real of course and saudi sheiks weren't buying cars with sterling silver bodies and solid gold trim yet..... This was the 1930's, the middle of the great depression Ford Model "A"'s were selling for just over $250.00 Henry Ford was paying his workers unheard of money so not only would they stay but be able to buy his cars... this Packard was selling for $5,200.00 decidedly a car for the well heeled... But one must understand what one was buying when they bought one of these, THIS, is the original muscle car.... Two generations before Carrol Shelby started the ponycar/musclecar rage, this was the car to get if you wanted to go fast in style...... It has an up-tuned Packard Straight Eight that boasted a whopping 109hp, it was sold as a car that would do 109 mph when everyone else was barely getting to 80.... (road tests easily demonstrated that it would peg the speedo at 120 and eventually break the cable) Yep, 120 mph stock....... some 120 Packard speedsters were built, in five different body styles, of course the most popular was the runabout, but they had a phaeton, a coupe, a sedan and a touring car as well, all built on the speedster chassis. (some 50 or so were runabouts of which 30-35 still exist, the sedan is the rarest of them all, 15 were built and only two known vehicles remain) They can sell for up to 2 million dollars for a particularly well documented showroom car, or 50-60,000 for a decdntly maintained driver. Anyway... as with all vehicle kits, they start you out with the engine...... First lets take a look at the real deal..... Packard Green and a nice polished aluminum crankcase trimmed in black..... And my feeble effort to replicate it.... Frame coming up next....... EG yvesvidal, Moab, BLACK VIKING and 16 others 19 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Jack12477 Posted April 8, 2020 #2 Posted April 8, 2020 (edited) 45 minutes ago, Egilman said: it was sold as a car that would do 109 mph when everyone else was barely getting to 80.... (road tests easily demonstrated that it would peg the speedo at 120 and eventually break the cable) I think the Auburn and the Cord were guaranteed from factory to also top 100 MPH. The Auburn Boattail Speedster was powered by a 4.6L straight eight that, with the popular supercharger option (150 hp), could top 100 mph (160 km/h). And The Cord 810, and later Cord 812, produced by the Cord Automobile division of the Auburn Automobile Company in 1936 and 1937 was the first American-designed and built front wheel drive car with independent front suspension. My Dad's mechanic, whom Dad insured, bought a Cord (don't remember which model or model year), restored it and drove it around for years. When he bought it the idler gear was cracked, so he had to make a new one from scratch. This is going to be a fun kit to watch. BTW that is a beautifully restored model in those photos. Edited April 8, 2020 by Jack12477 Egilman, mtaylor, Edwardkenway and 5 others 8 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Egilman Posted April 8, 2020 Author #3 Posted April 8, 2020 Yeah Cord bought Auburn to try and rescue the brand, he then set about revamping the lineup by creating the Auburn 8 in '24 and built a few cars to fit it.... He knew about the Packard speedster and tried to compete by creating the Auburn Speedster (the boattail was a direct response to the Packard) then redesigned the eight to produce the speed and power. But it was the depression, and not a lot of car companies made it thru... Auburn didn't....... It's a darn shame I believe the Auburn speedsters were also very fine automobiles.... There are a bunch of pics of Packards online some of them absolutely beautiful and the resto work is above excellent.... This was a fun kit to build back then, didn't take too long and I did a few tricks with it.... going to replicate them here.... the kit falls together amazingly well and good detail..... they still show up on evilbay as there is usually a couple of them for sale... they did a whole series of the metal master kits mostly of the antique cars. they didn't sell well cause back then most didn't know how to deal with the chrome very well... the whole metal masters thing was viewed as a gimmick so they didn't go over well with the modelers.... I have the V-16 Caddie metal master in my stash also. mtaylor, popeye the sailor, Old Collingwood and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Edwardkenway Posted April 8, 2020 #4 Posted April 8, 2020 Yep I'm in EG, gonna be a good looking car whatever colour you choose 😁👍 Canute, Old Collingwood, mtaylor and 2 others 5 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
