Jump to content

HMS Winchelsea 1764 by RBohlman - 1:48


Recommended Posts

I am planning to try my 1st scratch model with the HMS Winchelsea.

I have a little work to finish on my New Bedford Whaleboat before I start.

I will most likely be purchasing some of the laser cut items.

Looking forward to this as a fun project and a great learning activity.

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Getting very, very close to finishing my New Bedford Whaleboat, so I ordered the laser cut parts

for chapter one of the HMS Winchelsea this morning from Syren Ship Model Company.

Looking forward to the fun of building her and learning about non-kit building!

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Received my order yesterday from Syren for the laser cut parts for Chapter One of the Winchelsea 1764 project.

 

I ordered the parts for Chapter Two and the Brackets for the false keel last night.

 

Ordered a Wren scroll saw and extra blades from Amazon this morning, I have also been watching YouTube videos on using a scroll saw.

 

IMG_1185.JPG

Edited by RBohlman
update

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Printed and cut out pattern for False Keel yesterday.

Made a trip to my local Home Depot for some 1/4" plywood and sandpaper.

My Wen Scroll Saw should arrive from Amazon this afternoon and going to practice with it awhile before

starting the cutting of any Winnie parts.  Heading out the Walmart early this morning for a can of Krylon spray temporary glue.  :)

IMG_1188 (2).JPG

Edited by RBohlman
update

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Spent the morning getting my new scroll saw set up for Winnie.

 

It gets hot here in Mississippi, so planning to do some practice work tomorrow and then

start my False Keel and Bulkhead work.

IMG_1190.JPG

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

I got to work a little on the printing and plywood cutouts for my Winnie.

I had to stop before noon as the garage gets very hot here in central Mississippi.

I plan to do some scroll saw work tomorrow morning early while it is still some what cool.

 

IMG_1192.JPG

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Received my Syren order yesterday, Chapter Two & Bracket laser wooden parts.  I have started cutting out the bulkheads on my new Wen scroll saw, l am using an Olson PGT No. 7RG blade.

The No. 7RG seems to work well, but being a newbie to scroll saw work, is this the best blade for cutting out the 1/4" plywood bulkheads?

As always, Thanks for the help!

Bulkheads.JPG

Edited by RBohlman
Typo

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Watched your New Bedford Whale Boat build, I'm sure you'll do a great job here too!, I'll be watching with interest.

     Current:         Emma C. Berry Lobster Smack-Model Shipways-1:32-1866

        Back on the shelf:    USS Essex- MS- "Old Yellow Box" Solid Hull  Wall Hanger (Half Hull)                                                                                                                                                                                              

   Completed:    18th Century Armed Longboat-MS 1/24

                          USN Picket Boat-MS 1864 1/24                                  

                          US Brig Syren by Sea Hoss- Model Shipways-1803

                          18th Century Carronade/Ship Section

                          Mayflower-Pilgrims Pride by Sea Hoss-Model Shipways-1620

                          18th Century Long Boat by Sea Hoss-Model Shipways

                          USS Constitution by Sea Hoss-Revel-Plastic

Link to comment
Share on other sites

Getting ready to build my brackets and stand to support my Winnie as a construct her and have a few questions.

 

What size is the wood base the model is build on in this early stage?

What is the size of the wooden strips used between each bracket?

Are the wood strips glued or screwed in place?

What size screws are needed for the six (6) brackets?

 

Thanks as always for the help!

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

It’s not really important.  Just use any scrap you have laying around.  Make sure the base is larger than the model is long and wider as well.  That’s about it.  The strips can’t be wider or taller than the keel but anything will work.

Link to comment
Share on other sites

I got to work some more on my Winnie this morning.

I have been dry fitting my bulkheads to the false keels as I cut them out.

I have not glued anything at this point just checked the fit of the sections as I cut them out.   :)

IMG_1194.JPG

Edited by RBohlman
Typo

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Working on Brackets for false keel and finishing up cutting out false keel sections.

IMG_1196.JPG

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

She’s looking great!  What variety of Home Depot plywood are you using?  I was thinking about starting this project and doing the same thing, but I am not sure which 1/4 inch plywood would work well versus the more expensive Baltic birch 5-ply stuff that I’ve seen at the craft stores.  I don’t mind spending $70 on plywood, unless I can get away with spending $30.

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

1 hour ago, Matt D said:

She’s looking great!  What variety of Home Depot plywood are you using?  I was thinking about starting this project and doing the same thing, but I am not sure which 1/4 inch plywood would work well versus the more expensive Baltic birch 5-ply stuff that I’ve seen at the craft stores.  I don’t mind spending $70 on plywood, unless I can get away with spending $30.

Guess I'm just cheep at heart ~ The $5.00+ per each 1/4" 2'x2' Home Depot plywood.

Since it will be planked over anyway,  I just went cheep for the False Keel & Bulkheads.

I did go through the bin and picked out the best looking plywood pieces.

Edited by RBohlman

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Getting close to setting up the false keel on a base board.

Not sure what size board to mount the false keel onto?

Suggestions please!

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

The last 2 pages in the Chapter One notes from Chuck show his board and supports - you can estimate sizes from that.

 

 

Doug

Current BuildsBluenose II - AKrabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel

On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy

Suspended Build: Bluenose II - Billing Boats Nr 600 

Link to comment
Share on other sites

36" long and about 12" wide will do the trick.  Make sure its at least 1/2" thick and not warped.  MDF is perfect for this.   

Link to comment
Share on other sites

11 hours ago, Chuck said:

36" long and about 12" wide will do the trick.  Make sure its at least 1/2" thick and not warped.  MDF is perfect for this.   

THANKS ~ Just the info that I needed!

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

False Keel glue up coming together well!

Keel & stand next after finishing bow section.

IMG_1197 (2).JPG

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Working on Rabbet Strips today!  :)

IMG_1198 (2).JPG

Edited by RBohlman
Typos

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

I finished my Bulkhead Form and my next step is to construct the Build Board.

I have all the wood and parts needed but it is so very hot in the garage this afternoon , 102 degrees, here in Mississippi.

I hope to do some table saw work in the morning!

 

IMG_1199 (2).JPG

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Completed the construction of my Build Board for my Winnie.

Now, on to cutting out and fitting the remainder of my bulkheads on my WEN scroll saw. 

IMG_1200 (2).JPG

Edited by RBohlman
Typos

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

Chapter one is much longer...at 27 pages...you only read the first half.   Download it again.  It looks very good.

Link to comment
Share on other sites

58 minutes ago, Chuck said:

Download it again....

Yes Sir, Got the full Chapter One file downloaded now ~ THANKS!

CURRENT BUILD:

HMS Winchelsea, 1764 ~ 1:48 scale

 

COMPLETED BUILDS:

New Bedford Whaleboat ~ 1:16 scale

Ships in Bottles Models

Card Stock Nautical Models

 

~Donor & Member of Nautical Research Guild~

 

 

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...