ferarr Posted April 23, 2018 #1 Posted April 23, 2018 Hello everyone: I have finally started the "Dos Amigos". I'm using the plans included in the book "The history of American Sailing Ships, Chapelle." I have also found some documentation in the book "Global Schooner, Marquardz", and searching, the original plans of the "Fair Rosamund" in the museum of Greenwich (It is how they renamed the boat, once captured, and the plans of the house Assembly "Golden Kits" back in the 70s / 80s. The differences between the first three planes is minimal, I believe that produced by deformations in the copies. Of the rooms the biggest difference is that the length is 2/3 cm. minor, otherwise they are quite similar. The scale is 1:50. Well, I put some photos. A greeting (Hola a todos: Por fin he comenzado el "Dos Amigos". Estoy utilizando los planos incluidos en el libro "The history of American Sailing Ships, de Chapelle". También he encontrado algo de documentación en el libro "Global Schooner, de Marquardz", y rebuscando, los planos originales del "Fair Rosamund" en el museo de Greenwich (Es como renombraron al barco, una vez capturado, y los planos de la casa de montaje "Golden Kits" de allá por los años 70/80. Las diferencias entre los tres primeros planos es mínima, considero que producida por deformaciones en las copias. De los cuartos la mayor diferencia es que la eslora es 2/3 cm. menor, por lo demás son bastante similares. La escala es 1:50. Bueno, os pongo algunas fotos. Un saludo) prutser, mtaylor, hexnut and 9 others 12 Quote
aviaamator Posted April 23, 2018 #2 Posted April 23, 2018 Paper must be removed... mtaylor and BETAQDAVE 2 Quote
ferarr Posted April 24, 2018 Author #3 Posted April 24, 2018 Hello: The paper helps me to mark and delimit areas, then it will be eliminated in those areas where it affects me for the gluing of other pieces. A greeting (Hola: El papel me sirve para marcar y delimitar zonas, luego se eliminara en aquellas zonas donde me afecte para el encolado de otras piezas. Un saludo) BETAQDAVE, mtaylor and Mirabell61 3 Quote
Mirabell61 Posted April 24, 2018 #4 Posted April 24, 2018 Hello Ferarr, a very nice start with the bulkheads of that schooner, it looks very promissing....... Good luck with the build... Nils BETAQDAVE and mtaylor 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
ferarr Posted April 25, 2018 Author #5 Posted April 25, 2018 Hello: Fillings and carvings of stern and bow (unfinished) A greeting (Hola: Rellenos y tallados de popa y proa (sin terminar) Un saludo) Ondras71, aviaamator, hexnut and 5 others 8 Quote
ferarr Posted May 15, 2018 Author #6 Posted May 15, 2018 Hello: I have regularized the frames, and finished carving the stern. The stuck tag marks the top of the tape. Aa greeting (Hola: He regularizado las cuadernas, y terminado de tallar la popa. La traca pegada marca la parte superior de la cinta. Un saludo) dvm27, davyboy, hexnut and 8 others 11 Quote
ferarr Posted July 1, 2018 Author #7 Posted July 1, 2018 Hello: A partner convinced me to make the "top timbers" from the outside of the helmet, so I cut the frames, and proceed to mount them like that. A greeting. (Hola: Un compañero me convencio para realizar los "barraganetes" desde el exterior del casco, así que he cortado las cuadernas, y procederé a montarlos asi. Un saludo.) mtaylor, hexnut, GrandpaPhil and 3 others 6 Quote
