michael mott Posted January 4, 2020 Share #121 Posted January 4, 2020 Just finished catching up Geert, Some lovely work it is inspiring me to get back to my Buzzards Bay sailboat, So many projects! so little time. Seeing the painted hull for some reason it shows off the form of the hull in a more soft way than seeing the planks, I like the colour as well. Michael mtaylor and FriedClams 2 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
Moab Posted January 4, 2020 Share #122 Posted January 4, 2020 I’m continually amazed at your craftsmanship. I’m also amazed with how much I’m learning. Photos are very clear and helpful...Moab FriedClams and mtaylor 2 Quote Completed Builds: Virginia Armed Sloop...Model Shipways Ranger...Corel Louise Steam Launch...Constructo Hansa Kogge...Dusek Yankee Hero...BlueJacket Spray...BlueJacket 26’ Long Boat...Model Shipways Under Construction: Emma C. Berry...Model Shipways Link to comment Share on other sites More sharing options...
vaddoc Posted January 4, 2020 Share #123 Posted January 4, 2020 Great progress GL, you tackled reasonably big projects like mast tapering, sheave and cleat making and mast hardware with ease. I am looking forward for the rest of the journey! Is your rope bought or homemade? Vaddoc FriedClams, mtaylor and Moab 3 Quote Current projects: 21' Fisherman's Launch - plans by Howard Chapelle Hercules Steam Tugboat - scratch build from half model lines Completed projects: 21' Yawl Longboat - plans from the National Maritime Museum Deben 5 tonner - a Whisstock yard design 24' exploration gaff rigged ketch - a Tad Roberts design 15' knockabout sailing boat Link to comment Share on other sites More sharing options...
Peter Cane Posted January 5, 2020 Share #124 Posted January 5, 2020 Wow!! Superbly executed! Moab, mtaylor and FriedClams 3 Quote Link to comment Share on other sites More sharing options...
G.L. Posted January 8, 2020 Author Share #125 Posted January 8, 2020 On 1/4/2020 at 4:42 PM, michael mott said: Just finished catching up Geert, Some lovely work it is inspiring me to get back to my Buzzards Bay sailboat, So many projects! so little time. Seeing the painted hull for some reason it shows off the form of the hull in a more soft way than seeing the planks, I like the colour as well. Michael I am glad that I inspire you to continue your Buzzards Bay sailboat, Michael. It is one of your projects that I follow with much interest. mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 8, 2020 Author Share #126 Posted January 8, 2020 On 1/4/2020 at 7:47 PM, Moab said: I’m continually amazed at your craftsmanship. I’m also amazed with how much I’m learning. Photos are very clear and helpful...Moab On 1/5/2020 at 6:38 AM, Peter Cane said: Wow!! Superbly executed! Thank you Moab and Pete mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 8, 2020 Author Share #127 Posted January 8, 2020 On 1/4/2020 at 10:28 PM, vaddoc said: Great progress GL, you tackled reasonably big projects like mast tapering, sheave and cleat making and mast hardware with ease. I am looking forward for the rest of the journey! Is your rope bought or homemade? Vaddoc Thank you Vaddoc, The rope is homemade with DMC thread. My ropewalk is manual operated and vertical. It is very unpractical. I have to stand on a ladder to operate the handle. I am not really satisfied by it. I would like to make such one like you showed us in your Deben 5-tonner log in September. I was very pleased by the video that you posted then. GrandpaPhil, KeithAug, michael mott and 7 others 10 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
Jim Lad Posted January 8, 2020 Share #128 Posted January 8, 2020 Geert, I think an updated ropewalk is indicated! John Moab and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
