popeye the sailor

it's the sad truth George.......I think it probably wouldn't have mattered what lighting I went with, light is light........plastic density would rule here. so I put all that stuff back in the Holiday Harbor box, and I'll continue my thoughts with that build. as I move back towards the stern, I remembered to drill out those holes as well, on the stern section. I'm sure those are off as well. I'm not liking the idea of cementing in individual rigging lines aft........but I believe I have a game plan for tying them.....might lessen the ganglia effect. the bow is almost complete

the bridge structure fascia.......what a starting point this actually turned out to be easier than I thought. the first thing I did.......I did this right after posting the last update.......was to add to the ends of the part. I will need three sets of stairs for this area.......the hand rails was done to look like wood. the part then got about 1/8 cut off of the top.......I dunno....some weird number the slot was trimmed out for the stairs. ...and then the stairs were cemented in place. the long section of railing was easy......I didn't need to trim much. but, for the small section for the port side. I had to add a piece to it. in place......not to bad I think now I need to do the same to the fore castle deck. it requires two sets of stairs.....all that needs to be added now is the railings I added some of the rigging to stern area.......I can't be as cleaver as I was with the bow. I'll figure something out though.

thanks Lawrence. > goosebumps< ohhhh.......if I had the billing's kit........now there's a pipe dream the two big things would be the lighting and rigging. I've dumped the lighting idea........after seeing all the white walls lit up by the bulbs, it turned me off. density of material would be the cause here...that, and if it were black plastic......twould be a fool's errand to go off now and paint all the inner walls black......pretty much what I would need to do to cure that. I don't feel bad gents........I'm good with it given the diagrams and stuff that I've found, I'd be tempted to do one in wood. besides.......I have a bigger plan in mind

agreed! your doing a super job!

a very good point KP..........I can see I'll need to press the hull and sections together to eliminate any gaps. to do it now would give the results you describe. the bow was one thing..........the stern I can see, will be quite another. I will keep an eye on that....thanks for the head's up

thanks Mark and George........I'm half way there now. I have some really nice parts to work with I've heard of it Jack.......I use the Testor's in a tube {white putty}. used it for many years. I tend to rely on adding styrene to parts though......it can be fashioned off the model and fitted.

awesome piece of furniture Patrick.......very nicely done! A+

thanks Kees.........got her in the living room. looks good along with my other builds

thanks John........yea, they're small. the best thing is that they have a quick fix thanks for the like Augie

looking great Mark! your sorting her out in fine style!

I also want to express my thanks and sympathies to all you folks who have furry friends that react to noise. Gibbs doesn't have a problem with thunder...I'm surprised....I've felt the noise percussion from some of the louder ones. let one firecracker go off though, and he's diving for the nearest hiding place. we hate it....there's nothing we can do. tried to play the TV a bit louder that usual, but someone just up the street, decided to touch off one of those mortar displays....and off he went.........under our bed. man.........was it loud too! I took a nap today......Gibbs got me up at 3AM to go out.......he won't go out after dusk. once the noise starts, all bets are off that he will go out. there was a little earlier this evening, but it's been quiet since......he is still unsure. it will get better when things quiet down Anyway........there were two other lines to add on {port and starboard}, and one to add to the lower fore stay {very slight tension on it}. these were tied on, weighted and cemented. hee.......hee.........thought I'd put that one in there there's nothing wrong with your computers.......do not adjust the horizontal...........do not adjust the vertical........I am in complete control of your screens.......I will do it. that's better. there is one more back stay that originates from the foremost boat deck roof, that will terminate at the upper mast. the decks sit pretty good.........but there is a problem. I had this all set up, but with the may-lay in gluing the mid section together, it fell short a tiny bit..you might see it here. there is a better view here. the locator pins do not sit in their holes correctly......too late to try and fix it now. I will have to deal with it.....but I'm seeing some form of a silver lining here. it lies in that part I showed earlier.......don't know what the thinking was with it. as for the alignment problem here......my first thought was to cut off the locator pins.......not a good idea. if there is a warpage issue, as with the aft section of the hull, this would make it worse. the correct thing here is to drill the holes a bit larger, which I did. this area of the bow section would be considered a well deck....this part would be the fascia for the bridge deck. here it is in place.........you can see how 'out of sorts' it looks. an over view shows how much aft, the bridge deck is. along the bulwarks there are gaps..........perhaps I can add a little material to fill them in. what I plan to do here, is trim down the part, even with the deck line. as I had mentioned, there are the two 'D' sprues, meaning that I will have quite a few extra railing parts. I will eliminate the over bite and replace it with railing. there is a stairway that is to go here as well......it should mate quite well. the instruction diagram shows the stairway cemented in a cut out in this fascia part........non existent on the part I see here. you can see it......it looks like a sort of grating in the wall. this needs to be cut out.......but since I'm trimming it, I 'll do it a bit differently. I still needed to cement the boat deck fascia to the upper deck sides {bulwarks}. I did it at this time. as mentioned, I may not be so lucky with the stern section.......I may have to cement these two sections together. I will have to see

