Jump to content

Mike Y

Members
 View Profile  See their activity

  • Posts

    1,498

  • Joined

  • Last visited

 Content Type 

Everything posted by Mike Y

  1. Mike Y
    Piet, I was missing that impressive log for some reason.. A week ago I found it! Very impressive atmosphere here, and excelent historical / family details. Thank you, enjoyed reading it. It is like a good book! Best wishes with the continuation of the build!
  2. Mike Y
    Remco, your bet is spot on - after I tried Castello on my previous build (see longboat) - can't use any inferior wood anymore P.S.: next update would be in a few weeks, started a batch of 10 frames
  3. Mike Y
    John, as far as I know, Hahn did have any rigging plans for Oliver Cromwell. So you will need to do some research, like finding a similar frigate with rigging plans (for example, Pandora is quite close, and there is Anatomy Of The Ship book for it). There is a very little documentation about Oliver Cromwell, so I doubt you can find a precise rigging plans...
  4. Mike Y
    Tried Arkowood (https://www.arkowood-lossburg.de/). Was looking for a high quality wood supplier in EU, who have at least pear, Castello boxwood and ebony. Looks like I found it! Wood quality: Colour variation - very small, wood is finely selected. Thickness deviation: not more then 0.05mm! Finish: very smooth finish, feels like sanded with 300-400 grit. Other: Custom size milling: no problem with that, if you do not see the right size in their catalogue - just mail what sizes do you need. The price level for custom milled wood looks the same as for the standard cuts they have in catalogue Communication: excellent, I received a reply to my mails in a few hours! Wood cost - looks ok. Hard to compare, but looks on the same level as in US suppliers. However, you save some money on not paying VAT, customs, postage fees and extra shipping, that you are usually paying if ordering from US Payment methods: paypal is accepted. Delivery cost: quite moderate, regular postage price from Germany to other EU country. No feeling like you are getting overcharged for delivery. Processing time: they promised 1-2 weeks, I got the wood in 2 weeks. So quite fast, with correct estimations Packing quality: ok, no damages The photo of what I received. Left - swiss pear (steamed pear), center - castello boxwood, right - ebony:
  5. Mike Y
    Hooray! Received my new wood for frames. The colour variation is much smaller. Arkowood one is creamy and pink. Same colour as on Lumberyard laser cut parts, where the "prime grade" pear is used. Maximum thickness deviation is around 0.05mm (0.002 inches). My micrometer have a 0.05mm precision, so it is basically as correct as I can measure.. Number of planks with defects (grey spots, etc) - 5 planks out of 60 (just 8%), which is quite ok Wood is already sanded with a fine grit Small wood deviation together with fine finish means a lot of time saved on sanding the frame to the uniform thickness and smooth surface. Planks are perfectly straight and not curved - saves some efforts when trying to cut the frame blanks on a proper angles. But better look on pictures. Both woods are called the same, it is swiss pear aka steamed pear. Box on top - Lumberyard, box in the bottom - Arkowood. Left - Arkowood, right - Lumberyard. Notice the finish difference, Lumberyard wood is very rough, looks like sanded with 60 or 80 grit. Arkowood looks like sanded with 300-400 grit, or maybe even higher. It is very smooth! Also ordered some sheets, just to try. Left - pear, center - Castello boxwood, right - ebony Ok, now I am finally happy with the wood I have, time to redo 9 frames that I already assembled
  6. Mike Y
    Great carving! And an interesting wood color, soft and creamy. Can you tell more about other projects that you have? Looks like you are making three fully framed models in parallel! Wow!
  7. Mike Y
    Looks like I am becoming a hand tools fetishist.. There is something nice about working with a high quality chisels and knifes - no noise, no sawdust, and you feel like making a pinocchio Especially surprised with the knife - it is the sharpest knife I ever held, it make a clean cut without any pressure, and it is heavy and sharp enough to ignore the grain direction! But it reminds that as with any hand tool - you need to practice and learn a lot to use it nicely... The shape of a rabbet was asymmetrical to meet the planks on a proper angle: Result is not perfect, there are a few ooopsies, luckily most of them are on the inner side, which would be invisible. I will not cut a rabbet on a side that would be fully opened. Not able to cut it smooth enough to make it fully exposed.
  8. Mike Y
    Discovered an amazing tool shop that also sells a high quality Swiss made chisels (Followers from Stockholm - it worth to visit Slöjdetaljer, but you probably already know about that place) Got two tiny chisels - one V shaped, one U shaped, and a carving knife. Pricey, but a good quality. Now practicing a lot to be able to hand-cut a smooth curved rabbet, and maybe even draught marks
  9. Mike Y
    Nenseth, if they are shipped from Russia - 2 weeks is ok, it might take more. Russian post is mega slow, we are talking about weeks and weeks.
  10. Mike Y
    Thanks for the info. It is just a bit, hmm, strange to have a model recently built, but with no pictures on the internet! Planning to have TFFM and the Comet book as a Christmas present for myself.
  11. Mike Y
    Does anybody know where to buy Holly in EU/UK? Or it might be sold under different name? It is also hard to google it, because all search engines are sure that I just did a typo in a word "Hollywood". Facepalm!
  12. Mike Y
