Zero Posted November 26, 2020 #1 Posted November 26, 2020 Hello all. Just registered few days ago. The project was actually stratered 7months ago. I chose Graf Zeppelin because it was my second most played ship in World of warship.(with highest exp record lol ) The ship is still building but I am sorting out different photos and would like to share with you. Please don't be hesitate if anything that I could improve. yvesvidal, popeye the sailor, Canute and 4 others 7
Zero Posted November 26, 2020 Author #2 Posted November 26, 2020 The portholes were good enough. However, I did not want to waste the PE set so I drilled them and put on the PE. I also created the wielding lines by disolved putty. Old Collingwood, Lt. Biggles, mtaylor and 7 others 10
RGL Posted November 26, 2020 #3 Posted November 26, 2020 Fantastic, great to see another. Old Collingwood, popeye the sailor, Canute and 2 others 5 Greg
Zero Posted November 26, 2020 Author #4 Posted November 26, 2020 There are strang holes on the ground of the working station inside the GZ....Can't understand why the Trumpter made these. The ceiling is modified by the grid sticker. Old Collingwood, yvesvidal, Canute and 3 others 6
Zero Posted November 26, 2020 Author #5 Posted November 26, 2020 One of the most difficult part during the build: saw an area of the flight deck to install to catapult. But I failed and need to use putty to recreate the shape..... Landrotten Highlander, Old Collingwood, Canute and 4 others 7
RGL Posted November 26, 2020 #6 Posted November 26, 2020 The catapault replacement is a killer, took me a few days. I suggest you get some super thin plastic card perhaps? mtaylor, popeye the sailor, lmagna and 2 others 5 Greg
Zero Posted November 27, 2020 Author #7 Posted November 27, 2020 9 hours ago, RGL said: The catapault replacement is a killer, took me a few days. I suggest you get some super thin plastic card perhaps? Hi RGL. Your work inspired me lot！ I tried the plastic card but the deck was badly damaged. At last, I needed to reshape the whole things again and again. Anyway, Thank you for your suggestion！ And here is the some work on the forehead. Canute, mtaylor and popeye the sailor 3
Zero Posted November 27, 2020 Author #8 Posted November 27, 2020 The PE was so hard to bend. Therefore, I needed to burn it with a lighter so the PE became more flexible to work with. The gap between the PE was filled with putty. Landrotten Highlander, S.A.A., popeye the sailor and 1 other 4
RGL Posted November 27, 2020 #9 Posted November 27, 2020 The more I think of it, once you get the woods deck down it won’t matter, there is a plate that sits at the front anyways. popeye the sailor, Zero, lmagna and 2 others 5 Greg
Zero Posted November 27, 2020 Author #10 Posted November 27, 2020 Ship's Camo Landlubber Mike, popeye the sailor, Old Collingwood and 1 other 4
Zero Posted November 27, 2020 Author #11 Posted November 27, 2020 7 hours ago, RGL said: The more I think of it, once you get the woods deck down it won’t matter, there is a plate that sits at the front anyways. It seems that I have sanded too much and the alignment of the two catapults are imbalanced...One is higher and one is lower💀 popeye the sailor and mtaylor 2
Zero Posted November 28, 2020 Author #12 Posted November 28, 2020 Handpainted anchor winch base on the wows color Landlubber Mike, yvesvidal, Landrotten Highlander and 5 others 8
Lt. Biggles Posted November 28, 2020 #13 Posted November 28, 2020 Looking good mate, seems like she is a big ship! mtaylor, popeye the sailor, Zero and 3 others 5 1
Jonald Posted November 28, 2020 #14 Posted November 28, 2020 This build is shaping nicely. May I ask how did you make the weld lines? Zero, mtaylor, Old Collingwood and 1 other 3 1
Zero Posted November 28, 2020 Author #15 Posted November 28, 2020 1 hour ago, Jonald said: This build is shaping nicely. May I ask how did you make the weld lines? Sure:) After masking like the pictures below, you may spray the mr.hobby surfacer for few times(3 to 5 times). If you wanna get a rougher lines, you can use the 400/600 ones. I used the 1000 in this model. popeye the sailor, yvesvidal, Landlubber Mike and 3 others 6
