Chuck

Its gonna be a while until I build up some stock....but "Chucky Blocks" are coming soon. Lets take a look. Model Expo price for 3/32" single blocks 100 QTY = $20 You know what these look like Lloyd's price ..................................................... = $35 Jerzy's price - 2 mm .......................................... = $45 My price in boxwood will be ............................... = $27 Expo blocks compared to Warner's blocks below My blocks compared to Jerzy;s (Jerzy's on the right) 2mm And another shot of my 2mm blocks...the single blocks on the right have no finish on them yet the doubles have some wipe-on-poly. This is an old image that doesnt show any strop groove. I will have to take some new pics once I start up production. These were basically my tests....I have made some adjustments (sheave slots wider slightly so the holes for rigging can be larger). Hopefully soon.....depending on how much interest in this there is out there.

Here you go guys....some contemporary examples. Yes I used the model in the Rogers collection as my basis for rigging the tiller but you can use these also. Here are two more contemporary models that show a similar approach. Note: that even though the tiller is longer on the Rogers collection model, have a look at how the tiller rigging interferes with the last carronade in its port. After reviewing several other options, I thought it more important to make sure the rigging for the tiller is clear of the last carronade. On Syren and on Argus, the configurartion wouldnt have worked without making the last carronade useless in action. But yes...the two blocks on the deck below the wheel should be added. I omitted them for two reasons. I found a good example in the lightley model which shows it that way...I knew folks would have access to it. The blocks supplied in the kit are huge as you know. They would have looked so out of scale and clunky that I took the aesthetic route and omitted them. If there were any kit builders that didnt take the time to reshape their blocks and just used the square ones supplied....it would have looked absolutely horrific. The tiller is actually much too long on the Lightly model as well. It didnt match up with Chapelle's draft for the Argus or the Syren. I used his reconstruction for the inboard works with the help of English original drafts (raven and others) and contemporary models. Look at how far forward Lightly placed the ship's wheel. I saw no evidence on any other draft that this was done. Compare it to the English models. I also wanted to include the binnacle which Lightly had no place for since he moved the wheel so far forward. He has it lined up with the second port as compared to the way it is shown on the English drafts and contemporary models.

Beautiful work Robert

Wonderful wonderful looking model. I love the balance between the wood tones and painting. Thats a great wood color. Chuck

Nicely done. That iron band for teh bowsprit can be a challenge. It looks well done. Chuck

Bob Yes it works quite well with Boxwood too!! The trick I think is the heat from the hair dryer. It relaxes the fibers. As long as you let the strip cool down and set, it is OK. But like you you said. It must be clamped down to avoid any buckling. Chuck

Bob Wonderful photos. That is exactly how I plank a hull...works a treat and saves a lot of wood. ... Instead of cutting the shaped plank from a wider sheet which ends up with to many scrap pieces. Great demo on the technique. With the strip clamped up, I use a hair dryer on the hottest setting to quickly heat and dry the plank. You can get really close to the plank so it gets really hot. After about two minutes of that, I let the strip rest for another few minutes. This locks in the bend with minimal spring-back. Chuck

Ok folks...the registration form has been added to the bottom of the page... http://www.thenrg.org/2013-nrg-charleston-conference-details.php Dont forget to book your hotel separately...and use the code for the conference discount. Chuck

That would be awesome. Yes it is open to non-members but with the discounts for members...you could join today for $38 and still save hundreds on the trip. There will be a 15% discount on all seminars and tours...etc for members. That includes for spouses and family members. Chuck

I thought I would post these two images of a cross section model from the science museum. I thought it might help or at least act as inspiration for those building teh cross section Triton. What I find very pleasing is the change in the plank thickness. Especially the outboard planking. I have no idea which ship this is as I didnt write that down when I saved it. It is one of hundreds of pictures I saved and now I am trying to organize. Based on what I see it may be a later vessel...but still worthy of inspiration. Chuck

Registration forms will be on the website very soon. I will make another announcement when I add them. Hope to see many of you there. Chuck

Dan Great to see a log from you. Having seen this model first hand, I can tell you it is very sharp. Its a really interesting project and something a bit different than we usually see here on MSW. Thanks for sharing Dan. Looking forward to those small details we were talking about!!!

Wonderful job. I am really enjoying the progress updates. Thank you so much for sharing.

Also...just give me a shout when you need a close up. I have much larger originals and possibly additional photos of what you may be working on. Chuck

I agree...wonderful model.

Its already in there. See this http://modelshipworldforum.com/resources/Framing_and_Planking/Lining%20Off%20your%20hull%20for%20planking.pdf Chuck

Its all on the list.....Just have to find time to get it all done. But I will do so very soon. They are all up on teh Model Expo website but in B& W. So at least they have them available. But I will soon put them on MSW as well. Chuck

Thats the way to do it...perfectly executed. Thanks for the pics. I think they will help many members in the future. Chuck

Congrats!! Well done. Those are very images of a very nice model. Sometimes its bitter sweet to finish a project isnt it?? Cheers!! Chuck

The CONFERENCE Check out the Conference details on the NRG website. There are some great speakers, Interesting tours, Technical modeling sessions, and much more. I think you will recognize many of the speakers from right here on MSW. I am looking forward to it very much...especially seeing the CSS Hunley http://www.thenrg.org/2013-nrg-charleston-conference-details.php THE HOTEL The Crowne Plaza Charleston Conference Hotel will be home base for the Conference. We have arranged a great room rate of $109 for singles and $119 for doubles – the low room rates include the morning Breakfast Buffet. We have arranged for these great room rates to be available for three days before and after the event for those wanting to extend their time in Charleston. The hotel has free airport shuttle and their shuttle will also take us to and from some of the 30+ restaurants in the immediate area, though the food at the hotel is both good and affordable. The hotel is adjacent to the large Tangier Outlet Mall where bargains abound and the hotel’s shuttle will be available to and from the Mall. Let me know if you have any questions. Chuck NRG Director

Its fine as long as the original log author doesnt want to. If that happens I would ask any original log author to contact. It shouldnt be an issue though as most cases it is in response to a request for help and opinions. Should a log owner not want any...then they shouldnt ask. But we will handle it on a case by case basis and I really dont think there will any issues. Chuck

1/2" is good enough. The rigging will hold the mast in place just as it did on teh real ship. Use teh plans to get teh final measurement with the addition of the 1/2" for the hole. Chuck

Ed Love the progress on te model. Great to see it all posted again. Chuck

Because its not on the Model Expo site yet....After many requests here it is by chapter Introduction Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Chapter 17 Chapter 18 Chapter 19 THE END

Nicely done. Very clean Syren build. Looking forward to seeing those fitting start developing. Chuck