Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

AntonyUK

Members
 View Profile  See their activity

  • Posts

    1,182

  • Joined

  • Last visited

 Content Type 

Everything posted by AntonyUK

  1. AntonyUK
    Hi Jeff. The instructions look good for Amati. Check and double check everything. And anything. I will be following this build as it's the first time I'e seen this kit. Regards Antony.
  2. AntonyUK
    Hi Jack. Stunning work. I never really looked at the lines of this ship till now. WOW I like this beautiful ship. Why is it my photos are rubbish compared to you people. Yours are outstanding. Looking forward to your next progress post. Regards Antony.
  3. AntonyUK
    WOW Nils. What excellent work. She is looking real good. Nice photographic pictures as well.... is there anything you cannot do ?. Regards Antony.
  4. AntonyUK
    Hi David. Yeah they look just fine. A lick of black on the bars will finish it. To straighten wire that is bent. Not spring wire. Cut the wire to length. Place it on a hard surface. Use another hard surface on top and roll the wire. You can tell then it has been straightened. Regards Antony.
  5. AntonyUK
    Hi David. Looking very nice. It's amazing how high these boats were with such a shallow draft. But that's the Mississippi. It's a good job that you are Dry fitting the parts together before glueing. Nice fix. Regards Antony.
  6. AntonyUK
    Hi Morgan. Nice progress with the build. Adding the treeenails as Cedric suggests would make the deck look so much more better. BUT it is a lot of extra work. Sometimes when there is so much deck furniture you cannot notice lack of treenails. Regards Antony.
  7. AntonyUK
    Hi David. Not seen this kit being built before.. Looks a intresting build. Simple mistakes but it's the way we learn. Looking ahead at your next step... we do it every day. Check then double check before you apply and sort of glue. Regards Antony.
  8. AntonyUK
    Hi Morgan. Looking good so far.. That ship is quite some size looking at the photos. You can walk from one end to the other. Regards Antony.
  9. AntonyUK
    Hi Jack. Nice start to your build. I like the support frame. Nicely built and looks strong. Will follow along as you build your carrack. Regards Antony.
  10. AntonyUK
    Hi Nils. Excellent progress and stunning workmanship. I have a few badges with this eagle pose. Never thought to use them as decoration till now. Look forward to your next posting. Regards Antony.
  11. AntonyUK
    Hi. Nils... Yes I wanted till the house was empty and no one could hear my torment. I checked and tripple checked before cutting. Zappto. I am building this for a family member as a display piece. And the planking if of mixed timbers. Kier. Yes the shape of the boat is rather nice and the camber in the deck is what makes this boat special. All the metal work is now made and (painted) The brass rod in the kit would not blacken and yes I cleaned it as I have always done. But this would not take. The copper was no problems at all. Need to seal the sea with a sealer so the silicon will adhere to it. One more coat of Danish oil to the hull and I will place the boat into its final position. Then the rigging will be added. This is already made but not yet added as it's easer to add it later on. Will take a few photos later on today. Weather has been very dark here due to stormed weather. Regards Antony.
  12. AntonyUK
    HI. This is a long overdue update.. No Excuses... .The Deck was planked with ease .. the only thing I would have done of to put reinforcing blocks under the deck where the cleats are. The deck hatches and cabin went together with ease. I planked the hatches and cabin in various wood. The BBQ ... well I think it is was covered with copper tape. and semi blackened. I did NOT want to put any paint on the boat. First picture is stern view. View from Starboard side. View from Bow/Starboard side. View of Port side. More planking on this side. View from Stern/Port side. Stern with 50% of rudder cut off. View of main yard and very large blocks. The next view says it all. Base of boat cut off to allow a shallower display base. This is my first sea scene. made from plaster of Paris with blue paint and water to mix. Looks better with boat in place. And one more of the stern area. When the boat is complete it will be screwed to the base. Then clear silicon will be placed on the water area and be given a ripple texture finish. Never tried this before so fingers crossed and luck on my side. The batten around the base will be removed and some nice timber used to smarten it up a bit. Quite a lot of work on the metal work still to be done and blackened before fitting. Thanks for looking in. Regards Antony.
  13. AntonyUK
    Hi Doodler. Welcome to MSW. Smart move with the swift kit. It better to get to grips with and easer to build. Tlloa the best Antony.
  14. AntonyUK
    Hi KM. Yes that is a large amount of clamps.. Nice to see you started the build. Regards Antony.
  15. AntonyUK
    Hi Al. Nice little project. Will follow along on this one as it makes a nice finished model. Was the original timber not usable or did you just want to use Boxwood timber ? "Better wood" as you said. Regards Antony.
  16. AntonyUK
    Hi K. You seem very clear on what you are doing and have done your resurch. Wish you calm sea's with your build. Regards Antony.
  17. AntonyUK
    Hi Nils. What wonderful work. Now the last photo says it all to me on what a very nice ship this is. Love your work and ideas. Regards Antony.
  18. AntonyUK
    Sounds like my skipper. Regards Antony.
  19. AntonyUK
    Hi Morgan. Nice progress with the build. Shame on DeAgostini for supplying such rubbish. I would contact them by email with the photographs of the affected timber. They are slow to respond but will send you replacements. Regards Antony.
  20. AntonyUK
    Hi Hennie. Wow you are coming along very nicely and as always your skill are outstanding. Like Sjors has said... you risk damaging your beautiful work when doing the bottom planking. I know you are using a pillow BUT your work will be at risk. Regards Antony.
  21. AntonyUK
    Hi David. Excellent progress and workmanship. Your rigging is first class. Regards Antony.
  22. AntonyUK
    Hi Jean. Nice little fishing boat. Should keep you busy for a while. And a nice gift for your daughter in the process. Will drop in now and again to catch up on progress. Regards Antony.
  23. AntonyUK
    Hi Erik. Welcome to MSW. Where are you from Erik ? Nice progress on the Victory. Nice move putting the brass gunports between the planking layers. Also a nice touch is putting the monograms on the cannons. They look like Chucks. Will follow along on this one. Regards Antony.
  24. AntonyUK
    Hi Nils. WOW that so impressive and no breakages is outstanding. As some of them deck beams are so thin. I do love the lines of this type of ship. Keep making my day by posting them wonderful pictures. Regards Antony.
  25. AntonyUK
    Hi Hennie. Just read your build log from start. That is one impressive kit, size and contents are amazing. And your skill complement the kit. Late but I will follow along on this build in the back row. Regards Antony.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...