Zero Posted November 29, 2020 Author #16 Posted November 29, 2020 Adding details for the bridge. (Wires, ducts and vents) Sonce I am making non-combat status scenario, the doors had to be drilled and keep it opened. yvesvidal, Jonald, popeye the sailor and 5 others 8
Zero Posted November 30, 2020 Author #17 Posted November 30, 2020 AA platforms support structure 😉 Landrotten Highlander, mtaylor, Old Collingwood and 4 others 7
Zero Posted December 1, 2020 Author #18 Posted December 1, 2020 Here are the 10.5 cm SK C/33 guns. The above one is Trumpeter with MK.1 PE and the other one is Veteran. The details of trumpeter is okay but you might choose Veteran for more details. Old Collingwood, popeye the sailor, mtaylor and 5 others 8
Zero Posted December 3, 2020 Author #19 Posted December 3, 2020 First time trying on the preshade of the planes. It take me hours but the outcome seems not bad. The MK.1 PE set does not include the canopy while the Infini does not provide details PE and weapons.... lmagna, mtaylor, Lt. Biggles and 11 others 14
Ian B Posted December 3, 2020 #20 Posted December 3, 2020 wow -- love those planes-- great paint work and detail popeye the sailor, Canute, Old Collingwood and 3 others 5 1 HMAV Bounty 'Billings' completed ⛵ HMS Cheerful - Syren-Chuck' completed Steam Pinnace 199 'Billings bashed' - completed ⚓ HMS Ledbury F30 --White Ensign -completed 😎 HMS Vanguard 'Victory models'-- completed Bismarck Amati 1/200 --underway 👍
RGL Posted December 3, 2020 #21 Posted December 3, 2020 Your planes are fantastic, so much better than I can achieve popeye the sailor, Old Collingwood, Canute and 3 others 5 1 Greg
ccoyle Posted December 3, 2020 #22 Posted December 3, 2020 2 hours ago, Ian B said: wow Yep, that was my first thought too when I saw those. That's some serious fine control skills with an airbrush on display right there! popeye the sailor, Zero, Canute and 4 others 6 1 Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Fokker D.VI
popeye the sailor Posted December 3, 2020 #23 Posted December 3, 2020 quite a ship.......the PE for these models are awesome.......so much added detail! the planes are superb......some really high detail there as well Old Collingwood, Zero, lmagna and 2 others 4 1 I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
lmagna Posted December 4, 2020 #24 Posted December 4, 2020 It is hard to believe that those planes are 1/350th, not 1/48th or bigger! Can't wait to see what you do to the overall model! popeye the sailor, Old Collingwood, mtaylor and 2 others 4 1 Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey
Old Collingwood Posted December 4, 2020 #25 Posted December 4, 2020 Same as everyone has said - Truly Amazing work. OC. Zero, lmagna, popeye the sailor and 2 others 4 1 Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Zero Posted December 6, 2020 Author #26 Posted December 6, 2020 Really appreciate all of the supports! That really cheers me a lot. Billion Thanks! I have checked the 3D Kagero and found that the railings(?Not sure how it should be called) is thinner than what the MK.1 design provided. And here comes the holes drilling challenge again mtaylor, Canute, Jonald and 7 others 10
Zero Posted December 15, 2020 Author #27 Posted December 15, 2020 The boats from Trumpter are definitely disaster. The cockpit from those boats are solid square. I decided to use Veryfire for the replacement. 🤗 mtaylor, Landrotten Highlander, popeye the sailor and 10 others 13
RGL Posted December 15, 2020 #28 Posted December 15, 2020 I’m loving your work Zero mtaylor, Canute, lmagna and 3 others 5 1 Greg
Zero Posted December 19, 2020 Author #29 Posted December 19, 2020 On 12/15/2020 at 4:13 PM, RGL said: I’m loving your work Zero Thank you! I always refer to your work before I did my part. mtaylor, lmagna, Canute and 2 others 5
Zero Posted December 19, 2020 Author #30 Posted December 19, 2020 Masts, Radar & crane😇 Landrotten Highlander, Old Collingwood, ccoyle and 8 others 11
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now