Jump to content

Misainier by Gbmodeler - FINISHED - Small French fishing boat of the early 1900's


Recommended Posts

Really enjoying this build and I think there is a lesson to be learned here, if I am able to remember it and absorb it.   I see this build as the scratch build analog of that post elsewhere on this site warning beginning kit modellers to start with smaller, simpler kits and not jump right into a Constitution or Victory.   After building several kits I start to contemplate trying a scratch build, but I imagine boats that are on the same complexity scale as the kits I have built.   But, it would make far more sense build something smaller and simpler for a first scratch build, to get practice doing the research, figuring out how to read and convert the plans you have, and determining how to fabricate and assemble the pieces to best represent the original.   And your build superbly demonstrates that even a small, relatively simple scratch build can exercise and demonstrate craftsmanship and can result in an attractive and interesting little model. 

 

So, well done on the build so far and thanks for the lesson, if only I can really learn it.  I guess we'll see after I get another kit or two under my belt.

- Gary

 

Current Build: Artesania Latina Sopwith Camel

Completed Builds: Blue Jacket America 1/48th  Annapolis Wherry

 

Link to comment
Share on other sites

2 hours ago, gsdpic said:

Really enjoying this build and I think there is a lesson to be learned here, if I am able to remember it and absorb it.   I see this build as the scratch build analog of that post elsewhere on this site warning beginning kit modellers to start with smaller, simpler kits and not jump right into a Constitution or Victory.   After building several kits I start to contemplate trying a scratch build, but I imagine boats that are on the same complexity scale as the kits I have built.   But, it would make far more sense build something smaller and simpler for a first scratch build, to get practice doing the research, figuring out how to read and convert the plans you have, and determining how to fabricate and assemble the pieces to best represent the original.   And your build superbly demonstrates that even a small, relatively simple scratch build can exercise and demonstrate craftsmanship and can result in an attractive and interesting little model. 

 

So, well done on the build so far and thanks for the lesson, if only I can really learn it.  I guess we'll see after I get another kit or two under my belt.

I really appreciate your observations gsdpic!  Besides the chance to research, gain experience and improve one's skills, I really enjoy the simpler models because they can be finished much more quickly.  The sense of accomplishment provides encouragement for bigger projects down the road!

Edited by Gbmodeler
Link to comment
Share on other sites

Yesterday was "rudder and tiller" day.

 

The rudder started life as a sheet of 1/16" thick basswood.  Parts were cut and shaped based on drawings and glued together with PVA (white Elmers) glue.

E8406B41-3C4E-4D37-B2BA-E53797BABCD0.thumb.jpeg.b89878c6df8a0897c2f86445556f4e0d.jpeg


Gudgeons were prepared from short sections of brass tube.  The tube cut nicely by lightly rolling it under the knife blade.

30B6221A-5B70-4EC4-A5DF-28C33EC2A70A.thumb.jpeg.872ca002e064337f6e5129768444f73d.jpeg
 

A pin was used to provide alignment as the little tubes were attached to the hull with gel CA glue.  The gel variety sets slower so adjustments can be made, but you still have to work quickly...

DF8760E7-CC96-4433-A8B6-C5DD1B32AE46.thumb.jpeg.c533713757800c7b0bfec70ceaf25a06.jpegE6FE1789-6DE2-459E-BE78-2E6E86943C41.thumb.jpeg.c930b2be46302cab9e4309e3178e705c.jpeg

 

Pintles were installed into the rudder using a pin vice and piano wire, pre bent at a 45-degree angle.8A9B5139-33A5-4F1D-A247-2E3BB7177730.thumb.jpeg.aae657dd5a959ee32c686e1293e02b41.jpeg

 

Braces and hinges were fabricated from thick construction paper and attached with PVA glue.52352102-AE68-4F94-9350-59B918A67762.thumb.jpeg.1b4d5f896556ad8c483d23d585ee014c.jpeg

 

Here you can see the (almost) final product.  The top pintle is long, and goes through the top two gudgeons (as per photos I saw of real boats).   You will notice that the top hinge is shiny.  This piece of construction paper was applied after the rudder was slid into place and has been reinforced with a coat of CA glue to give it added strength.  Because of it's position, it "locks" the rudder in place (i.e. the pintles can not lift up or unship from the gudgeons).  All this adds up to working rudder!  I plan to add rivets to all he paper parts using 3-dimensional rivet decals. 

