Jump to content

Finally bit the bullet


Recommended Posts

Hi everybody, another newbie here. We've all reacted in different ways to this pandemic. For myself, I've been having the urge to make something, to keep both my hands and my mind occupied, to have a large on-going project as a break from teaching and writing a book. Not entirely sure why I got so determined that it had to be a model ship, but here we are. I made plastic model cars and planes as a kid and, back then, I always thought it would be cool to make a ship. So I guess maybe this is an unfulfilled childhood fantasy. 

 

After much research on this forum and other sites, I finally bit the bullet last night. Ordered the Artesania Latina Bon Retour kit, along with some tools I didn't already have and some glue, stains, and varnish. Why the Bon Retour? Well...this site has some great advice for newbies to the hobby and I got intimidated enough by the kits I really want to make that I (wisely) chose to start with something simpler and more affordable. (Seriously, thanks to all of you who have posted guidance and recommendations for newbies, as well as those of you who've posted detailed build logs.) I'm a historian, so look forward to eventually building some of the ships that hold particular historical interest for me. I'm also a francophile, so am looking forward to doing some smaller French ships while figuring out how to do planking and rigging.

 

Now, the long wait until the kit arrives and I can get started...

Link to comment
Share on other sites

Welcome to MSW. When you are ready to start the build be sure to start a build log in the build logs for ship model kits forum. Have fun!

Jeff

 

In progress:
Medway Longboat 1742 - Syren Ship Model Company -1/2" scale

USS Constitution - Model Shipways - Scale 1:76

HMS Granado - CAF Model - 1:48

HMS Sphinx - Vanguard

Link to comment
Share on other sites

:piratebo5:welcome to MSW, good luck with your build and have fun! Oh and be sure to start a build log!

Edited by Edwardkenway

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Link to comment
Share on other sites

Thanks for the welcome, all! I had been torn between the Saint-Malo and Bon Retour kits. What made the difference was seeing Philthy's build log and, especially, Invictaag's build log on BrexitModeller. Invictaag's log is very detailed and filled with tips that I think will be helpful (even though it was quite intimidating on my first read-through!). I'll be sure to do a log here, since I have no doubt I'll need the feedback and tips from those of you with more experience.

 

Got the shipping notification from Ages of Sail this morning, so the kit is on its way!

Link to comment
Share on other sites

Welcome to MSW, HakeZou.   Just remember, it's not a race but a hobby so enjoy the process.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

42 minutes ago, HakeZou said:

Thanks for the welcome, all! I had been torn between the Saint-Malo and Bon Retour kits.

Welcome aboard, HakeZou. You made a good choice to build the Bon Retour. It's a lovely looking boat. My very first wood model was the AL Saint-Malo dory and it was not a very good kit in my opinion although it did get me hooked on model ship building. The materials and the instructions left a lot to be desired. I did enjoy making the hull and thwarts and painting them but I stopped without finishing the mast and sails since they just looked too historically incorrect. There are better dory boat models available than the Saint-Malo. I look forward to seeing your build log of the Bon Retour. Good luck!

Bob Garcia

"Measure once, cuss twice!"

 

Current Builds: 

Hms Brig-Sloop Flirt 1782 - Vanguard Models

Pen Duick - Artesania Latina 1:28

 

Completed: Medway Longboat 1742 - Syren Ship Model Co. 

Member of the Nautical Research Guild

 

 

 

Link to comment
Share on other sites

:722972270:

Mark
Phoenix, AZ


Current builds;


Previous builds, in rough order of execution;
Shipjack, Peterbrough Canoe, Flying Fish, Half Moon, Britannia racing sloop, Whale boat, Bluenose, Picket boat, Viking longboat, Atlantic, Fair American, Mary Taylor, half hull Enterprise, Hacchoro, HMS Fly, Khufu Solar Boat.

On the shelf; Royal Barge, Jefferson Davis.

Link to comment
Share on other sites

Welcome!

Building: 1:64 HMS Revenge (Victory Models plans)

1:64 Cat Esther (17th Century Dutch Merchant Ships)

 

Favorite finished builds:  1:60 Sampang Good Fortune (Amati plans), 1:200 Orel Ironclad Solferino, 1:72 Schooner Hannah (Hahn plans), 1:72 Privateer Prince de Neufchatel (Chapelle plans), Model Shipways Sultana, Heller La Reale, Encore USS Olympia

 

Goal: Become better than I was yesterday

 

"The hardest part is deciding to try." - me

Link to comment
Share on other sites

:sign:

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

I think model ship building is going to suit me. Sat down this afternoon to start sanding the false keel...and then suddenly it was dinner time. Tonight the wife went to bed early, so I thought I'd sand some more of the frame...and now it's 3 hours later. Really enjoying the meditation of things so far.

 

The woodwork also brought back some deep-seated memories that I had forgotten about. Every summer evening when I was a kid, our neighborhood gathered in Eldy and Glendol's driveway. We'd all bring lawn chairs and just hang out chatting until after the sun set. Eldy was a really special guy who loved kids, so we all bonded with him. Even though he was about 60 years older than me, I thought of him as a friend when I was in elementary school. He had retired from our town's steel mill after an accident claimed two of his fingers. But in his retirement, he took up woodworking with a passion. He made model stagecoaches (from kits) and Conestoga wagons (from scratch). He also made rocking horses (and rocking elephants!) and a variety of knick-knacks for decorating the house. By the time I was 9 or 10, he'd taught me how to sketch designs on the planks, to cut them out with a band saw, to sand, and to use paint and stain. My first project was one of his classic designs: a Dutch sabot with three tulips growing out of it (all in profile, nothing too complicated). This ship is bring me full circle in a way I hadn't expected!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...