Kurt Johnson Posted April 8, 2020 #5 Posted April 8, 2020 I always liked the boat tails. Here’s an Auburn I saw this past summer in the town next to mine. Cars had a lot of class then. I’m going to enjoy this build. Kurt Jack12477, BLACK VIKING, GrandpaPhil and 13 others 16 Quote Member: Ship Model Society of New Jersey
Canute Posted April 8, 2020 #6 Posted April 8, 2020 I'm in, too. Looks like a car show day there, with the custom job across the street. Where was that, Rutherford? Edwardkenway, popeye the sailor, Old Collingwood and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Kurt Johnson Posted April 8, 2020 #7 Posted April 8, 2020 Ken, Are you a transplant? It’s Somerville, Somerset Co. They have a car night every Friday from May till about August. Not sure what this year will bring. Usually a lot of classic hot rods and a ton of Vettes. It’s really nice, free, there are lots of sidewalk resturants, but crowds of people so this year is anybodies guess. If you look across the street you can see some of the Hot Rods. Kurt EricWilliamMarshall, Old Collingwood, Edwardkenway and 2 others 5 Quote Member: Ship Model Society of New Jersey
Canute Posted April 8, 2020 #8 Posted April 8, 2020 Kurt, I am. I've been in Somerville a time or two, when I worked NJ emergency management, out of Piscataway. Used to be a good BBQ joint with a blues club attached, I vaguely remember. Grew up in Bergen County. We do a similar Friday night drill here from April to mid September.. And dancing to a variety of live bands. We're pretty touristy around here, so the precautions are really crimping the whole scene on our Main Street. Old Collingwood, Edwardkenway, mtaylor and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
popeye the sailor Posted April 9, 2020 #9 Posted April 9, 2020 sweet looking engine.......yup.......definitely have to go back a few years to find truly sculpted cars. it was a sad day when we went into our 'square days' Old Collingwood, mtaylor, EricWilliamMarshall and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Kurt Johnson Posted April 9, 2020 #10 Posted April 9, 2020 I always thought the stream lined locomotives like the New York Centals Hudsons where really cool looking too. Kurt Canute, popeye the sailor, Old Collingwood and 2 others 5 Quote Member: Ship Model Society of New Jersey
Old Collingwood Posted April 9, 2020 #11 Posted April 9, 2020 Gonna be a great kit. OC. mtaylor, popeye the sailor, Egilman and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Egilman Posted April 10, 2020 Author #12 Posted April 10, 2020 Well Thank you everyone for pulling up a seat, comments advice and explorations of history are always welcome.... Sit back and enjoy the journey...... EG popeye the sailor, Old Collingwood, mtaylor and 1 other 4 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #13 Posted April 10, 2020 WE have an engine, now we need wheels for the engine to do its job..... Wheels and Tires..... I normally don't partake of wide whitewalls, but in this case, on gold rims, they really look the part..... But the point is to put the engine power to the wheels and for that we need a frame....... For this edition, I stripped the chrome off the frame and running gear, the previous one I didn't and had to deal with constant touch ups cause paint doesn't stick to chrome that well. Paint adhesion here won't be a problem. Now this car had a frame that the engine crankcase was an integral part of the structure on the forward end. here I've inserted the engine between the frame rails to align the two sides so the rear cross members are assured of being square. It was removed for painting..... Overall semi-gloss black....... Assembled.... Next part, the lower body pan & fenders....... (dressing out the underworks) EG...... EricWilliamMarshall, Jack12477, Ryland Craze and 16 others 19 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
popeye the sailor Posted April 10, 2020 #14 Posted April 10, 2020 chassis looks really nice Canute, Old Collingwood, mtaylor and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
yvesvidal Posted April 10, 2020 #15 Posted April 10, 2020 EG, How do you remove chrome from the sprues/parts? Do you use some chemicals or do you sand it away? Yves Egilman, popeye the sailor, Old Collingwood and 3 others 6 Quote