6485A5E4-37A2-4AB3-A7EC-71479C6DAE83.thumb.jpeg.ba510a89b23f6cec51341341b36f07d3.jpeg
 

The tiller started life as 1/16" basswood strips.  These were bent by soaking briefly (a couple of minutes in water) and ironing with a clothes iron around a curved former.  They are pre-stained so glue doesn't block the application of stain later...962557B1-1106-4C10-9DBE-6B0BA62EE4A4.thumb.jpeg.d9adc6df4243f6b64625178d21a742dc.jpeg


Here the strips are glued together and shaping beings (mainly with a sanding block).

9122D635-FF78-474C-A26B-24D8DEB28D7C.thumb.jpeg.4286270000787f117f6427671eb66832.jpeg
 

The final product is tiny, compared to a common toothpick...

B0A36F21-5A23-411A-B970-98E7EBC05443.thumb.jpeg.b4379e7f882934798342cc27fa6d0ff8.jpeg

 

Now we can steer!

1F3A6A76-4400-4D90-96E0-2D2135666158.thumb.jpeg.f27db0f74d8f3aaef79280426d41ee2f.jpeg

955A99D4-6930-4BB7-8C72-7D2AFF293D1D.thumb.jpeg.689e3e537af72cbf29bd93e13f0d996d.jpeg

Edited by Gbmodeler
Link to comment
Share on other sites

This boat is looking great! I keep learning...Moab

Completed Builds:

Virginia Armed Sloop...Model Shipways

Ranger...Corel

Louise Steam Launch...Constructo

Hansa Kogge...Dusek

Yankee Hero...BlueJacket

Spray...BlueJacket

26’ Long Boat...Model Shipways

Under Construction:

Emma C. Berry...Model Shipways

 

Link to comment
Share on other sites

Adding little (but important) details now.  The first is the "paille d'etrave" which translates to "bow straw."  The clew of the sail was attached to this metal rod that ran through the top of the stem post.  It was reinforced with a metal band.  I substituted construction paper for the metal band, but the rod is steel piano wire😃.  You can also see I added bollards:  two fore and two aft.  The bollards are placed above false frames to simulate extended timberheads...80FE2110-F013-4C72-ADDE-B4918EC16396.thumb.jpeg.8c29ea52a9d22a3bd0b452565b476b58.jpeg

4FF9D1AF-BA03-47CC-A901-9E8F15932DEB.thumb.jpeg.c407cacb8a2c5857510a8a6df2fb187b.jpeg

 

48819D48-F4D6-42F3-91D8-4517E7AA664A.thumb.jpeg.e1224d7c5119f25f7b67a86331bb9949.jpeg

 

After coating the rudder with an enamel gloss coat, I set about adding the rivet decals.  Here is what I used...CC0015D2-16A9-4332-985C-EE31235F2989.thumb.jpeg.8e8d2ffc3dd582233734fff680d8510d.jpeg

 

Here's the (almost) final result with another layer of gloss coat to protect and seal the decals.4AA6D072-3728-4596-AF4A-795B1EE014BE.thumb.jpeg.b89a7478091e7013f384698afa5ef5e0.jpeg

 

 

Link to comment
Share on other sites

Painting the waterline comes next.  I find this a nerve-wracking exercise but it does seem to get easier as I build more boats.  I start by setting the model down on a flat surface, level to the waterline.  This often takes props to get the waterline level.  In this case, a little cardboard stand serves the purpose.  The stand is taped to the table top and putty (Silly Putty) helps to "lock" the model in place. 6A5D0A16-F902-49CB-ABA2-5035C46E5A16.thumb.jpeg.a5afeecf029e316f5e004322ebcbcb24.jpeg
 

A small level keeps things even in the other direction.

72239442-5840-4A5F-A06E-D4CBC40D41CE.thumb.jpeg.bcdeda0233e1137e27cb6281b06354eb.jpeg


I use wood blocks for spacers to set the pencil at the correct height.  In this case I added a weight from a dumbbell set.  Modelers can't get too much exercise you know... 

D08684C3-90FF-4DC6-A21F-EBAB13999405.thumb.jpeg.ed908585b696205a99291060cac60be8.jpeg


The pencil line...

