Ronald-V Posted July 7 Share #541 Posted July 7 Love those detail photo's! Outstanding work AJohnson and Glenn-UK 1 1 Quote Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 7 Author Share #542 Posted July 7 8 minutes ago, Ronald-V said: Love those detail photo's! Outstanding work Many thanks Ronald-V and AJohnson 2 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 7 Author Share #543 Posted July 7 Bits and Pieces I spent today doing some bits and pieces as I near the completion the Indy. My first task today was to build the 4 off anchors. They are now ready to be installed. The various missing armaments were then glued in place. I also fully populated the various bitt racks with belaying pins. I thought I had misplaced the Indy's lanterns and ordered two new ones. Later on in the day I actually located the kit supplied lanterns. They have now been assembled, dry fitted to the Indy and the support frames painted. They are now ready be be installed. The final task today was to add the stunsail booms to the fore / main yards and fore / main topsail yards. Tomorrow I will add the anchors and lanterns to the Indy. I will then add the knotted footropes to the bowsprit and spritsail. The final task will be to assemble and mount the Indy of the display stand so she is ready for her final photo shoot. I have just ordered the HM Brig Adder which will be my next build. I will start a build log for the Adder once the kit has arrived. rcweir, brunnels, ECK and 9 others 12 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #544 Posted July 8 Anchors and Lanterns Today I installed the 4 off anchors and 2 off lanterns to the Indy. With regards to the main anchor I did toy with the idea of rigging a block through the davit, as shown in the following example. As I could not seem to pass the rigging thread through the holes in the davit I ended up rejecting this idea. I am reasonably happy with how the anchors look. Next the two lanterns were installed, a bit of touch up of the painting is required. I have now completed this wonderful kit. I will be taking a full set of completed photo tomorrow morning using my white backdrop as there are too many shadows from the sun to take them this evening. I did take a couple however for this post. and will be taking a full set of the completed Indy tomorrow. In th brunnels, ccoyle, ir3 and 18 others 13 8 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
chris watton Posted July 8 Share #545 Posted July 8 Very well done, Glenn, you have come a very long way in the space of only a few years. Your Indy looks magnificent. Glenn-UK, Ryland Craze, AgesOfSail and 2 others 4 1 Quote Vanguard Models on Facebook Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #546 Posted July 8 2 minutes ago, chris watton said: Very well done, Glenn, you have come a very long way in the space of only a few years. Your Indy looks magnificent. Many thanks Chris. Brig Adder next! Ryland Craze, chris watton, AJohnson and 1 other 4 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
scrubbyj427 Posted July 8 Share #547 Posted July 8 Beautiful job Glenn! It’s been fun to follow along. JJ Ryland Craze, Glenn-UK and AJohnson 2 1 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #548 Posted July 8 Just now, scrubbyj427 said: Beautiful job Glenn! It’s been fun to follow along. JJ Thanks JJ scrubbyj427 and AJohnson 2 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
AJohnson Posted July 8 Share #549 Posted July 8 Brilliant work Glenn, a very impressive looking model. Glenn-UK and Ryland Craze 1 1 Quote Andrew Current builds:- HM Cutter Trial - Vanguard models (1/64), HMAV Bounty - Caldercraft (1/64), Hawker-Typhoon-1b-"Car-Door" - Airfix (1/24) Completed:- "Nisha" - Vanguard Models (1/64), HMS Orestes(Mars) - Caldercraft (1/64), HM Cutter Sherbourne - Caldercraft (1/64), TSS Earnslaw - Paper Shipwright (1/250), Puffer "Starlight" - Paper Shipwright (1/250) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #550 Posted July 8 1 minute ago, AJohnson said: Brilliant work Glenn, a very impressive looking model. Thanks Andrew AJohnson 1 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
wvdhee Posted July 8 Share #551 Posted July 8 She's gorgeous! Glenn-UK, AJohnson and Ryland Craze 2 1 Quote Walter. Current build: Thinking about it Finished build: HMS Flirt Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #552 Posted July 8 15 minutes ago, wvdhee said: She's gorgeous! Thanks AJohnson 1 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
James H Posted July 8 Share #553 Posted July 8 Outstanding! Your best yet! Certainly imposing once the rig is done. AJohnson, Ryland Craze and Glenn-UK 2 1 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
