Jump to content

Recommended Posts

Posted

Many interesting details!
I never noticed the wooden hook to keep the sheets out of the water before.

Monkey face, -excellent name, just what it looks like!
 

I noticed with regards to the monkey face plates that the Cutty Sark museum rigs them with the reef tackle holding them outwards.
(Something that I don't think I have ever seen on models of the Cutty Sark)

 

/Peter

Posted

Main mast dead eyes (left side) on place

 

Short video of present stage

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Just wow, Nenad.   She looks wonderful.    This video captures her perfectly.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Her Majesty is looking ... majestic !!

:cheers:

CaptainSteve
Current Build:  HM Granado Bomb Vessel (Caldercraft)

My BathTub:    Queen Anne Barge (Syren Ship Models)       Log:  Queen Anne Barge (an build log)

                        Bounty Launch (Model Shipways)                 Log:  Bounty Launch by CaptainSteve
                        Apostol Felipe (OcCre)
                        HMS Victory (Constructo)
Check It Out:   The Kit-Basher's Guide to The Galaxy

Website:          The Life & Boats of CaptainSteve

Posted

Hi Nenad

 

the first look at the whole ship, she`s great!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Posted

I'm impressed...Nedad.  Following you from the beginning and watching you make mistakes..correct.....change....modify....again and again as you perfected the model and your skills.  Very mice indeed.

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Posted (edited)

Hmmm... pretty nervous week from unknown reason, with rain, rain, rain ... and 100% humidity in air ... not usual in this area

 

 

 

Just wow, Nenad.   She looks wonderful.    This video captures her perfectly.

 

Thx Mark. With Phone camera it is pretty good. Some details ( rivets on "cooper" plates) are not captured well. Only 5MP camera

 

 

Hi Nenad

Seeing your video really put a smile on my face because of how beautiful your CS looks! Really, really, really nice!

Keep it up.

Cheers

Patrick

 

 

Thx Patrick. 

 

That gives a nice touch to your build log, Nenad. Your Cutty Sark looks real good on film too!!

 

 

Thx Carl. My artistic approach towad mistakes I made obviously has results

 

Her Majesty is looking ... majestic !!

:cheers:

 

Thanks Cap. 

 

 

Hi Nenad

 

the first look at the whole ship, she`s great!

 

Regards

Gerhard

 

Thanks Gerhard. I did my best

 

I'm impressed...Nedad.  Following you from the beginning and watching you make mistakes..correct.....change....modify....again and again as you perfected the model and your skills.  Very mice indeed.

 

Rob

 

Thanks Rob. Some mistakes are still presented very well ( width of inner bulwark)

 

 

i just watch your video Nenad  and yes you did a great job ! 

 

Thank you  very much for nice words. I am almost satisfied with results to date. Still a lot to go

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Hi Nenad

Thats what we see, you really did the best!

Much rain will only mean, there will be a bit more of Yucca to extinct :rolleyes: ......................

You should chant like they did it in 1969 in Woodstock "No Rain No Rain....."

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Posted (edited)

Hi Nenad

Thats what we see, you really did the best!

Much rain will only mean, there will be a bit more of Yucca to extinct :rolleyes: ......................

You should chant like they did it in 1969 in Woodstock "No Rain No Rain....."

 

Regards

Gerhard

 

My yucca-war was succesfull ( for now). But grass ... this season grass grows rapidly every time when I look at it in yard !

 

Rather this song:

 

 

Somewhere in the past, I found led Zeppelin musical notation for first five albums, and enjoyed very much playing my el. guitar, acoustic guitar and 12-wire guitar, particular this song. ( and of course, Stairway to Heaven, and Babe I`m gonna leave you  etc etc)

 

Old times ...  

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted (edited)

Nenad

 

Ship looking good.

 

now this.

My yucca-war was successful ( for now). But grass ... this season grass grows rapidly every time when I look at it in yard !

 

Arrogant grass you have, at least mine waits until I turn my back. If mine flaunted it's independence so flagrantly, there might be a Monsanto Round Up.

jud

Having grown up on a Ranch about 18 miles from the Pendleton Round Up, the words round up create an image for me of a rough sport as well as a herbicide.

Edited by jud
Posted

Lovely work Nenad and a great touch with that video.

 

Cheers,

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Posted (edited)

Thanks Jud. I hope there will not be need for herbicide. Quite enough we eat every day in food, even we do not want, aren't we?

 

Thx Piet. I faced with resolution issue ... 15 sec video clip recorded in HD resolution has more than 200MB. Tonight I made two more clips with details, but just had no patience to wait for them to upload to YT, even watching second time how Daeneris burned Mastet's ships ....;)

 

So, only photos of tonight progres

 

post-4738-0-36115100-1466625099_thumb.jpg

 

post-4738-0-33323200-1466625127_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Oh yes, that deck shot is just marvelous, simply marvelous.  Dead-eyes lined up nicely and the deck looks weathered, great job Nenad.

Piet, The Flying Dutchman.

 

"Your greatest asset is not the quantity of your friends , rather the quality of your friends."  (old Chinese proverb)

 

Current Builds: Hr. Ms. Java 1925-1942

                       VOC Ship Surabaya

 

Planned Builds: Young America Diorama - scale 1:3000

 

Future Builds: KPM ship "MS Musi."  Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp,  Buginese fishing Prauw.  Hr. Ms. Java - Royal Navy Netherlands Cruiser.

