Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

Rustyj

NRG Member
 View Profile  See their activity

  • Posts

    2,516

  • Joined

  • Last visited

 Content Type 

Everything posted by Rustyj

  1. Rustyj
    Thanks Ben but I can tell you cutting them into cherry is much easier than boxwood. I don't envy you all of the ones you're going to have to do. Hi Pete I wouldn't want to deprive you of all that fun. Thanks Grant.
  2. Rustyj
    I’ve installed the gun deck clamps now and have started on the beams. Here you see the plans of what the gun deck will hopefully look like once completed. Here you see the beams set temporarily in place and marked out for the placement of various carlings, beams and half beams. Here is a beam the goes between two deck beam, # 3 & 5 as well as the half beam. And here it is set in place. I will just work my way from one end to the other filling in the carlings, ledges and knees as I go.
  3. Rustyj
    Stunning! Well done Remco.
  4. Rustyj
    Hi Glenn, Well done on the planking and painting. If you hadn't told me the paint scheme was different I wouldn't have known. Everything looks really nice and I enjoy your descriptions. Thanks.
  5. Rustyj
    Hi Andy. That's a duh moment for me. I didn't give recoil a thought. Thanks.
  6. Rustyj
    Hi jzwei, Welcome to the Triton group and Happy Birthday too!
  7. Rustyj
    Okay now I can make some pins! Thanks
  8. Rustyj
    I’ve completed the second layer of decking for the mortar pit. I assembled it off the model again gluing black construction paper between the planks to simulate the caulking. The planks are a different width and did end up over lapping the lower decking most of the time. One seam lined up on each side so there shouldn’t be a concern with strength is it was that way in full scale. After I did the initial assembly I then marked the circle for the mortar and cut close to the line with the scroll saw. I then used the dremel with a sanding drum to finish it. I then glued the second decking to the first. I also have drilled it for the treenails After looking at the plans I noticed that between the top beams for the shot room, the deck beam, and the two layers of decking it would have been 3’ 4” thick on the actual ship! That’s a lot of support for what I assume to be a very heavy gun.
  9. Rustyj
    Hi Ben, I’m glad to see that you have finished her.Very nicely done and it looks really great in the display case. Another point about switching back and forth between the “dark side” and the light is you could become deficient in Vitamin D if you stayed on the dark side too long!
  10. Rustyj
    Oh my Augie. I just got caught up from what I missed while I was away and I LMAO while reading it all. Oh and by the way the planking looks really good too!
  11. Rustyj
    Well I’m back safe and sound and hope to relax a little doing some modeling this weekend. Thanks Paddy. Ben, Not as much as I missed MSW! Hi Grant and thanks. Thank you Craig, Hi Chuck. Thanks and it’s good to hear from you. Jeff, yes she is huge but I’m getting used to it now. There has been so much going on here at MSW over the last 8 days! I need to take a week off just to read all the posts. I’ll do my best the work shop is calling right now. Thanks again you all and it’s great to be back!!!!!!!!
  12. Rustyj
    Hi Bob. I’m back in town and I just got caught up on your work. Everything looks to be going very well. You may have had doubts but the rest of us knew you would “nail it”. Oh by the way, isn't having a couple of teeth extracted, a little extreme way to get more modeling time? I hope you're feeling better.
  13. Rustyj
    Hi Pete, Glad to hear you are enjoying it. Hi Bob, I wondered the same thing about the upper and lower planking but they are different widths so the majority of the planks overlap. It looks like that all but one plank on each side will be an overlap. Once I cut the planks and add the construction paper I’ll know for sure. As far as assembly of the second planking I will do it off model. I plan on using lengths just long enough to get into the circle and then cut it close with the scroll saw and finish with a drum sander. Again that’s the “plan”. As far as mouse world goes thanks for the hint. We always try to avoid the weekends whenever possible. Especially this being a holiday weekend. Well the Admiral is waiting so it’s Hi Ho Hi Ho and out the door I must go.
  14. Rustyj
    Thanks Michael and welcome aboard. I’ve cut and fit the mortar pit boundary timbers. Between these two timbers will be a first row of decking. It is cut from boxwood and the calking is simulated using black construction paper. Doing the pencil on the edges just looked too thin at this scale. Here I’ve cut out the plans showing the second layer of planking that will go right over the top of the first. You will notice that a nice circle is formed in the middle for the mortar. Seeing I don’t have a drill bit that big it should be interesting getting the hole round. Well this will be the last post for awhile. We are off to the land of oranges, alligators and a talking mouse with the grand kids. Should be interesting to see how steady my hand is when we get back. You all be good now while I’m away! No slacking off or rum rations will be cut!
  15. Rustyj
    Hey Chris I hope you gave a great Birthday!
  16. Rustyj
    Oh my thank you all. You are too kind.
  17. Rustyj
    Seeing some more of your fine work is a great way to start my day! Thanks.
  18. Rustyj
    I’ve assembled the two other rows for the shell room, glued the cannonballs in place and set all three rows in place. I then added the top beams just like the bottom beams. Here you see the plans for the mortar pit beams and planking as well as the beams cut out as per the plans. The mortar pit beams have been cut and test fit into place on top of the shell room. The bottom of each beam is notched to fit over the top beams of the room. Here you see the notches cut into the tops of the mortar pit beam and ready to accept the mortar pit boundary timber. Thanks for stopping by!
  19. Rustyj
    Thanks Joe, I'll keep the picture coming, that is when I remember to take them! Hi Grant, I am too brief sometimes. Sorry about that. I took a 3/8" (9.5mm) drill and used it to make a small depression in the center of the shelf. I then used 100 grit sandpaper on the tip of my finger and just kept turning it in the depression until I had it the way I wanted it. I then finished it with some 220 to smooth it out. Kinda like sticking you finger in your ear and twisting back and forth when it itches!
  20. Rustyj
    Thanks Chris, It's great to hear from you. The cutting out of the parts and the assembling of the shell room is progressing. The shelves are made from cherry and the posts from poplar. Each shelf will have a depression sanded into it for the mortar shell to set in. Here you can see one row set in place for a test fit.
  21. Rustyj
    Thanks Bob and Joe, It's sure different than anything else I've done and a nice change. It will be interesting to weight it when I'm all done as its getting heavy already.
  22. Rustyj
    Now that the floor riders are in I’ve started the floor for the shell room. All of the beams are cut from some white poplar I had kicking around. The beams and posts will be sealed with a natural stain prior to the application of wipe on poly. Here are the shell room floor beams test fit. And the completed floor with the beams and walkways which are made with boxwood.
  23. Rustyj
    Ouch, That really sucks. Well I guess you have something to look forward to doing during your visits.
  24. Rustyj
    Hi Augie, You’re moving along nicely. The planking of most of the hull is straight forward. Just remember to pre bend the planks at the bow and stern like Chuck describes and you won’t have any problems. Might take a looooong time but no problems. Adrieke, The practicum it around 170 pages.
  25. Rustyj
    The inboard hull planking below the motor deck clap has been installed. I still have to drill it for the treenails and then it’s on to building the home for the cannon balls. Here are the plans showing the assembly and it’s placement.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...