E3242B09-368A-49D9-8BC2-B241D4308EB6.thumb.jpeg.1bd824856856c645e155d77e3f409636.jpeg
 

Masking the upper hull...
7943A8EF-57A8-4ED9-9491-46CECD6D6958.thumb.jpeg.95d029d733a472036e52c88d61239ff6.jpeg

 

The final product, airbrushed on.

AEBBD143-F751-4CF2-91B7-A61544DB0343.thumb.jpeg.dec82e1560bc8e21a966f8acd386af2a.jpeg


 

Link to comment
Share on other sites

Wow, neat!

Thanks for the tutorial. I have that job down the line soon on my build...

 

Keep it up!

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

Been busy applying decals, painting trim, and building the mast.  The mast was a wood dowel tapered slightly toward the top by sanding.  Then bits and pieces were added to simulate the internal pulley at the top.  Again, black construction paper was used to simulate metal bands.

5EB3FE01-A6E3-4C68-9D51-5FC0171FE234.thumb.jpeg.9a18944a50f08080eb504ef4005379b5.jpeg
 

The mast was stepped and wedges installed as I have seen in photos of real boats.

16612E0F-E4F1-4153-8133-1D4E3E2C789B.thumb.jpeg.594faa34b839a675163f488211eed118.jpeg


You will also notice the belaying pins from Falkonet.

B177CA89-C5D9-4C61-A1DE-E5A36FB82BF8.thumb.jpeg.c9f75fb45c73337f6ea7feb06bf327a8.jpeg
 

Further research indicates the boat I wanted to build (Petit Georges) was sloop rigged.  I wanted the more typical lug rig, so I decided to change boats.  This is now the "Mirabeau" from Douarnenez, 1906.   Decals are water-slide, individual letters made by Microscale for model railroads.  The font is called "ornate."

15F9866D-D8B6-45B2-9422-B800CD2D0C91.thumb.jpeg.047137909ba0bbe72cf5f97a09216f87.jpegCEEEB90F-C83D-4D29-8F89-3A430CD8F22A.thumb.jpeg.9211ba5630d3fc0a2a46bcc2400ca4e0.jpeg
 

You might notice a little "dry brushing" on the rudder....
EC2C71CE-9A4E-429E-A95F-ADD2FD9E5614.thumb.jpeg.3d36db9a8f2d319648ed44df79054d62.jpeg

Link to comment
Share on other sites

Exquisite, the realism is remarkable for such a little boat. 

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Building the sail today using paper, wire, thread, acrylic paint, and powdered paint pigments.
 

Finished paper construction with wire embedded in the trim for bending the sails later...
F6942866-FE92-4CC5-A904-162470858807.thumb.jpeg.32f8e199e2e52247810b07c7ba06293f.jpeg

The painted sail (using Tamiya Acrylic model paint mixed from various colors)...

80FA1050-B5B2-4856-BC5E-075CB65AE9DF.thumb.jpeg.e860829cc79aa80a81686ed88bce53c4.jpeg

After powdered yellow ochre paint pigment is rubbed in... 

8AD57331-121D-4960-B681-71F7B5DCBA7E.thumb.jpeg.dded6494e395347a62882ae30f29cfd4.jpeg

 

 I have posted before in more detail on my methodology for paper sail construction while building a Scottish Fifie (middle of page 2).  https://modelshipworld.com/topic/27283-fifie-by-gbmodeler-finished-scale-148-typical-late-1800s-scottish-herring-drifter/?page=2

 

Edited by Gbmodeler
Link to comment
Share on other sites

These little boats always seem to have oars lying about, so oars are a necessary feature for the model.  My oar construction starts with three lengths of 1/16-inch basswood strip, cut into two pieces at 10mm and one piece at 100mm.  The smaller strips are glued with PVA at one end of the long strip.069E15A9-D92A-4C61-A775-062178EC633C.thumb.jpeg.01159681f158e36986a2b4ae93bc6854.jpeg


After a few minutes of drying time, I start rounding the shaft by sanding down the corner edges.

7F10AEF5-3B93-4FE2-A660-09EED4F28AB3.thumb.jpeg.0823a6dfbf3493cd0692eb5d583e04d5.jpeg


With the edges gone, you can twirl the oar in some folded-over sandpaper, creating the final rounded shape of the handle.