ferarr Posted August 3, 2018 Author #8 Posted August 3, 2018 Hello : I have assembled a plywood to start working on the deck planking and for the execution of the gunwales. I have marked some lines of reference, and I have cut the stem, which is pending to thicken, but which I needed for the separation of the apostles, (Sorry, I do not translate it into English). I also put a plan of the planking of the cover. I had my doubts about the arrangement of the deck tables, but it seems that Chapelle draws them like that. Where I have doubts is in the width of the gunwale when it runs through the transom, I do not know if it should have the width of the rudder trunk, or not. a greeting (Hola a todos: Ya he montado un contrachapado para comenzar a trabajar en le tablazón de la cubierta y para la ejecución de los trancaniles. He marcado unas lineas de referencia, y he cortado la roda, que esta pendiente de regruesar, pero que necesitaba para la separación de los apóstoles. Os pongo también un plano de la tablazón de la cubierta. Tenia mis dudas respecto a la disposición de las tablas de cubierta, pero parece que Chapelle las dibuja así. Donde tengo dudas es en ancho del trancanil cuando discurre por el espejo de popa, no se si debe tener el ancho de la limera del timon, o no. Un saludo) kees de mol, aviaamator, GrandpaPhil and 6 others 9 Quote
Tigersteve Posted August 5, 2018 #9 Posted August 5, 2018 Very nice! Steve mtaylor 1 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
ferarr Posted August 20, 2018 Author #10 Posted August 20, 2018 (edited) Hello everyone. Already placed the gunwales. I should have done the firing of the poles, but I do not have the drill column at hand, so I have advanced part of the covering of the deck and the cutting of the deck boards. a greeting (Hola a todos. Colocado ya el trancanil. Debería haber realizado la fogonadura de los palos, pero no tengo a mano la columna de taladro, así que he adelantado parte del forrado de la cubierta y el corte de las tablas de la cubierta. Un saludo) (Hola a todos. Colocado ya el trancanil. Debería haber realizado la fogonadura de los palos, pero no tengo a mano la columna de taladro, así que he adelantado parte del forrado de la cubierta y el corte de las tablas de la cubierta. Un saludo) Edited October 14, 2018 by ferarr kees de mol, mtaylor, hexnut and 3 others 6 Quote
ferarr Posted October 14, 2018 Author #11 Posted October 14, 2018 Good morning to everybody. Taking advantage of these days I continued with the trancanil, slow work, but the truth is that when you see the result, it is worth the effort. a greeting Chuck, mtaylor, paulsutcliffe and 8 others 11 Quote
ferarr Posted February 16, 2019 Author #12 Posted February 16, 2019 Well, I've finished with the deck of the deck, I had to rebuild part of the gunwales by a small accident to scrape the deck, but the truth is that you do not notice the arrangement. A greeting (Bueno, ya he terminado con la tablazón de la cubierta, he tenido que reconstruir parte del trancanil por un pequeño accidente al raspar la cubierta, pero la verdad es que no se nota el arreglo. Un saludo) paulsutcliffe, GrandpaPhil, Rudolf and 8 others 11 Quote
ferarr Posted March 18, 2019 Author #13 Posted March 18, 2019 Hello, continue, slowly, with the deck. A greeting Tim Curtis, GrandpaPhil, Rudolf and 6 others 9 Quote
ferarr Posted May 26, 2019 Author #14 Posted May 26, 2019 Hello: A small step. I have cut the keel, the stern, the rudder and the stem. a greeting (Hola: Un pequeño paso. He cortado la quilla, el codaste, el timon y la roda. Un saludo) mtaylor, Rudolf, Siegfried and 7 others 10 Quote
ferarr Posted October 9, 2019 Author #15 Posted October 9, 2019 Hello everyone: I've had a few days, and I've continued with the model. I have made the grooves to place the "barraganetes", I have cut all the "barraganetes", I have built the covers of the "trancaniles", which I will then paste, and I will make the grooves for the "barraganetes" (more carefully, and more tightly, as it will be seen), And I built the "apostles." From here, I will place the keel and start with the helmet lining. Greetings. (Hola a todos: He tenido unos días, y he seguido con el modelo. He realizado las acanaladuras para colocar los "barraganetes", He cortado todos los "barraganetes", He construido las tapas de los "trancaniles", que luego pegare, y volveré a hacer las acanaladuras para los "barraganetes" (con mas cuidado, y mas ajustadas, ya que quedara visto), Y he construido los "apóstoles". A partir de aquí, ya colocare la quilla y empezare con el forro del casco. Un saludo) hexnut, KeithAug, Rudolf and 7 others 10 Quote
