Jump to content

Recommended Posts

Posted

So it appears that we probably won't be seeing a 1/32 Akron, Macon, or Los Angeles coming from your shipyard any time soon have you kept the Sparrowhawk out? We don't see too many 1930s Naval fighter builds. I agree the prewar colors are kind of neat. I have a 1/72 Sikorsky S-43 (JRS-1) that could be done in the same colors. Or as a Pan Clipper, or................?????:o

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted
Posted (edited)

I got an e-mail advertisement from one of the places I browse.........look in the model kits area.......I think it's the Macron,  but in the wrong scale

 

autoworldstore@dlisys.com

 

paste it in your browser ;) 

Edited by popeye the sailor

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

One of the hangars at Lakehurst was used to train the deck handlers for carrier ops. Back in the 50s, traveling down to the Jersey Shore, we'd see blimps floating in and out of the naval air station.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Posted
1 hour ago, Canute said:

One of the hangars at Lakehurst was used to train the deck handlers for carrier ops. Back in the 50s, traveling down to the Jersey Shore, we'd see blimps floating in and out of the naval air station.

That was in Hanger One...I think it was 3/4 scale, but large enough to fit real birds on it...crazy to see, there are probably some old yellow shirts out there that remember

Posted
11 hours ago, popeye the sailor said:

I got an e-mail advertisement from one of the places I browse.........look in the model kits area.......I think it's the Macron,  but in the wrong scale

 

autoworldstore@dlisys.com

 

paste it in your browser ;) 

I'd say...it's 1:520, still cool

Posted

I'd be delighted to wait  ;)   don't leave us in the dark!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Oh......Popeye the Punster Strikes Again.😂😂

Nice work J. the repair and everything look great.

Mark, those hangers are still there, every time we drive down to San Diego (a 4+ hour drive each way these days) I think about that story of the F4 pilots. Side note, apparently it is now a court marshal offense to fly under the Golden Gate Bridge.

 

Sam

Current Build Constructo Enterprise

Posted (edited)
3 hours ago, src said:

Oh......Popeye the Punster Strikes Again.😂😂

You got that right:stunned: Good old Denis can always be counted on:D

 

3 hours ago, src said:

Nice work J. the repair and everything look great.

Thanks much Sam  and thank to all for the like and comments, here at last are the final pics...

IMG_9810.JPG.43ed7cfd81f747d610a3fb79b554d84a.JPG

The nose doesn't line up as well as it did in post 45 nor is the paint as nice...the nose dives and subsequent repairs took their toll...

 IMG_9812.JPG.b6d7692fdea5e1d9438c3caec6463897.JPGIMG_9815.JPG.055b5d9ef73961a810d9be9744b5d8d1.JPGIMG_9816.JPG.4dd6e11f074bf3f2e2d2e304a5d43ba8.JPG

IMG_9818.JPG.378e08825ee46bdc7471d9f8fded4f26.JPGIMG_9817.JPG.c47d55b229d73ba5748bf7f0fda6909c.JPG

noticed the background was real dark, should have bounced a flash... so re-shot...

IMG_9823.JPG.e4c467514a2c3020c89a8df0f3a4f443.JPG

 

IMG_9828.JPG.928cc090980bf537b2eed4160ea31616.JPG

this may be my favorite view.  The bumper and taillights are scratch items...plastic tube cover in home-brew metal foil, tails are red sprue backed with the same foil...

IMG_9829.JPG.b5bdf8eeda4e9ea6547e6133842fd98b.JPG

a close secondIMG_9830.JPG.0e9d923940b736e02b6d45bf4620f1f8.JPG

debating adding the grill piece?

IMG_9831.JPG.6b5e418b96c8545ef9080ed66fc327ee.JPGsame foil on the windshield trimIMG_9832.JPG.df74669d273f5a337e81b24eac3da540.JPG

and the end

Thanks to all who followed along and participated in this log...not sure what's up next, I really should get back to the Hanna but the Sparrowhawk needs to see some bench time too...either way I'll post my decision and an appropriate link here. 

 

THANKS again, all you guys kicking in makes it fun

IMG_9820.JPG

Edited by jct
Posted

I'm with CDW.  She has the appearance and stance of one that's been down the track a few times which to me, doesn't detract at all.   Those rail frames were known to twist, usually the first full power run would do it.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Hi J

 

Another nice build. I have a question on the headlights though.

 

I am pretty much clueless when it comes to anything dragster beyond the fact that the driver hits the GO button and pretty much keeps it there until the car appears at the other end. Are the red headlights some requirement for the class, or just decoration? Either way they kind of add evil intent with the black paint job.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted

Hi Lou...working headlights were a requirement for gassers, but coloring them was not...that was just something a lot of teams did some would also tint the windscreens...glad you like the effect

Posted (edited)

she's done! :)   in spite of all the problems you had,  she looks great!  the reddish headlights.........you can call her The Werewolf;)   these bodies were perfect to base a gasser on........the pug rear quarters is the defining touch.   really nice looking car 👀 🏁

 

I've gotten two kits that sported the reddish tinted glass.......still got 'em in the spare parts box I started  :) 

Edited by popeye the sailor
extra text

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted
Posted

well.....it looks good,  no matter how you slice it ;) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...