G.L. Posted January 11, 2020 Author Share #129 Posted January 11, 2020 On 1/8/2020 at 9:03 PM, Jim Lad said: Geert, I think an updated ropewalk is indicated! John Yes John, I have the same thought. mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 11, 2020 Author Share #130 Posted January 11, 2020 12.2 Rigging of the center board. The center board can be lowered and hauled with a tackle of two single blocks. GrandpaPhil, druxey, Baker and 5 others 8 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 11, 2020 Author Share #131 Posted January 11, 2020 (edited) 12.3 Rigging of the mast 12.3.1 Standing rig The mast is supported by three stays: One to the stem and two to the chain plates at the sides. 12.3.1 Running rig Top of the mast and gaff: 12.3.2 Running rig main sheet. Edited January 11, 2020 by G.L. GrandpaPhil, KeithAug, druxey and 5 others 8 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 11, 2020 Author Share #132 Posted January 11, 2020 12.3.2 Rigging of the gaff I think that the pictures speak for themselves. I more explanation is needed, just ask for it. FriedClams, druxey, KeithAug and 3 others 6 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 11, 2020 Author Share #133 Posted January 11, 2020 12.3.3 Rigging of the boom The goose neck The outer end of the boom Thank you to follow Thank you for the likes Thank you for the constructive comments Till next week! Baker, Bedford, cog and 5 others 8 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
michael mott Posted January 11, 2020 Share #134 Posted January 11, 2020 Hello Geert in looking at your gaff peak halliard if it were me i would spread the load a little wider like this I think that it would lessen the possibility of straining the gaff , Just my own thought. Michael KeithAug, GrandpaPhil, mtaylor and 5 others 8 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
vaddoc Posted January 11, 2020 Share #135 Posted January 11, 2020 Wonderful photos, makes you want to get in and set off! I very much like your choice of wood as well. michael mott, mtaylor and FriedClams 3 Quote Current projects: 21' Fisherman's Launch - plans by Howard Chapelle Hercules Steam Tugboat - scratch build from half model lines Completed projects: 21' Yawl Longboat - plans from the National Maritime Museum Deben 5 tonner - a Whisstock yard design 24' exploration gaff rigged ketch - a Tad Roberts design 15' knockabout sailing boat Link to comment Share on other sites More sharing options...
michael mott Posted January 11, 2020 Share #136 Posted January 11, 2020 The second photo looking forward in post #130 looks like the full size boat, superb modelwork! FriedClams, mtaylor and Baker 3 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
KeithAug Posted January 11, 2020 Share #137 Posted January 11, 2020 I agree with Michael, is is hard to tell wether I am looking at a model or the real thing. Excellent workmanship GL. mtaylor, FriedClams and Baker 3 Quote Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846 Link to comment Share on other sites More sharing options...
Jim Lad Posted January 11, 2020 Share #138 Posted January 11, 2020 More excellent work - she looks superb. John Baker, mtaylor, Moab and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Moab Posted January 12, 2020 Share #139 Posted January 12, 2020 I agree with the comments above.....everything is looking excellent. I'm not an expert but your rope looks great...Moab Baker, FriedClams and mtaylor 3 Quote Completed Builds: Virginia Armed Sloop...Model Shipways Ranger...Corel Louise Steam Launch...Constructo Hansa Kogge...Dusek Yankee Hero...BlueJacket Spray...BlueJacket 26’ Long Boat...Model Shipways Under Construction: Emma C. Berry...Model Shipways Link to comment Share on other sites More sharing options...
Peter Cane Posted January 13, 2020 Share #140 Posted January 13, 2020 I am glad that two people have already said that they thought they were looking at the real thing. That exact thought went through my mind but I did not want to make a fool of myself by asking. This means you have fooled at least three people including me into having thought it was the real thing. That is surely the whole point. What a modeller!!!! Pete FriedClams, Baker, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
FriedClams Posted January 13, 2020 Share #141 Posted January 13, 2020 Beautiful work G.L. - and I echo the statements of others on the boats’ authentic appearance. The model looks absolutely real. Wonderful choice of woods and color tone. Sweet work! Gary Baker, mtaylor and Moab 3 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox Link to comment Share on other sites More sharing options...