Egilman Posted April 10, 2020 Author #16 Posted April 10, 2020 51 minutes ago, yvesvidal said: How do you remove chrome from the sprues/parts? Do you use some chemicals or do you sand it away? I use a product called Super Clean, takes the most stubborn chrome off in three hours, overnight, it take off the electroplating lacquer also... Then rinse in water..... yvesvidal, Canute, Old Collingwood and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #17 Posted April 10, 2020 A demonstration of chrome stripping..... The next part is the Floorpan/Fenders/Underside. the part that connects the body to the frame and adds the distinctive fenders to the chassis.... OOB, it is completely chromed both sides..... Top... (sitting in position on the chassis) Bottom.... (showing the underneath floor details) The top has to be shiny gloss black, the bottom of course has to be flat black..... Super Clean..... (I get mine from Wally World in the automotive section) For some reason the camera turned the bottle blue it's actually very medium dark purple...... I pour some out in a tray..... And at 9:30 am I place the part in the super clean.... It's not deep enough to completely cover it cause I want to show how easy it really is..... so the high spots will remain chrome while the rest will be clean dark green plastic... As it works, I will take photos without disturbing it util it's done.... EG Jack12477, lmagna, Ryland Craze and 8 others 11 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #18 Posted April 10, 2020 Short time update.... Ten minutes.... You can already see it working on the recesses and running boards........ 20 minutes...... Running boards and recesses are almost clean, beginning to clean the wide flat surfaces..... 40 minutes..... Foam is forming around the wide flat floor as it attacks the chrome, at 1 hour, I will give it a swirl in the cleaner and take a look at the underside..... It works amazingly fast....... way better than bleach or oven cleaner without any elbow grease needed or the smelly odors from oven cleaner..... It's my go to for stripping chrome..... And it's bio-degradable so it is safe....... Great stuff... Fright, yvesvidal, Canute and 8 others 11 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #19 Posted April 10, 2020 One hour in the Super Clean.... I gave it a bit of a swirl and tilted it so you can see the effect....... All except for the hard edges, (which take a lot of plating during the plating process, it is clean) and in another half hour the hard edges will be clean as well.... The undersides, 1 hour in.... Almost completely clear....... Another half an hour or so to get the hard edges and then flip her over to do the parts that were out of the solution.... This is the chrome stripper everyone should be using.... and besides, diluted 5/1, it makes some the best household cleaner around..... Put this in your tool kit you will not be sorry.... GrandpaPhil, Canute, EricWilliamMarshall and 8 others 11 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #20 Posted April 10, 2020 At 1 hr 40 min, she was done on that side.... So we flip her over.... And 40 minutes later.... Almost done.... we will be right in at three hours for a complete strip and that was doing it in two stages, If I had completely inundated it in Super Clean, it would be done already.... I have no affiliation with Super Clean or any of it's parent or subsidiary companies and no financial stake at all in this product... My interest is solely in that it works for modeling better than anything else I have ever seen.... and I would recommend it to any one needing to strip electroplated chrome off of plastic without damaging the plastic underneath.... Now when this is done in a few minutes I wash it off, dry it and now, in three hours, it's ready for paint.... EG Ryland Craze, hexnut, druxey and 9 others 12 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Shotlocker Posted April 10, 2020 #21 Posted April 10, 2020 Greetings, I'm wondering if that Super Clean will remove old paint from plastic as well, any experience with that? I've used brake fluid in the past but that stuff is iffy and nasty to work with. Old Collingwood, EricWilliamMarshall, Canute and 1 other 4 Quote
