russ Posted November 13, 2013 #31 Posted November 13, 2013 John: Nice looking joints on the stem. Good work. Russ T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB
BANYAN Posted November 13, 2013 #33 Posted November 13, 2013 Slowly but surely John; all is looking good. cheers Pat If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Jim Lad Posted November 13, 2013 Author #34 Posted November 13, 2013 Thanks, Pat - slow she certainly is at the moment! John
michael mott Posted November 13, 2013 #35 Posted November 13, 2013 Good to see progress John. Michael Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
captainbob Posted November 14, 2013 #37 Posted November 14, 2013 John, Nice start. With my schooner plans I need to pay special attention to yours. No pressure, it's all just fun. Bob Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
Jim Lad Posted November 14, 2013 Author #38 Posted November 14, 2013 Don't pay too much attention to what I'm doing, Bob - you might want to do it right! John
captainbob Posted November 15, 2013 #39 Posted November 15, 2013 Do you mean to tell me the boy at the museum was right in asking if you were doing it right? John, if the Stag was not right I’ll accept not being right any day. Bob Wintergreen 1 Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
Wintergreen Posted November 15, 2013 #40 Posted November 15, 2013 Do you mean to tell me the boy at the museum was right in asking if you were doing it right? John, if the Stag was not right I’ll accept not being right any day. Bob I was thinking the same, but you beat me to it Bob Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana,
Jim Lad Posted November 15, 2013 Author #41 Posted November 15, 2013 Bob and Hakan - thanks for the vote of confidence fellas! John
gjdale Posted November 16, 2013 #42 Posted November 16, 2013 Now tell that to the nine year old John! Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
Jim Lad Posted November 27, 2013 Author #44 Posted November 27, 2013 Another small update. Yesterday I was able to get the planking rabbet cut on both sides plus some shallow grooves forward to locate the cant frames. Unfortunately our friendly electrician at the museum has done so well in providing extra lighting at the model makers desk that I found it impossible to get good shadow across the model to show up the rabbet line properly, but you can see it at the stern if you look for it. I really must try and find some additional time for the Pritt or it will take the next decade to get anywhere. John Adrieke, druxey, olliechristo and 10 others 13
russ Posted November 27, 2013 #45 Posted November 27, 2013 I can see the grooves for the cant frames. Very nice work, especially at scale. Russ T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB
Jim Lad Posted November 28, 2013 Author #46 Posted November 28, 2013 Thanks, Russ. Things should become more apparent as she progresses. John
michael mott Posted November 28, 2013 #47 Posted November 28, 2013 Another Gem in the early stages of build. Michael Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Jim Lad Posted November 28, 2013 Author #48 Posted November 28, 2013 Well, it's a bit of a rough stone at the moment, Michael, but hopefully she'll polish up ok! John
pete48 Posted November 28, 2013 #49 Posted November 28, 2013 Looks Good, Nice Job Best Regards, Pete "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Jeff-E Posted November 29, 2013 #51 Posted November 29, 2013 Hi John, The keel is looking great. I looked really hard and can Just make out the rabbet line near the stern, but I bet the extra light makes it eaiser to work. Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle
Jim Lad Posted November 29, 2013 Author #52 Posted November 29, 2013 Thanks Jeff. Yes, the extra light is really helpful. We had a stage where every time the electrician came past he'd say, "You f...... blokes can't f...... work in this f...... light. F...... hang on a bit and I'll f...... get some more f...... lights for you." He has a limited vocabulary, but a heart of gold! John olliechristo and Jeff-E 2
popeye the sailor Posted November 29, 2013 #53 Posted November 29, 2013 you should have just answered him........F......antastic! :D Jeff-E 1 I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
gjdale Posted November 29, 2013 #55 Posted November 29, 2013 John, I once knew a Chief Bosun who must have been related to your electrician. To tell me something was broken, he'd simply say, "f...ing, f..er's, f...ing, f...ed". augie and mtaylor 2 Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
Jim Lad Posted December 11, 2013 Author #56 Posted December 11, 2013 Francis Pritt has taken another couple of small steps forward. The basic beam for the stern framing has now been attached with its doublers across the rudder trunking and the first two after frames are ready for shaping. Now she feels like she's about to become a ship! I won't be in the museum again until New Years Day, but in the meantime I need to construct a building frame and get some more wood cut for the frames. John Adrieke, realworkingsailor, augie and 14 others 17
augie Posted December 11, 2013 #57 Posted December 11, 2013 That's an interesting arrangement there John. Thanks for the photos. Enjoy your respite from the museum....and the Holidays! popeye the sailor 1 Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956
Jeff-E Posted December 12, 2013 #59 Posted December 12, 2013 Very nice John looking good Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle
ccoyle Posted December 12, 2013 #60 Posted December 12, 2013 John, Just saw this thread for the first time. Excellent choice of subject! Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now