Bedford Posted January 13, 2020 Share #142 Posted January 13, 2020 (edited) On 1/12/2020 at 1:54 AM, michael mott said: Hello Geert in looking at your gaff peak halliard if it were me i would spread the load a little wider like this I think that it would lessen the possibility of straining the gaff , Just my own thought. Michael Michael is correct, the plans for my Tammie Norrie show the span attached to the boom in similar positions to what Michael has drawn, the idea is that the gaff and sail are supported at the throat by the throat halyard and at even spacings along its length by the peak halyard via the span. Edited January 14, 2020 by Bedford mtaylor, yvesvidal, KeithAug and 1 other 4 Quote Ships built :- Schooner for Port Jackson Thermoplylae Bluenose II Full size Tammie Norrie dinghy 1:8 scale Miss Caroline, model of the full size boat I built Under construction :- Royal Caroline, this one is special as it is in memory of my 13 year old daughter, Caroline who passed away in 2005 Miane three masted schooner R/C, scratch build (on hold) Charles W Morgan (on hold) Scratch designed and built R/C Mahogany and Walnut speedboat (on hold) In the que :- S.T. Waratah, maybe! Link to comment Share on other sites More sharing options...
G.L. Posted January 16, 2020 Author Share #143 Posted January 16, 2020 (edited) On 1/11/2020 at 3:54 PM, michael mott said: Hello Geert in looking at your gaff peak halliard if it were me i would spread the load a little wider like this I think that it would lessen the possibility of straining the gaff , Just my own thought. Michael On 1/14/2020 at 12:35 AM, Bedford said: Michael is correct, the plans for my Tammie Norrie show the span attached to the boom in similar positions to what Michael has drawn, the idea is that the gaff and sail are supported at the throat by the throat halyard and at even spacings along its length by the peak halyard via the span. Hello Michael and Bedford, Thanks for your critical look at my model and for your useful hints. Boatbuilding technically your remark is probably correct. I made my model accordingly to the drawings (see below). The only thing that I can mention to my defense is that the boat is not designed to sail on open sea, but in sheltered waters like on a river or on a lake and probably only in nice weather. In such conditions the force on the gaff will not be so heavy. Edited January 16, 2020 by G.L. Bedford, FriedClams, mtaylor and 1 other 4 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 16, 2020 Author Share #144 Posted January 16, 2020 On 1/11/2020 at 3:54 PM, vaddoc said: Wonderful photos, makes you want to get in and set off! I very much like your choice of wood as well. On 1/11/2020 at 4:00 PM, michael mott said: The second photo looking forward in post #130 looks like the full size boat, superb modelwork! On 1/11/2020 at 7:51 PM, KeithAug said: I agree with Michael, is is hard to tell wether I am looking at a model or the real thing. Excellent workmanship GL. On 1/11/2020 at 8:59 PM, Jim Lad said: More excellent work - she looks superb. John On 1/12/2020 at 2:01 AM, Moab said: I agree with the comments above.....everything is looking excellent. I'm not an expert but your rope looks great...Moab On 1/13/2020 at 10:01 PM, Peter Cane said: I am glad that two people have already said that they thought they were looking at the real thing. That exact thought went through my mind but I did not want to make a fool of myself by asking. This means you have fooled at least three people including me into having thought it was the real thing. That is surely the whole point. What a modeller!!!! Pete On 1/14/2020 at 12:18 AM, FriedClams said: Beautiful work G.L. - and I echo the statements of others on the boats’ authentic appearance. The model looks absolutely real. Wonderful choice of woods and color tone. Sweet work! Gary Vaddoc, Michael, Keith, John, Moab, Pete and Gary, your encouraging comments are much appreciated. It pleases me very much that you like my work. mtaylor and FriedClams 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
michael mott Posted January 16, 2020 Share #145 Posted January 16, 2020 Geert "The only thing that I can mention to my defense is that the boat is not designed to sail on open sea, but in sheltered waters like on a river or on a lake and probably only in nice weather. In such conditions the force on the gaff will not be so heavy." Thanks for your explanation of why you made it the way you did. The actual physics of the arrangement in the drawing would still put a much greater strain on the Gaff regardless of the weather conditions. Please I hope you don't misunderstand my intention It is my opinion the whoever drew that arrangement likely was not a seasoned sailor. That does not detract from the superb model that you have built. Michael Baker, G.L., druxey and 1 other 4 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