    Pardon for a silly question, but where can I find more photos of that beautiful model? There is one tiny pic on a page with book description, but I can't google anything extra.
  13. Mike Y
    Hah, there is actually an IKEA assembly guide for the Viking ship:
  14. Mike Y
    Alan, with your level of planning, I am sure you will end up with an ultra detailed IKEA-style assembly sequence before the construction actually started Thanks for encouragement. I think I will just use brute force - no jigs, just a very slow and gentle carving. No coffee, no beer, steady hand and a lot of practice before. Hate that things, it is no longer a technological process, but more of an art.. You do not need an art if the process is good!
  15. Mike Y
    Mark, you are totally right - rabbet follows the shape of the keel, I should have carved it before gluing the stem. You see on a photo that rabbet pencil marks are parallel to the glue line bonding keel and stem. But now it is too late, I did a classic mistake of gluing parts too early Will try to make it with a template.
  16. Mike Y
    You will sand it anyway, which will also remove the glue stains. Also, try applyin less glue, and remove excess with some stick as fast as possible. What glue are you using? Realy recommend to try an orange Cascol for indoor use, it should be available in all Nordics. Bonds pretty fast, very strong. Do not leave colored stains, could be easily dissolved with water if needed. It is just perfect
  17. Mike Y
    Finally got in the right mood to make a rabbet. Was pretty scared, one mistake - and need to replace a section of a keel (which would be a good reason to add some joints though However, so far it works out pretty well. Started with a slow and gentle cutting of a straight line, using inner line of a keel as a base: That give a straight and parallel lines. Another proof that good jig means a lot. Then cutting away a strip in between, and smoothening it with a triangle-shaped file: Decided not to make a big fat rabbet, will either widen it later, or shape the edge of a gardboard plank, so it will tightly fit into the rabbet. It is anyway better than an ugly gap between gardboard and keel, if rabbet is too wide. Position against the frames is ok, just a minor adjustments required for some frames: But that was all games, now need to continue the rabbet on the stem: How to make a nice curve - no idea. Can't come up with any jig idea, because there is no base line to attach to. There is no chisel to make such curve. Trying to scratch it by hand will fail due to a wood grain. Thinking of making an acrylic template, and scratching the line using that template. Or there are some better tricks? Would appreciate your advices!
  18. Mike Y
    That would be fun! Nice woods!
  19. Mike Y
    Installed 7 frames around midship to see how the all look together. Now it is starting to look ship-alike! Very curious how the edge of a frame will look like when faired and sanded... A shot inside the hull promises that there would be a lot of fairing to make it smooth
  20. Mike Y
    That's a lot of fairing and sanding! Good start!
  21. Mike Y
    There are a number of topics about that - no consensus, people use different glues. I use paper stick glue, then scrape away the paper. A bit of sanding is needed anyway, and it removes all traces of a glue completely.
  22. Mike Y
    Making around 5 frames in two weeks, can't spend more then 20-30min every evening But it is a pretty good relaxation. However, the result is frustrating. Yep, the wood colour difference again. It looks like a frame built with three different kinds of wood, where only one of them is pear, and others are only technically pear, not something you consider as pear for a modelling. Got really tired of that. But then I found a promising build log - La Belle by Hans Christian, where pear looks like pear! And colour is not varying, and finish is already nice. Thanks Hans for providing a better photos His wood is from ArkoWood - www.arkowood-shop.de Ordered new frame blanks there, all 60 meters of a cute pear. They do custom milling, and the order processing time is just 1-2 weeks. The price is ok, just 150 EUR / 190 USD, plus cheap shipping, plus no import taxes or customs (because it is inside EU). Will report when I will receive it, looking forward. It would be great to have a high quality supplier nearby, at least 4 out of 5 stars on a HobbyMill grade Truly hope it is my last whining about the wood quality.
  23. Mike Y
    Proxxon is probably the only option for a livingroom modellers, where the bandsaw is fitted to the table and stored in the shelf later on... Other saws are larger. I have proxxon one, it is really good, precise and easy to setup. But a bit louder then I expected - the plastic case acts like a resonator. See http://modelshipworld.com/index.php/topic/5807-proxxon-micro-mbs-240e-band-saw-review/for details. Lack of a fence is disappointing though..
  24. Mike Y
    Markus, followed your advice. Thanks! Before: After: It is 2-3 layers of a thick corrugated fibreboard, glued with a thick double sided sticky tape. Plus some foam-style packaging material between the case and wheel mounts. It does make a difference. It is not dramatically silent, but definitely less noisy then before. The method is very cheap and has no drawbacks, so why not To make it really silent I am probably need to make it from a massive wood piece. But that is an overkill. At least now I can use the bandsaw without worrying about my neighbours
  25. Mike Y
    I wonder how they patched that holes while being in the sea.. How the ship looked like after a first battle. And here is a good slo-mo of the hull damage:

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...