that would be funny Greg......the interior of the hull would look like a telephone switchboard I did the Star trek Enterprise when I was younger, with the lighting.......wasn't impressed either. *just heard a few booms.........Gibbs is under my desk now* wood is so much better with lighting.......light doesn't filter through the walls, as well as the windows. it's sad that a lot of the upper parts is done in white plastic........and painted flat white to boot...... I'm beginning to hear that discouraging word, I've heard tell about. I'll try and do a night time picture - dry fit. thanks for the good words my friends.......I'm still enjoying the holiday {and my vacation}, in spite of the small inconveniences. I'm convinced that they really goofed legalizing fireworks........there are so many folks out there that don't know how to properly use explosives case in point........the Darwin award goes to the young man in Maine.........whose drunk'in stupidity, made him believe it was a good idea to light a mortar shell on the top of his head. as Daffy duck said............"I can only do it once!" I can't take full credit for the section assembly.....I'm just doing it differently, than the kit says to. the main reason is the rigging.........if I did it the way the kit say to, there would be huge thread balls on the masts, where I've tied them all the bow was easy, once I figured that more than one group of lines could be added by tying a single knot. the best way to describe this.......2 for the port, 2 for the starboard.......run them {of equal proportions} through a fore mast thread loop, knot and cement in place, capturing the two sets of lines with one thread. if your using Ca though........get the tension on them before gluing them. lines that don't run true from an attachment point, just doesn't look good these masts are so thin........I wish I could have drilled holes to run the thread through.....wood has made this so much easier. the stern isn't going to be as easy........the mizzen mast is located at the aft section of the A deck........the mast runs through an aft roof and cements in the A deck floor. there are lines that initiate from the stern section, terminating at the mast. I fear that the stern section will need to be cemented to the mid section, prior to rigging. this could possibly set the stage for an alignment nightmare, since in the turmoil of cementing the mid section together, it ended up being about 1 mm off, aftwards....{could be just a 64ths.......I might be melodramatic here} I have another point of concern, that I will show you....I have to import the pictures to my computer.........a few moments and I will return I use Testor's , Model Master, and Billing's, Mr. Coleman .........gloss....but primarily flat enamels

awwww........just say it Larry........you did it for a reason..... most folks will be so taken by the overall appearance, that they will forget that they left their microscope at home. but.......if there are some to be vacant and you plan to show it, perhaps a little tweaking might be in order.

the place is hopping here........although I'm not spending it where I would like to. compound that with a dog that is deathly afraid of loud booms, and you get a very short attention span. I've kept him close these last couple of days.....last night I was up well after 2 AM. anyway.......to recap what I've been up to I put a few lights in the hull to see how it would look. too bad it was daytime......it might have looked better. I only have two lights in the hull..........as many as five may be needed. touch ups were done to the mid ship section. the fore stays and the three main back stays will be the larger size thread. I opted to use the kit supplied ratlines. they cleaned up well and I refined the contours, getting rid of any mold marks that might be on them. this part is the front fascia for the bridge deck.......it is sooooooo incorrect. the slant of the outer edges are wrong, it appears to be too tall, and there is no slot cut out for the stairs. I may have to cement the bow section to the mid section, in order to straighten it out. more stays were added to the bow section......all the lower ones will be the smaller thread. there are quite a few of these lines, but it will need them all for support, when the communication lines are installed. they will span from the fore mast, all the way back to the mizzen mast. using clothes pins for weights, they will be hung off the sides and cemented on the underside of the deck. almost all of the lines are done on the bow section..........one more pair and the back stay terminating on the boat deck, from the forward structure roof, are all that's left to do. there are still a few more parts that need to be added to the bow section. more to come.......

the stern ratlines Sam........the starboard side looks like it's too long and bulging out from the model. actually, the kit supplied ratlines don't look too bad..I've only done the bow section at this time. I haven't really looked at it yet, but cementing the stern section to the mid section, may be a tool I can use to cure the slight warpage in the hull.......jury's still out on that one. sorry for the lack of pictures........I've had to babysit a very scared dog these last couple of days. I'll get right on it!

