La Mahonesa by KLarsen - Scale 1/48 - stern cross-section

[Mike Y]

Very nicely done! Can't believe it is your first POF and you started with the stern section, probably the most challenging part of the hull  

[KLarsen]

10 hours ago, Mike Y said:

Very nicely done! Can't believe it is your first POF and you started with the stern section, probably the most challenging part of the hull  

Thanks! That's exactly why I chose the stern, if I can build that I can build the whole ship 😄

[dvm27]

You know, you could just scarph that keel joint and add the midsection and, if that goes well...

[Chuck]

Such a nice looking model.  You are really doing a fine job.  I will be following along.

[KLarsen]

6 hours ago, dvm27 said:

You know, you could just scarph that keel joint and add the midsection and, if that goes well...

Hahaha, trust me, I've thought about it 😂

Most likely though my next project will be La Diligente, a french tartane from the Ancre monograph. Lateen sailed boats are my favourite so it's something I'd like to "specialise" in.

 

6 hours ago, Chuck said:

Such a nice looking model.  You are really doing a fine job.  I will be following along.

Thank you! 😊

[kevlar]

Hello, I am of the same opinion as KLarsen and before starting a long-term project of a complete ship, with all that it implies (time, money...) I must know if I have the minimum and necessary skills to solve complex and important issues and not have a lot of wood for firewood. I have read some threads in which problems have made them abandon the project. There are people who are just starting their tests like KLarsen and others like me who have been trying for a long time

Congratulations KLarsen, I have been following your project and it is great

[KLarsen]

After posting the pictures the other day I found out I'd installed the lower decks clamps a little too high up, though I was able to remove them using a hair drier and reinstall them a little lower. I also installed the thickstuff (I think they're called?), the 2 x 3 planks running along the inside. This is most likely all the inner planking I'll add.

I also added nails on the upper bulwarks. I used 0,3mm copper wire here, the 0,5mm I've used elsewhere seemed a little too think for these planks.

With this I can get started on the decks, first will be the platform in the bottom where the powder room is. I've yet to decide how many bulkheads I'll install, I want the interior to be visible while also giving an idea of how cramped it was.

 

Again, thanks everyone for the kind comments and likes, it's much appreciated! 😊

[druxey]

Nice, meticulous work!

[KLarsen]

It's finally time to get started on all the interior stuff. I've installed the platform for the powder and munitions room, and today I finished the bulkhead between the powder room and the lantern room. I won't be adding any glass in the panes, I think that'll just distract from the look.
I'm really happy with how the window turned out, if I can do as well with the big stern windows I'll have no complaints!
The only thing I'm not happy with is how the inner planking terminates at the very stern; it was difficult to bend them and almost impossible to sand them there. However, most likely it won't be seen at all when the bulkheads and deck planking is in place. It's always nice when you can just hide your sloppy craftsmanship! 🤣

[KLarsen]

I'm finishing the munitions and lantern room and planking the platform above them. I haven't decided if I'll fully plank that deck or not, planking it will completely hide the lantern room but will make it easier to install the bulkheads above.
I'm also fitting the beams for the orlop deck which are necessary to install the pillars supporting the mizzen mast. It really is a puzzle finding out which pieces to install and when.
The deck is planked with wooden nails but they are hardly visible (like on a real deck).

[Pirate adam]

Wow that is really looking great.  I love how the window turned out.

 

Adam

[KLarsen]

I decided to go ahead and fully plank the platform as well as install all the panels separating the rooms and corridors.

I'm well aware that it'll hide a lot of the details like the lantern room, but it seemed the best way to show how cramped the ships interior was.

I'll also install the bulkhead behind the platform (the lower plank is already in place) even though it will completely hide the sail room behind.

With this, I can install the last deck beams for the orlop deck and decide how much to plank it, whether entirely or just a few planks.

[Ronald-V]

Beautiful work!

[KLarsen]

While I won't be installing any LEDs I couldn't resist simulating the light coming from the light room.

Also, I installed the last deck beams for the orlop deck. Now comes the difficult task of creating the crazily curved waterways. I'll probably have to cut it from a sheet as there's no way I'll be able to bend a strip to follow those curves at the stern.

[KLarsen]

To create the waterways for the orlop deck I first built up a template from thick crafting paper, then cut out the piece from wood and shaped it. It was the only way I could think of to get the complex curves correct.

The plans don't show how the deck planks would be fastened at the very end, so I created a small piece and put it on the deck clamp. It's far from perfect but it won't be possible to see it once the deck is planked.

I'll most likely plank the whole insides of this deck up to the main deck clamp, including the stern. Especially because I don't like the way the stern is looking right now where you can see the back of the outer planking.

[KLarsen]

Question: Does anyone know how the middle deck planks should terminate on the keelson? The plans don't really tell. I could either just make the planks butt up against the keelson or glue a strip onto the keelson and let the planks rest on that, nailing them in place. I'm leaning towards the last solution, I'm just wondering how it would have been done on the real ship.

[KLarsen]

Continuing with the deck structure. I'll probably only install 2 more planks either side and leave the rest open except for the middle, which will be completely planked.

[bdgiantman2]

On 11/3/2024 at 11:31 AM, KLarsen said:

Question: Does anyone know how the middle deck planks should terminate on the keelson? 

My guess is that the planks would butt against the keelson, that is what happens in the other ships. Great building project, this is looking great.

 

Brian D

Edited yesterday at 03:25 AM by bdgiantman2