G.L. Posted January 19, 2020 Author Share #146 Posted January 19, 2020 On 1/16/2020 at 10:27 PM, michael mott said: Geert "The only thing that I can mention to my defense is that the boat is not designed to sail on open sea, but in sheltered waters like on a river or on a lake and probably only in nice weather. In such conditions the force on the gaff will not be so heavy." Thanks for your explanation of why you made it the way you did. The actual physics of the arrangement in the drawing would still put a much greater strain on the Gaff regardless of the weather conditions. Please I hope you don't misunderstand my intention It is my opinion the whoever drew that arrangement likely was not a seasoned sailor. That does not detract from the superb model that you have built. Michael Hello, Michael, I have not known Mr Van Beylen (the designer) personally, but you are probably right that he was not a seasoned sailor. He drew the boat as a modeler course. In any case I will take your remark with me to the monthly meeting with my local modeler friends next Saturday and look what their opinion is: stick to the original design of Mr Van Beylen or change the gaff and make a more seaworthy boat. Moab, mtaylor, michael mott and 1 other 4 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
G.L. Posted January 19, 2020 Author Share #147 Posted January 19, 2020 13. The sails I postponed it for as long as possible, but now I have to start to make sails. This model is already my second model waiting for sails. I will continue first with this gaff sail boat because the sails are less complicated than those for my Ostend shrimper. Nevertheless I will have learn operating my wife's sewing machine, so it will take some time and probably the progress of this log will slow down a bit. Anyway it will be more agreeable to work in the warm kitchen than in my cold workshop in this winter time. Today I made the paper patterns for the sails because this afternoon I will have the first lessons in stitching with the sewing machine by my wife. I have first learn to stitch long straight lines on a piece of cloth. When that works I cut the foresail accordingly to the pattern and I'm going to work with the sewing machine. For this run I have to concentrate fully on my work and did not make any pictures of the production process but when I make the main sail I will make it up to you. This evening the fore sail is sewed. There is still a lot to do at it, but I cannot resist to attach it to the model with the help of some pins. Thank you to follow Thank you for the likes Thank you for the constructive comments Till next week! michael mott, FriedClams, KeithAug and 7 others 10 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
vaddoc Posted January 19, 2020 Share #148 Posted January 19, 2020 Well, the peak halyard indeed does look a bit odd. Two ways of looking at it. Either you follow exactly what the designer had in mind, or you change the rigging to suit your needs. After all it is your boat and in real life I think during the initial fitting and much more during the life of the boat, many changes take place. I d say rig it as you like! I was looking again at your photos, I think the vividly grained wood works incredibly well at this scale! The boat is alive, the more boring woods like pear and boxwood would not achieve this I think. Lovely! mtaylor, Moab and G.L. 3 Quote Current projects: 21' Fisherman's Launch - plans by Howard Chapelle Hercules Steam Tugboat - scratch build from half model lines Completed projects: 21' Yawl Longboat - plans from the National Maritime Museum Deben 5 tonner - a Whisstock yard design 24' exploration gaff rigged ketch - a Tad Roberts design 15' knockabout sailing boat Link to comment Share on other sites More sharing options...
Moab Posted January 19, 2020 Share #149 Posted January 19, 2020 Looking good!...Moab mtaylor and G.L. 2 Quote Completed Builds: Virginia Armed Sloop...Model Shipways Ranger...Corel Louise Steam Launch...Constructo Hansa Kogge...Dusek Yankee Hero...BlueJacket Spray...BlueJacket 26’ Long Boat...Model Shipways Under Construction: Emma C. Berry...Model Shipways Link to comment Share on other sites More sharing options...
mtaylor Posted January 20, 2020 Share #150 Posted January 20, 2020 A little spray starch and an iron and the sail will be shipshape. Baker and G.L. 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.