La Mahonesa 1789 by native one - scale 1/48

[native one]

With the deck down in the hold done,I can began building the storage rooms,towards midship the beams are two piece which are milled out then fine tuned with files,not very complicated work to be done but  i ⁹really have to pay attention to where parts of the deck beams cut thru the walls in places.

Edited March 22, 2023 by native one
Wrong wording

[native one]

finished all the storage rooms in the rear of the hold,then milled out all the two piece beams midship, still need to mark out and cut in all the notches in the beams for the carlings, began working on the storage rooms in the forward part of the hold,alot of metal work in this area because of the four doors in this area.

[native one]

[native one]

After a long break due to my job and the days getting shorter I am back in the shipyard able to continue on the Mahonesa's, filled in the planking between the gunports and continuing with the deck beams of the orlop deck,and finished up the storage rooms in the bow of the ship.

[No Idea]

Glad you’re back building again - the work looks fantastic 👍

[scrubbyj427]

Welcome back! Your lower deck structure is looking really good.

[native one]

Finished the waterway that sits right up against the hull,and pretty much just been in the shop milling up all the lumber in preparation for doing the deck.

[native one]

Before starting on the decking of the orlop I decided to plank between the waterway and spirketing in the stern of the ship,kind of a tricky task on the Mahonesa's because the waterway starts out nearly flat then makes a gradual climb towards the deck clamps,the bend of the planking in the stern area is so much that I had to make templates for every piece then cut each piece out of thicker material then sand in the curve top and bottom before fitting them in place.

[a.sorolla]

Hi

Indeed, they are pieces that have some complexity inside the stern of the frigate La Mahonesa at the level of the cóck pit., but you have solved it very well.
Good continuation

 

Adrián Sorolla

 

 

[Tobias]

Your work is absolutely fantastic, great job you are doing.

[native one]

Began the decking of the orlop deck,beginning with the binding strakes notching them into every beam and leaving them thick enough so there is room for the ledges to be notched into them.

[native one]

Finished putting in the ledges and began planking the center between the binding strakes,now I need to decide if I am going to completely plank it or leave some of it unplanked to view the deck underneath.

[druxey]

It would be a pity to hide all that complex work! Very impressive, N.O.

[No Idea]

I agree - wow mate that is seriously impressive work and needs to be seen 

[native one]

So I  have decided to leave some of the decking of the orlop off so people can see the deck framing and hopefully some of the rooms in the hold,but not to much , I  would like the rooms and bulwarks in the stern to have a solid base under them.

[the learner]

You have a fantastic build and the pictures are perfect

[native one]

Finally came to an decision on how much deck I was going to leave off,just enough so you can view some of the lower deck structure but I retained enough in the stern area so when I get around to building the bulwarks and quarters there will be enough decking underneath to give them support,now for the tedious job of nailing the deck off.

[native one]

Finished nailing off the deck,built the hatchways for the coal storage and access to the light room and powder magazine, have the first three deck beams made up in the bow so I can secure the posts for the riding bitts and the bowsprit support 

[native one]

Finally finished planking the interior of the hull,then proceeded to the stern to began building the bulwark that separates the gunner room from the rest of the officers quarters, then realized I  need the deck beams temporarily in so I can build the  walls of the rooms up to and around the beams.

[KLarsen]

It looks amazing! 

[native one]

Finished making up all the deck beams and now I am beginning to work on making the officers quarters, 

[native one]

Finished the officers quarters and now making grates to cover the hatches,and start working on the enclosure around the mainmast and pump tubes.

[native one]

Cold weather has come around in my part of the world,so time to pull the dust cover off the Mahonesa's and resume working her,not much has been done,still working on the gundeck beams and building the gratings,need to build a different stand so I can mount the rudder and began working on the tiller and sweep.