Jump to content

dgbot

Gone, but not forgotten
 View Profile  See their activity

  • Posts

    3,993

  • Joined

  • Last visited

 Content Type 

Everything posted by dgbot

  1. dgbot
    When i was a kid scrabble was a required game in our house. I kept a thesaurus / Dictionary by my side. Loser did the dishes. And for a family of 7 that meant a lot of dishes, pots and pans. David B
  2. dgbot
    My bad I was looking at the wrong item. Hint if the melting point is at the upper end of your torches limit it will make it a little difficult to get a clean joint. I found this out the hard way. That was when I went to a jewelry supply house in Chicago to ask some questions and get some advice and the best mat'l for what I was doing. They recommended a liquid flux and a low temp silver solder. The parts I was working on were very delicate and fragile. I took his advice and used a paste with a lower melting point so as to not damage the part. And the one thing he stressed was that the part had to be heated quickly to melt the solder. If I was to slow the part would oxidize before the flux could do it's job and melt the part before the solder flowed. At the upper limit the solder will not flow fast enough. Practice, practice practice. This will give you the feel to get the job done. Right now if I had my torch here. I would have to practice for a while to get the feel again, Good luck. PS make sure you have a fire extinguisher on hand and since you are working with oxygen and flammable gas no smoking or flames near the tanks. Safety first. I did not bring them with me because I respect my sister and do not wish to cause problems. Ed would not be happy about it either. David B
  3. dgbot
    Your post is a keeper. I will be filing it away for future reference. Thanks for going to the trouble. David B
  4. dgbot
    Words escape me Piet your build is something I will remember for a long time. David B
  5. dgbot
    You are learning from your mishaps. To me making a realistic sea is magic. David B
  6. dgbot
    That is a solder that can be used with a soldering iron. David B
  7. dgbot
    Jack, you have done a great job, Wee will have to play the ring trilogy by Wagner for the launching ceremony. I hope you like opera. David B
  8. dgbot
    Part of the control is using the flame. Once the joint has been cleaned and flux applied put a small piece of solder on it ans creep the flame to the joint.. This takes practice when I use the stuff I always practice first to regain the feel. Many times I will use soft solder if I can get away with it. But here is what you can do with silver older. David B
  9. dgbot
    I have used Smith's Little Torch. All you need are regulators for the tanks. I posted a photo of my set up someplace on MSW but I do not recall where. It is a sweet tool and great for little and big parts. Well worth the price. Small disposable propane from the hardware store and a small reusable tank for the propane. Then with practice the flame is more controlled and much hotter than propane. Practice on scrap first. David B
  10. dgbot
    Ahoy cap't did you find out what kind of spirits were in those cask, and did you by chance partake of them. Brandy, Rum. or White Lightning? David B
  11. dgbot
    Your modeling is getting better. I have always been amazed at interior planking and the way it was done. David B
  12. dgbot
    The Swift makes into a nice looking model. You can modify it as well. David B
  13. dgbot
    Years ago I was lucky enough to attend the last WSMC I passed a vendors table with several nice looking models on display. When I took a closer look they looked wrong. One of the attendees asked me what is wrong and I told him. He said that they were China and were showing off some models they build. When I told him what I thought he informed that my suspicion was correct. The Victory, Flying Cloud. Wasa. and several others. Same basic model just a different coat of paint. He told me that they were not looking at us as customers. But for those people who want something nice to talk about and do not wish to break the bank. David B
  14. dgbot
    Too bad AJ Fisher is not open at the moment. They had great fittings. David B
  15. dgbot
    I have been on first name with Murphy for several builds. David B
  16. dgbot
    Nicely done. What did you for the deck to simulate the planking on your deck and what type of paint did you use? Inquiring minds want to know. David B
  17. dgbot
    Brian, have you experimented with cheese cloth? David B
  18. dgbot
    My sympathies, I have the same problem when using a brush. David B
  19. dgbot
    At work there was a job we had to do not that big but several angles, holes and counter bores. It takes me awhile to do them. Most of it is setup. Tom, the lead man usually does it faster but he has been doing this job for a long time, as a result the setup is done in half the time. Practice makes perfect. Repetition. is everything. I remember making brackets after a couple hundred of them I made it look easy. But getting the first 30 were a bear cat to do. David B
  20. dgbot
    Mark, I was told by my grandfather that he who has never made a mistake has never done anything. David B
  21. dgbot
    I echo the same thoughts. Make up some test pieces this will save you headache later down the road. Save and label them and save them. They will help you on other models as well. David B
  22. dgbot
    Needless to say my first smart move The old adage soft wood hard spot then soft equals ouch happened. The blade went through the length and hit the back of my hand. The glove stopped the blade and saved me the hassle of going to the emergency ward and the complications from my meds and the wrath of my dear suffering sister. Hurray for having them on! David B
  23. dgbot
    Chrome is my browser of choice for MSW. For uploading photos and checking out various links. David B
  24. dgbot
    We had a member who did his shrouds off the model and when he put them where they belonged they were ll over the place. David B
  25. dgbot
    My digital camera has several settings from super high resolution 3 mbs to web 33kbs. When I take a photo I use the web setting. When I am using the high resolution, the file gets very large. I take the folder and reduce the photos. That is the easy way to do it. David B

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...