you are among a cavalcade of first timers Larry.........I raise my hand as well playing so long with plastic and fishing boats, really hasn't given me too many opportunities to try them either. mass assembly isn't fun either looks like your well on your way. nice tools BTW............wish I had that chopper when I was planking those three hulls.......

thanks all for the kind words and likes. I got a chance to do a little on her yesterday. I wish it were Nigel.......the TRMA has some wonderful rigging diagrams. I'd love to use them, but it just wouldn't look right. I haven't seen that one Larry......kind of reminds me of that Bugs Bunny cartoon where Daffy Duck does his "exploding duck trick". bugs is clapping saying "wow Daffy, that was some neat trick!" ....and there's Daffy, floating to heaven, saying "yea.........but I can only do it once!" done some rigging to the bow section.......mast is up. I'm using two sizes of thread......the difference in size looks pretty good to me. however, I did settle on the kit supplied ratlines......close compatibility on the preformed, but no cigar.

thanks George

thanks all for the kind comments and the likes. it wasn't that bad Greg......but enough to warrant an apology. usually I'm the one whose bummed and she's the one giving me the pep talk we're good took the clamps off it after I mowed the lawns..........I can pull it off now without any more horseplay......I glued the underside and touched up the glue marks on the surface. I need to be careful with it now.......cripes, I'm knock'in off the vents and stuff. this is the reason why I made the change in assembly. I didn't want to have too many small parts on there that can get knocked off. I can't wait to see how the other two decks {assembled} go on there. I did do a dry fit with the A deck.......it fits pretty snug. hope to have an update soon

some really nice progress Den.........I agree on the planking.....contrast makes the eyes grow fonder

looks great Bob..........I like basswood as well. I've seen hulls done in mahogany, and they look nice as well. I used to order my wood from the Billing's outlet / warehouse in Wisconsin {Tom} , but I haven't ordered any since they closed. what I was using was a wood called Obechi. I've been getting stuff from Hobby Lobby

come on!!! you mean to say that you don't compear your model to a banana???? it has appeal {find the hidden fruit}

mine's a hand held one.........I lock the button and set it upside down in a milk crate. one of these days, I might get an orbital sander...a bit smaller and more compact again.......your hull looks awesome!

she looks super Sherry........love the way you made the lanterns really dresses her up!

it's been a week or so since my last update. along with the chores I've had to do around the house, the admiral and I have been battling this nasty summer cold. 'ole Suzanna was right! we've been miserable! it's now settled in my chest, to make life even more so. but I have been too lax with the Titanic....as well as skeptical with the instructions. I decided to go my own way.......if the need arises to modify......so be it I'm still in a quandary over the ratlines........using the preformed ones instead of the plastic ones. while I was in my thoughtful spot, I looked at the photo of the Mini Craft proto type model....and it made me stare........ not too keen on having this on my build........note the rigging as well. this is where I tend to think that there should be different size rigging thread. it would be hard to come up with blocks for the rigging diagrams I have though......too bad this isn't at 1:96 scale........I do have some from the C.S.S. Alabama, the Cutty Sark, and the first U.S.S. United States build. I've always loved this Revell series........in spite of the conjectures ans conceptions that surround them. anyway.....I still need to check this out. last week or so, I showed where I was, with the boat deck.......the aft structures need to be painted, the life boat cradles need to be done.......various touch ups.... the fascia wall that houses the fronts of all three decks, need to be widened at the base of the wall. one of the name flags was cut out of the parts sprue and slivered into tiny slices, which were cemented on both sides of the bridge deck portion of the wall front. when dry, it was trimmed and fitted to mate the adjoining wall structures better. here, the slot impression in the deck, shows where it is to be located. once fitted, it stands in place much better. now comes the part I've been dreading.........cementing all this together. the deck itself is so long and flimsy, it was really a feat to get everything lined up. imagine trying to do this with three decks cemented together. I even snapped at the admiral.......she saw my frustration and offered to help. I apologized profusely after the ordeal......it's never been my way to get that agitated. I was very glad to hear she didn't take it to heart. during the procedure, one of the walls came off. before the fascia was cemented in place, the wall was reinstalled. I made those simple clamps to keep the walls perpendicular while the assembly was drying. I did the same for the aft section, cementing on the top areas of the mating at the aft........it won't be so flimsy, when I do the underside {where I wanted the glue marks to be in the first place}. I have some damage control to do later. there was a slight adjustment of the clamp, but the front fascia was cemented in place at this time. I will also finish this up, when the glue has had time to set. yea..........like all night!!! this morning.......I took a look, but haven't touched it yet. when I do, it will be to pull it back off and cement the underside. the fore and aft sections of this part of the assembly, will need to be masted and rigged, before all three sections can be cemented permanently in place.