 

Completed Builds:   Hr. Ms. O16 Submarine

                             Hr. Ms. O19 - Submarine Royal Navy Netherlands

                             Ship Yard Diorama with Topsail schooner -

                             Friendship Sloop Gwenfra

                           Muscongus Bay Lobster Smack    

                             Golden Hind - Cutte Sark (both not in this forum)

Posted

Nenad,

 

Your soldiers are looking spiffy, and their parade ground looks immaculate, no need to get the last pieces of dirt out with a toothpick. A lovely job if I may say so

 

Cheers

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Posted

Hi Nenad

 

Great job, they look good! Can`t wait to see her masted and rigged...................

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Posted

looking good Nenad..........I'm play'in catch up  :)    nice video.......I didn't know you directed too;)    happy to see you overcame the dead eye issue.

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Oh yes, that deck shot is just marvelous, simply marvelous.  Dead-eyes lined up nicely and the deck looks weathered, great job Nenad.

 

Thank you Piet. If you can remember, there were many experiments finding color for deck. Now, even deck is dirty, and even there are traces on of color dust and garbage on bulwarks, when railings and ( almost all) dead eyes are on place and colored, when inner bulwark content is on place and colored, it seems I hit my goal. It will look more better when I finish dead-eyes, clean deck and start with color correction

 

 

Nenad,

 

Your soldiers are looking spiffy, and their parade ground looks immaculate, no need to get the last pieces of dirt out with a toothpick. A lovely job if I may say so

 

Cheers

 

Thanks Carl. Looking at Her deck with my new magnyfier, I was open-mounted with amount of collected dust. Add to this garbage from holes I drilled for dead eye holders, and you can get complete dirty picture ... which leads me to serious thinking about way to keep her from dust when rigging time comes ... there are some ideas ... including to occupy Hothead`s room only for rigging purpose, with forbidden entry to everyone, particular to cat.

 

 

Hi Nenad

 

Great job, they look good! Can`t wait to see her masted and rigged...................

 

Regards

Gerhard

 

Thanks Gerhard. Patience please !. It is hard to work when  outside is 33 C with 100% humidity in air and subjective feeling as 39 C last two weeks and next couple of days ... Flat is acclimatized, but shipyard is not.

 

And when you jumped as donkey in downtown whole day in dark colored car without acclimatization, in Courts without it also (?) and if you had afternoon full of meetings, only glass of ... anything wet and cold and nirvana state can be applied successfully on me ;). To add that Hothead is at short visiting home,  and we are preparing for big weeding ceremony of my niece at Saturday with 400 guests, which, naturally means that -  when princess came home after work, there is chat chat chat chat until  ... I fall down sleeping in chair, and command break for today 

 

 

looking good Nenad..........I'm play'in catch up   :)    nice video.......I didn't know you directed too;)    happy to see you overcame the dead eye issue.

 

Hello Denis. I noticed your relative absence, following your another logs and posts. Take your time and enjoy in life as much as you can. All builds can wait, life can not 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Nenad,

 

You could setup a vacuum cleaner which sucks all the dust particles away while you are working on the rigging ... or a compressor to blow it away before, during, and after your work session. Another option: just have a few ants run around with holy stones and water to scrub the deck  :)  ;)

 

Cheers

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Posted

Nenad,

 

You could setup a vacuum cleaner which sucks all the dust particles away while you are working on the rigging ... or a compressor to blow it away before, during, and after your work session. Another option: just have a few ants run around with holy stones and water to scrub the deck  :)  ;)

 

Cheers

 

I have to manipulate and improvise - we have two vacuum cleaners in house - one, more than old, cheep and weak - Chinese no name, which works on principle - what gets in, that exactly gets out. I do not know why till now I did not retire it. Another is - real beast - and too strong - "Rainbow",  which I bought with all accessories to Admiral for cca 2000€ in one of my moments of madness. But, I`ll figure out something 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Hi Nenad

 

Poor man! This is more than one can take alone. 400 guests, 30plus degrees, no acclimatisation, I can feel your pain. But we have hot weather too today, I`m too lazy to do almost anything. Should cool down on sunday I hope the best for that! Have a nice wedding, friend!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Posted

Have a nice wedding, Nenad.  You are right about life not waiting. Her Majesty is patient...   ;)

 

Been there still myself, fighting with life for time in the shop lately.   :(

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted (edited)

Enjoy your day at the wedding Nenad!! Wish them a happy and prosperous life from me!!!

Edited by cog

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Posted

Ouch ... my English ... not Saturday - Sunday ....

 

Thx anyway

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted (edited)

Shipyard temporary changed with "kitchen-yard" :(

 

Hothead's theme for his project and model architecture exame is - school building. Everybody other starts with traditional basic cube form adding details. But him ... no ... why it can be simple when it can be complex ... he started with flower form dressed in glass ... real soon of his father

post-4738-0-03221400-1467268425_thumb.jpg

post-4738-0-08444900-1467268482_thumb.jpg

post-4738-0-19681700-1467268533_thumb.jpg

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Posted

Nenad,

 

We say like father, like son. It seems to work on your family too. Why the easy way if it can be complex. Why accept a minor less perfect part, when it can be perfect ... You should enjoy the time with your son, it will make your bond the stronger. As Patrick wrote: "I'd love to see the 'flower school' when it's fully assembled" wish him success with it!!

 

A pity princess is somewhat inflexible ... well, at least she can go to the beach. By the way, did she needed the kitchen table to make you all dinner  ;)

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...