CRI-CRI Posted January 8, 2020 #1 Posted January 8, 2020 Before Saint Philippe, a little work : the Niña, scratch in scale 1/48 It was the 3rd boat of 1st Cristoforo Colombo's journey - 1492 yvesvidal, GrandpaPhil, Peter Bloemendaal and 8 others 11
GrandpaPhil Posted January 9, 2020 #2 Posted January 9, 2020 Looking forward to seeing this build! mtaylor 1 Building: 1:200 Russian Battleship Oryol (Orel card kit) 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships)
CRI-CRI Posted January 9, 2020 Author #3 Posted January 9, 2020 Moulded main-frame... FriedClams, GrandpaPhil, mtaylor and 6 others 9
CRI-CRI Posted January 10, 2020 Author #4 Posted January 10, 2020 Templates of frames... mtaylor, Edwardkenway, yvesvidal and 4 others 7
Louie da fly Posted January 11, 2020 #5 Posted January 11, 2020 Caravels are such beautiful vessels. I'll be following this build with interest. Steven It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
CRI-CRI Posted January 11, 2020 Author #6 Posted January 11, 2020 Thanks all... Today works with the ten fore templates (main is number seven) yvesvidal, GrandpaPhil, DelF and 7 others 10
Bossman Posted January 11, 2020 #7 Posted January 11, 2020 That was quick. I will be following along. mtaylor 1 Current build: Model Shipways “Confederacy “ Completed builds: Mamoli “Royal Louis“ Mantua “Royal Caroline” Scratch 1/4 scale gondola “Philadelphia” Scratch “Hannah” from Hahn plans.
CRI-CRI Posted January 11, 2020 Author #8 Posted January 11, 2020 Following with rabbet... SigEp Ziggy, Louie da fly, Boxbuilds and 5 others 8
CRI-CRI Posted January 12, 2020 Author #9 Posted January 12, 2020 Preparation for sawing the frames of hull... SigEp Ziggy, FriedClams, yvesvidal and 6 others 9
SigEp Ziggy Posted January 12, 2020 #10 Posted January 12, 2020 This is a great build thus far, I will watch with great interest. I am building a 1/144 scale version based on a Lindberg kit and kitbashing using Amati plans. Where did you get your drawing/plans? mtaylor 1 Your Shipmate, Ziggy Current Builds: USS Arizona and Memorial Columbus Ship Nina HMS Blandford Cross-section
CRI-CRI Posted January 13, 2020 Author #11 Posted January 13, 2020 The plan is a 1/48 adapted scan of a book Anatomy of the Ships by Javier Pastor Today, I've transfered the drawing of templates before handy cut by saw... FriedClams, Ryland Craze, yvesvidal and 5 others 8
CRI-CRI Posted January 14, 2020 Author #12 Posted January 14, 2020 First cut : main-frame (not glued)... FriedClams, davec, Louie da fly and 5 others 8
CRI-CRI Posted January 14, 2020 Author #13 Posted January 14, 2020 Allegro con brio, molto espressivo... 😋 Edwardkenway, Louie da fly, FriedClams and 4 others 7
CRI-CRI Posted January 16, 2020 Author #14 Posted January 16, 2020 Today works (nothing glued)... Edwardkenway, Haliburton, Zarkon and 9 others 12
CRI-CRI Posted January 16, 2020 Author #15 Posted January 16, 2020 Good sunlight, this afternoon : all fore frames done, except the second... GrandpaPhil, mtaylor, bruce d and 6 others 9
CRI-CRI Posted January 17, 2020 Author #16 Posted January 17, 2020 Today : scaled surgery... Louie da fly, davec, GrandpaPhil and 6 others 9
yvesvidal Posted January 17, 2020 #17 Posted January 17, 2020 So, you are testing the water with a scratch build, before going for the big challenge? Very good idea. Yves Louie da fly and mtaylor 2
CRI-CRI Posted January 18, 2020 Author #18 Posted January 18, 2020 Today rectifications on four frames... Louie da fly, GrandpaPhil, FriedClams and 3 others 6
CRI-CRI Posted January 18, 2020 Author #19 Posted January 18, 2020 Frames 1-7 : rectification done (nothing glued)... ccoyle, yvesvidal, FriedClams and 5 others 8
the learner Posted January 18, 2020 #20 Posted January 18, 2020 Great start mtaylor 1 Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
CRI-CRI Posted January 19, 2020 Author #21 Posted January 19, 2020 Test of a new assembling process... bruce d, BenF89, GrandpaPhil and 3 others 6
CRI-CRI Posted January 20, 2020 Author #22 Posted January 20, 2020 Views of frames 4 to 8... BenF89, Edwardkenway, GrandpaPhil and 8 others 11
CRI-CRI Posted January 21, 2020 Author #23 Posted January 21, 2020 Adding 2 & 3... yvesvidal, BenF89, bruce d and 8 others 11
CRI-CRI Posted January 22, 2020 Author #24 Posted January 22, 2020 (edited) Views of frames 1 to 11... Edited January 23, 2020 by CRI-CRI GrandpaPhil, davec, FriedClams and 6 others 9
CRI-CRI Posted January 23, 2020 Author #25 Posted January 23, 2020 1 - 13 cut... Edwardkenway, bruce d, Louie da fly and 4 others 7
CRI-CRI Posted January 24, 2020 Author #26 Posted January 24, 2020 Views of frames 1-14, following 15 & 16 and back stern (nothing glued) The test of handy cut seems successful 😋 Louie da fly, Edwardkenway, yvesvidal and 5 others 8
CRI-CRI Posted January 25, 2020 Author #27 Posted January 25, 2020 I saw three ships... 😋 Louie da fly, bruce d, davec and 6 others 9
Michel Bénard Posted January 26, 2020 #28 Posted January 26, 2020 Go to America ! mtaylor, Louie da fly and bruce d 3
CRI-CRI Posted January 27, 2020 Author #29 Posted January 27, 2020 Project for adding helm-port... Ondras71, davec, FriedClams and 6 others 9
CRI-CRI Posted January 29, 2020 Author #30 Posted January 29, 2020 A joke, go down, Caroline, to let the people sleep... (1/48 scale figure...) 😋 mtaylor, archjofo, Ondras71 and 5 others 8
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now