Jump to content

Recommended Posts

Posted

Hi to all!

So, one more of my projects here ...

But at first, we come back at some time ago. :)

 

Several years ago I built a boat in the 72-m-wide while staying on vacation. By the way, it is very convenient - you have the small kit, minimum of tools and you not lose your time on vacation. This boat was on the shelf of my bookcase since.

About a year ago I had got the empty bottle of Japanese whiskey with a fairly wide neck (25 mm). And this boat could be held a the throat of this bottle .

But nothing were occurred to anything but banal theme: rearmament boat spars, rigging and sails, and the replacing it all in a bottle. In general, anything interesting either in technical or in artistic terms

And I continued to explore possible options for upgrade the boat…

 

post-17539-0-17941200-1463053662.jpg

 

post-17539-0-20524000-1463053670.jpg

 

post-17539-0-66001300-1463053689.jpg

Posted

But recently I got the kit of the figures in the scale of 1/72 based on "Treasure Island" by R L Stevenson and the another kit with the set of boat's rowers ...

My thoughts began to move toward the crew manning the boat ... So, too, is nothing special ..

post-17539-0-33201200-1463053788_thumb.jpg

post-17539-0-98229400-1463053806.jpg

Posted

I was tormented by doubts for some time, but at some point I put the bottle, the boat and one of the figures and ... EUREKA !!! I saw a very old boat and the old Fisherman's ... My imagination added the fish, tied to the boat and a shark in the water close to the boat ...

 

post-17539-0-21126900-1463054282.jpg

 

post-17539-0-61694400-1463054317.jpg

 

post-17539-0-62057000-1463054324_thumb.jpg

 

Of course, this should be a scene from book "The Old Man and the Sea" by Ernest Hemingway and nothing else.

Posted

Next, I found a few photos marlin and mako sharks in the Internet, again have read "The Old Man and the Sea" to refresh in memory details and started this project.

The first step is the making blank for Fish and I began to remodel the existing figure of the captain Smollett in the old man.

 

post-17539-0-20732000-1463054829.jpg

 

post-17539-0-78249900-1463054835.jpg

 

post-17539-0-57484700-1463054875.jpg

Posted

Now I need to make the shark mako

 

post-17539-0-65200800-1463057413.jpg

 

post-17539-0-93810500-1463057422.jpg

 

post-17539-0-57119700-1463057430.jpg

 

It seems that this shark needs still in a couple of visits to the dentist :)

 

post-17539-0-90936500-1463057437.jpg

Posted

At this point, I decided to check the overall composition and arrangement of the elements of this story.

 

post-17539-0-47691700-1463057939.jpg

 

post-17539-0-99001300-1463057945.jpg

 

post-17539-0-84954600-1463057953.jpg

Posted

you do fish very well  :)    the figures look super..........I like where this is going  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

You are just unbelievable man! What a drama you are making !

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted
Posted

....and the shark smiled for the camera  ;)

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Thank you Denis, Nenad and Patrick!

 

Patrich, I'm sorry, but I did not make photos during the building of the boat. But this is a common boat from the kit.

Posted

I am not really like the way I have painted my fishes, but now I put them away and I started to improve the boat.

 

post-17539-0-01054400-1463061542.jpg

 

post-17539-0-59123900-1463061548.jpg

 

post-17539-0-30950400-1463061555.jpg

 

post-17539-0-56639500-1463061561.jpg

 

post-17539-0-69165100-1463061570.jpg

 

post-17539-0-76934500-1463061578.jpg

 

post-17539-0-11035900-1463061609.jpg

 

post-17539-0-59235600-1463061618.jpg

 

post-17539-0-99859700-1463061625.jpg

Posted (edited)

Igor,

the fish look frightening realistic, very nice work  :)

you`re surely bringing that theme to life........

 

Nils

Edited by Mirabell61

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Posted

Just fascinating.. and I too, like where this is going.  Very inspirational.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Many thanks Nils and Mark for your comments!

I do not know how will this project in its final form. New ideas and solutions come in the course of buiilding. :)

 

Next step - I did not like the details fixing the mast and decided to make they more similar to the real one.

 

post-17539-0-81455700-1463131534.jpg

 

post-17539-0-88841900-1463131551.jpg

 

post-17539-0-86804400-1463131560.jpg

 

post-17539-0-64365700-1463131570.jpg

 

post-17539-0-68189300-1463131577.jpg

 

post-17539-0-54521800-1463131609.jpg

 

post-17539-0-66261100-1463131617.jpg

 

post-17539-0-62184300-1463131626.jpg

 

I used brass 0.1 mm for the manufacture of new parts.

 

post-17539-0-30820100-1463131644.jpg

Posted (edited)
Posted (edited)

All of us on this forum make models. But our models do not tell a story, yours does. This is why this is art, and what the rest of us are doing are mere ... models. Very clever idea Igorsky! I have loved all your previous scratch builds, but a diorama ... in a bottle ... of one of my favourite Hemingway novels surely is the icing on the cake. This is imagination on something which is different to what most of us attempt, and I love it.

Edited by KeithW

Regards, Keith

 

gallery_1526_572_501.jpg 2007 (completed): HMS Bounty - Artesania Latina  gallery_1526_579_484.jpg 2013 (completed): Viking Ship Drakkar - Amati  post-1526-0-02110200-1403452426.jpg 2014 (completed): HMS Bounty Launch - Model Shipways

post-1526-0-63099100-1404175751.jpg Current: HMS Royal William - Euromodel

Posted

Two new parts - two variants of an anchor and a harpoon.

 

post-17539-0-06223500-1463134167.jpg

 

post-17539-0-60793700-1463134175.jpg

 

post-17539-0-33046100-1463134184.jpg

 

P.S. I made these details are not too good, so I'm going to make them again.

Posted

All of us on this forum make models. But our models do not tell a story, yours does. This is why this is art, and what the rest of us are doing are mere ... models. Very clever idea Igorsky! I have loved all your previous scratch builds, but a diorama ... in a bottle ... of one of my favourite Hemingway novels surely is the icing on the cake. This is imagination on something which is different to what most of us attempt, and I love it.

Oh, thank you KeithW!

I admire the skill of many of my friends on this forum and, of course, I continue to learn and with them too. The peculiarity of this project for me is that I do not have a precise plan of all process of the building. Many of the ideas come in the construction process. And now I do not know what wiil happen in the end :)

Posted

Big LIKE !!!

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...