Egilman Posted April 10, 2020 Author #22 Posted April 10, 2020 10 minutes ago, Shotlocker said: Greetings, I'm wondering if that Super Clean will remove old paint from plastic as well, any experience with that? Greetings to you as well!!! thanks for looking in... No I haven't tried it on paint, but I do know that left to soak overnight / 24hrs, it separates/removes the dielectric lacquer they use to get the chrome to stick to the plastic in the first place.... All I can say is give it a try, it isn't going to hurt it...... And yes, stripping paint in brake fluid is a nasty process..... Thank you for asking... EG lmagna, Canute, EricWilliamMarshall and 1 other 4 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Shotlocker Posted April 10, 2020 #23 Posted April 10, 2020 Thanks for the response! I guess I'll add the Super Clean to our shopping list for when we dare to venture out again and give it a try. Seems like if it will remove lacquer it should remove enamel as well. I'll certainly let you know the results. I have an old Monogram '59 Cadillac kit that needs a horrible paint job removed. Great work you're doing on that Speedster, by the way. Old Collingwood, Canute, mtaylor and 2 others 5 Quote
Fright Posted April 10, 2020 #24 Posted April 10, 2020 She's a sweety! Wonderful job on the engine. So much that catches the eye on older cars. Your certainly off to a great start! mtaylor, Old Collingwood, Edwardkenway and 3 others 6 Quote Robert O
Egilman Posted April 10, 2020 Author #25 Posted April 10, 2020 28 minutes ago, Shotlocker said: Thanks for the response! I guess I'll add the Super Clean to our shopping list for when we dare to venture out again and give it a try. Seems like if it will remove lacquer it should remove enamel as well. I'll certainly let you know the results. I have an old Monogram '59 Cadillac kit that needs a horrible paint job removed. Great work you're doing on that Speedster, by the way. My pleasure, and stay tuned there's more coming.... Thank you for the compliment...... 27 minutes ago, Fright said: She's a sweety! Wonderful job on the engine. So much that catches the eye on older cars. Your certainly off to a great start! Back then they really had a sense of style, not so much nowadays.... Thank you... EG lmagna, Canute, mtaylor and 1 other 4 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Canute Posted April 10, 2020 #26 Posted April 10, 2020 EG, very nice tutorial. May give it a shot for paint stripping Egilman, Edwardkenway, Old Collingwood and 2 others 5 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Egilman Posted April 10, 2020 Author #27 Posted April 10, 2020 (edited) Thanks Ken, I wish it was a tutorial more a demonstration... pour in it something, and drop the parts in.... For most parts I use a pint mason jar with a lid, every so often I just give it a shake stir it up a bit, I use another pint jar with lid full of clear cold water for the rinse, same thing leave it soak for a bit giving it an occasional shake.... when done lay them out on a paper towel to dry them.... The super clean in the jar last for several kits before needing changing, the water bath I change after every stripping job..... The floor pan/fenders on the packard is the largest part I've ever had to strip chrome off of.... seems to work fine there also.... Hopefully it does work on paint..... EG Edited April 10, 2020 by Egilman Edwardkenway, mtaylor, Canute and 1 other 4 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted April 10, 2020 Author #28 Posted April 10, 2020 It's now 4 hrs later, and one completely clean part..... No chrome anywhere and ready to paint..... Nothing advocates better than the end result.... Thank you for your patience..... (and indulging me by following along) realworkingsailor, lmagna, Moab and 10 others 13 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Edwardkenway Posted April 11, 2020 #29 Posted April 11, 2020 That's fantastic stuff EG, I wonder if it's available over here? Motors looking fine 😁👍 Canute, Egilman, Old Collingwood and 2 others 5 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
Egilman Posted April 11, 2020 Author #30 Posted April 11, 2020 58 minutes ago, Edwardkenway said: That's fantastic stuff EG, I wonder if it's available over here? Motors looking fine 😁👍 Amazon.co.uk lists it but says it is unavailable due to high demand..... (right) I don't think it can be shipped...... Thank you for the compliment.... Edwardkenway, mtaylor and Canute 3 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.