druxey
-
Posts
12,405 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by druxey
-
Welcome back, Mark! Nice drawing of the quarter galleries. -
Steven: I use old-fashioned brown paper gummed tape, but masking tape is fine. And the acrylic paint I use is very dilute, two or three coats to get the shade or color I want while retaining translucency.
-
Yes; such floor cloths, either on land or at sea, were of heavy canvas called druggets. Like much seagoing equipment, they also appear in theatres as painted floor-cloths. (Also think hemp lines and pulleys rigged in fly towers and other theatrically adapted items, often run by ex-mariners.) Painted canvas was certainly in use during the Restoration era at sea; Stuart Royal yachts had red painted canvas over the weather decking, seen in some contemporary paintings. ( I can't immediately find the reference of a van de Velde showing this on a heeled yacht.)
-
I think that, in the real ships, the floors would have been painted canvas. Real inlay would not last well in damp conditions.
-
Welcome back, Gary! Good to see progress again.
-
(Cleats are those little bumper-like projections on the front of the carriage cheeks,)
-
What Roger suggested is what I do. Stretch SilkSpan on a frame wet and let it dry. It will then be drum tight and without wrinkles. Paint to taste with one or more coats of dilute acrylic paint. I actually paint the seams with thicker acrylic paint using an old fashioned bow pen. The blades are adjustable for line width. Ta da! For very small scales, pencil would be easier.
-
Drying dilute white glue? Have you tried a hair dryer?
- 39 replies
-
- 3
-
-
- Model Shipways
- Muscongus Bay Lobster Smack
- (and 1 more)
-
Keith; what a packrat you are! Those recycled floppy disk pieces made me laugh.
-
It would be a pity to hide all that complex work! Very impressive, N.O.
-
You don't have a wood stretcher in your workshop? Pity. Neither do I.
-
Thank you, Craig!
-
Can you say where this painting is from and a date? Looks about 1830 to 40 to my eye.
-
Eyebolts were always partially embedded as Chuck has them. Nice work!
-
Marking out the run of planking in bands using dark thread and white glue helps plan things, rather than hoping it will work out! Check out the primer on planking in the 'tutorials' section on this site.
-
Check the photos in the instructions for how the rudder should look!
- 87 replies
-
- 2
-
-
- Muscongus Bay Lobster Smack
- Finished
- (and 1 more)
-
If square sterned, the modlel certainly represents a fir-built vessel.
-
Coming along well! As for oxidation(?) I wonder whether the color change is due to air or exposure to light. Skin oils will mark wood, for sure. If a piece gets 'dirty', I clean it using isopropanol.
-
Those open rails were perfect for securing lines around.
-
Looking better and better. You might want to fill and sand the transom ends of the planks until you have a nice flush surface as well.
- 87 replies
-
- 3
-
-
- Muscongus Bay Lobster Smack
- Finished
- (and 1 more)
-
I make the carling scores angled and then cut the ends of the carlings to a similar angle and trim carefully until they fit flush to the beam top.
Our Emblem ®