9BD068C2-2A6E-4DCB-B314-D7463F395F9F.thumb.jpeg.f0aecceaf25aa0bd1fb6852d9c105985.jpeg

 

Next, I start sanding down the edges of the paddle.

040127DC-12A2-4854-8A6F-5F261669E4C4.thumb.jpeg.a1adf18e38dd971053cdc182533f5eca.jpeg

27EDA6B3-FE1F-4CD3-8283-522745F254BF.thumb.jpeg.2cf1d53f721e26ea298c901ed98dbb5f.jpeg
 

Then, two corners of the paddle are filed to provide taper from the shaft to the paddle...

0923A312-AE10-4486-AFB6-E5B21941AF7A.thumb.jpeg.c3093221b4c7c9321d5a8ba83753f388.jpeg

 

...and the paddle is sanded flatter and shaped.  I use a home-made sanding block and/or sanding stick.

BA1BD97F-B0DC-44C8-B6AF-B45B33E681B2.thumb.jpeg.468baded503b6135b7c384c917e0eee0.jpeg

 

Here is an almost-finished oar next to one which has not yet been shaped. 

4A6EC98C-06BD-4666-B3E0-C0923B94232D.thumb.jpeg.28d38c1473514caa64190f59316635c8.jpeg
 

Both oars are done and stained now. 

173282EB-3D41-4F7C-9C69-1D79ADDDDC05.thumb.jpeg.ada6c50765e2c609c8868dc2201cad72.jpeg

Decided to give them a little character with a handle end, using a round file...

030DDEDB-8C6F-44C4-9AB3-A679FD100708.thumb.jpeg.3d60d502fc3b698b6db01b7af47cbb22.jpeg

It takes me about 20 minutes per oar to get this far...

8C23A6DB-5C61-4908-B116-F6452E1EA6A9.thumb.jpeg.2db6ab9a1553b1d25ccf0382370eb862.jpeg

A little weathering is added....

10BA3DF3-AAD0-4EFD-9B02-C9C182A0C181.thumb.jpeg.b7486a4537efdf07e52bb31972e41779.jpeg
 

And finally, with a little color added for "feng shui," the oars are installed in the boat.

EA30D892-CFD9-4489-8B26-A9583A00866F.thumb.jpeg.0d3b3fc0e461d69b505ff3323f228ac0.jpeg

Link to comment
Share on other sites

GBmodeler, I just finished reading through your build log, very interesting model you choose.
I am curious why this type specially, but then looking at your username my guess you are from Great Britain, please correct me if I am wrong.

We are many builder in MSW from Washington state.

And as a former Spokanite (www.merriam-webster.com/dictionary/Spokanite

Spokanite definition is - a native or resident of Spokane, Washington.) , it's great to see more of us in here.
 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

4 hours ago, Nirvana said:

GBmodeler, I just finished reading through your build log, very interesting model you choose.
I am curious why this type specially, but then looking at your username my guess you are from Great Britain, please correct me if I am wrong.

We are many builder in MSW from Washington state.

And as a former Spokanite (www.merriam-webster.com/dictionary/Spokanite

Spokanite definition is - a native or resident of Spokane, Washington.) , it's great to see more of us in here.
 

Thanks Nirvana!  No, GB is not Great Britain, but my initials (George B).  I just really like these little French boats!  Thanks for the nod.  Go Zags!

Link to comment
Share on other sites

Wonderful build, with great details about the construction. A great pleasure to watch. Thanks!

 

Tony

Link to comment
Share on other sites

Nice, Well done GB!

*Rumbling applause from the audience*

About display, do you put them in different spot in your home or are they gathered in a case of some sort?

Would love to see the collection 😉 

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

Having that penny as a reference is great, you really get the sense of details and size of this little model.
Great job!

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Link to comment
Share on other sites

That photo of the boat in the display stand is a “knockout.”  Congratulations for crafting a beautiful, beautiful boat...Moab

Completed Builds:

Virginia Armed Sloop...Model Shipways

Ranger...Corel

Louise Steam Launch...Constructo

Hansa Kogge...Dusek

Yankee Hero...BlueJacket

Spray...BlueJacket

26’ Long Boat...Model Shipways

Under Construction:

Emma C. Berry...Model Shipways

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...