Jump to content
New Publication - Ship Modeler's Handbook - Temp out of stock ×

druxey

NRG Member
 View Profile  See their activity

  • Posts

    12,934

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    Nice work, Bob. Those wishbones are a little tricky to shape, no? BTW, i never keep my coffee or any other drink in the workshop area. All it takes is one spill....
  2. druxey
    That is an impressive result, Riotvan. Perhaps sanding sealer rubbed down (and automotive putty to correct any defects) might be a better approach than epoxy. In any case, several rounds will be needed to achieve the kind of finish that you eventually got.
  3. druxey
    It foreshadows Seppings' round stern by many years!
  4. druxey
    Those illustrated certainly seem to be Dutch style, not British.
  5. druxey
    Well, another lesson learned! We all seem to learn the hard way. I did, too!
  6. druxey
    According to Lees, catharpins of the style where a single block was lashed to each shroud with a zig-zag line laced back and forth, the ends seized together, were in use until about 1730. This applies to British ships. Not sure about Spanish, but most European rigging was similar. Anderson does not mention Spanish ships, unfortunately. He says there is very little information.
  7. druxey
    I agree; excellent friezework.
  8. druxey
    Good repair job, Bob. The hull looks great. I usually leave paint to cure and harden at least 24 hours before attempting to use masking tape over it. Preferably several days. Did you mask too soon, perhaps?
  9. druxey
    Late to the fray, another consideration: If a square tuck, the fashion piece needs to join the sternpost at about waterline level in order for the rudder to act effectively. Look at the Lely painting again: If that were a square tuck the lower end is well submerged and rudder action would be severely affected. That image, together with the Boston one, lead to the inevitable conclusion that she had a round tuck or just possibly a transitional one. It cannot have been a square one. I rest my case, gentlemen!
  10. druxey
    Well photographed and well described!
  11. druxey
    Sweet! I bet you are enjoying your airbrush as you obviously have the hang of it.
  12. druxey
    I'm enjoying watching your progress, Greg.
  13. druxey
    Welcome aboard, Steve. As Chuck mentions, you have many resources in your neighborhood!
  14. druxey
    Don't trust your eye for leveling frames! A heavy card construction will do for a jig.
  15. druxey
    The boats were built very close to where I live, Bob.
  16. druxey
    Looking very good indeed, Bob! Have you decided on a color scheme yet? The actual boats come in a variety of colors.
  17. druxey
    TFFM suggests 56 inches (about 140cm) of line for gammoning, not 30cm. And yes, "Do you dress to the left?" was a question tailors used to ask. I guess that I'm elderly, then.
  18. druxey
    Looking very nice so far!
  19. druxey
    Those front-hall photos make me cringe. Not because the models are not good - they are lovely - but where are their protective cases???? Even if the cat doesn't play with them, the dust that will accumulate on the rigging.... Oh deary me!
  20. druxey
    Welcome aboard. Your English is very good and those are very nice-looking models.
  21. druxey
    Just catching up with you, Mark. I didn't realise that you were having health problems and hope that the stent has done the trick. As for future projects, there's nothing wrong with 1:48 scale - or even larger. I've been working at that scale for decades. However, one has to allow for anno domini and, in my case, I don't think I'll be rigging any more models. The main thing is to enjoy model-making rather than get frustrated. All the best to you.
  22. druxey
    Who will notice a slight acanthus mismatch once the model and sea are complete? Nobody but you, Ron! My favorite cartoon attached without further comment....
  23. druxey
    We await with bated breath....
  24. druxey
    Congratulations: lovely work and display.
  25. druxey
    More toys!!!!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...