Mirabell61 Posted October 9, 2019 #16 Posted October 9, 2019 Lovely work Ferarr, Ilike the fishings on the deck, aft and stern Nils mtaylor and michael mott 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
ferarr Posted October 9, 2019 Author #17 Posted October 9, 2019 Hello: With the Google translator, I don't know very well what you mean, I guess you want to know this. I attached a drawing of a partner, Leopoldo. Greetings (Hola: Con el traductor de Google, no se muy bien a que te refieres, supongo que quieres saber esto. Te adjunto un dibujo de un compañero, Leopoldo. Un saludo) GrandpaPhil, coxswain and mtaylor 3 Quote
Tony Hunt Posted October 9, 2019 #18 Posted October 9, 2019 Beautiful work. And what a shapely hull form! mtaylor 1 Quote
Mirabell61 Posted October 10, 2019 #19 Posted October 10, 2019 23 hours ago, Mirabell61 said: Lovely work Ferarr, Ilike the fishings on the deck, aft and stern Nils Hi, I meant this picture of the deck.... Nils GrandpaPhil, Tigersteve and mtaylor 3 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
ferarr Posted November 13, 2019 Author #20 Posted November 13, 2019 Hello: Checking for possible defects, marking of the curves of the hull, and "lockout lock". Greetings (Hola: Comprobando posibles defectos, marcado de las curvas del casco, y traca de aparadura. Un saludo) coxswain, KeithAug, G.L. and 7 others 10 Quote
ferarr Posted January 19, 2020 Author #21 Posted January 19, 2020 Hello: Putting some "strakes". Greetings (Hola; poniendo algunas tracas. Un saludo) Jolley Roger, G.L., GrandpaPhil and 5 others 8 Quote
michael mott Posted January 21, 2020 #22 Posted January 21, 2020 Nice clean work, the hull has very graceful lines especially the sheer. michael mtaylor 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
ferarr Posted April 10, 2020 Author #23 Posted April 10, 2020 (edited) Hi everyone: Another small advance. I hope you all feel well. Take care of yourselves. a greeting (Hola a todos: Otro pequeño avance. Espero que todos os encontréis bien. Cuidaros. Un saludo) Edited April 10, 2020 by ferarr Siggi52, Geowolf, GrandpaPhil and 5 others 8 Quote
Bill Jackson Posted October 17, 2020 #24 Posted October 17, 2020 Sir, you are WAY out of my league!!! I am also building the Dos Amigos, but after seeing this posting, I feel like I want to throw mine away and just keep looking at what you have done. The Dos Amigos is my second model ship that I have built. I can see I have a long way to go, to do the quality work that you do. mtaylor and Siegfried 2 Quote
Bill Jackson Posted February 26, 2021 #25 Posted February 26, 2021 Did you build in a baracado on the deck? I believe this slave ship had one. mtaylor, Rudolf and coxswain 3 Quote
ferarr Posted February 27, 2021 Author #26 Posted February 27, 2021 Hello: At the moment I have it stopped. I had not thought about putting it, thanks for the comment. The slave ships that I know do not carry them, or do not represent them on the plans (L'Ouragan, Amistad), although I do know of their existence on other larger ships (L'Aurore). I see that you have finished your "Dos Amigos", put some more photos. A gretting. (Hola: De momento lo tengo parado. No había pensado en ponerlo, gracias por el comentario. Los bergantín goleta negreros que conozco, no los llevan, o no los representan en los planos (L'Ouragan, Amistad), aunque si conozco su existencia en otros barcos mayores (L'Aurore). Ya veo que has terminado tu "Dos Amigos", pon alguna fotos mas. Un saludo mtaylor and G.L. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.