Jump to content
MORE HANDBOOKS ARE ON THEIR WAY! We will let you know when they get here. ×
Model Machines LLC – Byrnes Model Machines - machines to be back in production soon. ×

GrandpaPhil

NRG Member
 View Profile  See their activity

  • Posts

    5,885

  • Joined

  • Last visited

 Content Type 

Everything posted by GrandpaPhil

  1. GrandpaPhil
    Nice job on the planking! It’s looking good!
  2. GrandpaPhil
    Welcome!
  3. GrandpaPhil
    Nice work!
  4. GrandpaPhil
    Awesome work!
  5. GrandpaPhil
    16” guns at point blank range! 😃
  6. GrandpaPhil
    As stated before, I am using Zu Monfeld’s method of building ship’s boats. I have made the molds and the templates of the gunwales. Next I need to make some frames and then the keels/rudders, before I plank the boats with 3mm (1/8”) wide strips of card.
  7. GrandpaPhil
    I cut out and fitted my pin rails. I double layered them, since they are card, and set them aside to dry.
  8. GrandpaPhil
    Test fitting my boat davits:
  9. GrandpaPhil
    Nicely done!
  10. GrandpaPhil
    It’s been a very educational evening. I learned how to make a hull using the bread and butter technique. I layered the hulls (the male molds anyways) for three ship’s boats. I carved them to their final shapes before sanding them smooth and labeling them to put in my bits bins for later reuse, after I am done with them. I am confident that I could scratch build a ship’s hull with the bread and butter method. I took pictures of the hull blanks in the positions of the ship’s boats, which I will begin tomorrow. They will be made IAW Zu Monfeld (just out of card). The stern boat will hang by davits, which I will also begin tomorrow.
  11. GrandpaPhil
    Anchors are rigged and finished: On to the boats. I’m going to make male molds for the 3 different types of boats that the Prince de Neufchatel carried, and build the boat’s frames, keel and planking upside down. The molds will be made bread and butter fashion. I’m using the AOTS for the Victory, due to the time period and similarity between American and British Naval equipment, as my source.
  12. GrandpaPhil
    The anchors are installed. I need to finish rigging them. I already made the blocks for them.
  13. GrandpaPhil
    All guns are rigged: Anchors are ready to install.
  14. GrandpaPhil
    Thank you, Mark!
  15. GrandpaPhil
    Long guns rigged: The rigging is simplified due to scale and room.
  16. GrandpaPhil
    Breeching ropes installed:
  17. GrandpaPhil
    Have at it! I’m looking forward to the build log!
  18. GrandpaPhil
    My next iteration of rigging blocks (for the anchors): I was inspired to reshape them after seeing the work of others on this site.
  19. GrandpaPhil
    Anchors:
  20. GrandpaPhil
    The Prince de Neufchatel now has teeth. The guns are glued in place. I also made the anchors (final painting is pending). These are my second set due to those scaling issues that I mentioned earlier. I had to reduce them in size to fit properly. I am going to install the anchors and have a gun rigging party. Due to some more scaling issues, rigging blocks are not going to fit, but I can still put the rigging in place, oh well.
  21. GrandpaPhil
    I have discovered some more scaling issues, which considering that I built from multiple sources, in hindsight, is to be expected. Oh well. Pressing on.
  22. GrandpaPhil
    I made the iron strapping for my cannons. I have also traced out the parts for the anchors.
  23. GrandpaPhil
    Thank you, Mark! Much appreciated!
  24. GrandpaPhil
    My test fit:
  25. GrandpaPhil
    18 mostly done cannon and carronades. They just need the iron strapping over the pivot point, dry brushed to make them look like iron and then sealed prior to installation.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...