Thukydides Posted July 8 Share #554 Posted July 8 Fantastic Glenn. She is quite the model. AJohnson, Ryland Craze and Glenn-UK 2 1 Quote Current Builds: Type VII C U Boat (HobbyBoss); HMS Perseus (Scratch) Completed Builds: HM Cutter Alert (Vanguard Models) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #555 Posted July 8 12 minutes ago, James H said: Outstanding! Your best yet! Certainly imposing once the rig is done. Many thanks Jim AJohnson 1 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 8 Author Share #556 Posted July 8 8 minutes ago, Thukydides said: Fantastic Glenn. She is quite the model. Thanks Thukydides and AJohnson 2 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Ronald-V Posted July 9 Share #557 Posted July 9 Congratulations with finishing this monumental task! Well done! Glenn-UK and AJohnson 1 1 Quote Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #558 Posted July 9 14 minutes ago, Ronald-V said: Congratulations with finishing this monumental task! Well done! Many thanks Ronald-V and AJohnson 2 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Craigie65 Posted July 9 Share #559 Posted July 9 Lovely build, congratulations! Glenn-UK and AJohnson 1 1 Quote Cheers Craig Current Build HMS Indefatigable Erycina - Vanguard Models Finished: HM Bomb Vessel Granado - Caldercraft, HMS Pegasus - Victory models, Nisha - Vanguard Models Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #560 Posted July 9 38 minutes ago, Craigie65 said: Lovely build, congratulations! Many thanks Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #561 Posted July 9 Many thanks to everyone who has followed, commented and liked my posts for this build log. I have really enjoyed building the Indy. It is an awesome kit. My next project will be the HM Brig Adder which I am really looking forward to start building once the kit arrives, hopefully later this week! I have taken a selection of some good photo's and some not so good photo's of my completed model. BLACK VIKING, davyboy, chris watton and 15 others 8 1 9 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
DB789 Posted July 9 Share #562 Posted July 9 An absolutely stunning model - congrats! I’ve really enjoyed following your build of her. Glenn-UK and Ryland Craze 1 1 Quote Dan Current Build: Yacht Duchess of Kingston (Vanguard Models, 1:64) Previous Builds: Fifie (Vanguard Models, 1:64), Nisha (Vanguard Models, 1:64), Zulu (Vanguard Models, 1:64), Saucy Jack (Vanguard Models, 1:64), Erycina (Vanguard Models, 1:64), HMS Alert (Vanguard Models, 1:64), Grecian (Vanguard Models, 1:64), Ranger (Vanguard Models, 1:64), HM Gun Brig Adder (Vanguard Models, 1:64) Waiting to be Built: Speedy (Vanguard Models, 1:64) Link to comment Share on other sites More sharing options...
Blue Ensign Posted July 9 Share #563 Posted July 9 Well done on completing this behemoth Glenn, she certainly has presence as a fully rigged model. 👍 B.E. Ryland Craze and Glenn-UK 1 1 Quote Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation. Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #564 Posted July 9 1 hour ago, DB789 said: An absolutely stunning model - congrats! I’ve really enjoyed following your build of her. Thanks Dan. I will using your Adder log as a point of reference when I start the Adder DB789 1 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #565 Posted July 9 6 minutes ago, Blue Ensign said: Well done on completing this behemoth Glenn, she certainly has presence as a fully rigged model. 👍 B.E. Thanks Maurice Blue Ensign 1 Quote Glenn (UK) Link to comment Share on other sites More sharing options...
ccoyle Posted July 9 Share #566 Posted July 9 Well, that is impressive! Glenn-UK and Ryland Craze 1 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #567 Posted July 9 38 minutes ago, ccoyle said: Well, that is impressive! Thanks Chris Quote Glenn (UK) Link to comment Share on other sites More sharing options...
brunnels Posted July 9 Share #568 Posted July 9 Beautiful model, I really enjoyed your log. Ryland Craze and Glenn-UK 1 1 Quote Current Build HMS Sphinx, Vanguard Models 1:64 Scale Finished Builds: HMS Beagle Link to comment Share on other sites More sharing options...
Glenn-UK Posted July 9 Author Share #569 Posted July 9 26 minutes ago, brunnels said: Beautiful model, I really enjoyed your log. Thanks Quote Glenn (UK) Link to comment Share on other sites More sharing options...
flint_sky Posted July 9 Share #570 Posted July 9 Congratulation! Amazing job! can’t stop looking on all these images. i can believe that such beautiful models kit can exist. Bought myself Sphinx. Can’t wait to start it! Glenn-UK 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.