AdamA Posted February 12, 2022 Author Share #151 Posted February 12, 2022 GrandpaPhil, popash42, scrubbyj427 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
AdamA Posted February 27, 2022 Author Share #152 Posted February 27, 2022 Fashion pieces and filler pieces in. I haven't chiseled, filed or sanded the inside yet. Also I'm going to add bolts since I've decided to leave one side unplanked. tlevine, Keith Black, scrubbyj427 and 4 others 4 1 2 Quote Link to comment Share on other sites More sharing options...
AdamA Posted March 5, 2022 Author Share #153 Posted March 5, 2022 Keith Black, CiscoH, Gregory and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
dvm27 Posted March 5, 2022 Share #154 Posted March 5, 2022 Exceptional joinery work Adam! mtaylor, AdamA and Keith Black 2 1 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752 Link to comment Share on other sites More sharing options...
allanyed Posted March 6, 2022 Share #155 Posted March 6, 2022 I second Greg's comment. Patience, sharp tools and probably some do overs rather than settling and there is the recipe for an achievable feat by other builders. Allan mtaylor, popash42 and Keith Black 3 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
AdamA Posted March 6, 2022 Author Share #156 Posted March 6, 2022 Keith Black, CiscoH, GrandpaPhil and 4 others 7 Quote Link to comment Share on other sites More sharing options...
AdamA Posted March 12, 2022 Author Share #157 Posted March 12, 2022 WalrusGuy, popash42, Niklas and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
AdamA Posted March 14, 2022 Author Share #158 Posted March 14, 2022 Captain Poison, popash42, Dave_E and 5 others 7 1 Quote Link to comment Share on other sites More sharing options...
AdamA Posted March 15, 2022 Author Share #159 Posted March 15, 2022 I finally decided to get this ship her own table inside. I usually work outside on my third floor patio that I converted to a workshop (because we had a baby and the nursery is on the first floor adjacent to the garage where I would probably prefer to work). I couldn't run any machinery if he was napping. So I got a cheap table so I can drill into it as necessary. scrubbyj427, klimi, Dave_E and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Beef Wellington Posted March 15, 2022 Share #160 Posted March 15, 2022 Adam, very much enjoyed catching up on your log, I very much appreciate you showing how you approached the basic wood working of each piece for those of us not too familiar with basic techniques, you make it look simple! A beautiful model you have coming together here, very much want to follow along. mtaylor, Keith Black, AdamA and 1 other 3 1 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
tlevine Posted March 15, 2022 Share #161 Posted March 15, 2022 Since you can drill into the table, I would recommend drilling your mounting holes and bolt the keel to it. Those clamps will not keep everything level. mtaylor, Dave_E and AdamA 3 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
AdamA Posted March 25, 2022 Author Share #162 Posted March 25, 2022 I attached some spacers temporarily inside these frames with CA glue before I sand these. scrubbyj427, Ainars Apalais, popash42 and 6 others 7 2 Quote Link to comment Share on other sites More sharing options...
tlevine Posted March 26, 2022 Share #163 Posted March 26, 2022 Somehow, the words CA and temporarily don't belong in the same sentence. Why not PVA? Dissolves easily in isopropanol. mtaylor 1 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
AdamA Posted March 29, 2022 Author Share #164 Posted March 29, 2022 I have never had any problem removing CA after a day or two for quick holds. Is it supposed to be permanent? Hmm. In the meantime I just ordered all the rest of Byrnes tools. I got the thickness sander last year (and it is a perfect piece of machinery) so I ordered his table saw and disk sander. It's going to be fun opening those boxes in a few weeks. Trond, Keith Black and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Trond Posted March 29, 2022 Share #165 Posted March 29, 2022 14 hours ago, AdamA said: I have never had any problem removing CA after a day or two for quick holds. Is it supposed to be permanent? Hmm. In the meantime I just ordered all the rest of Byrnes tools. I got the thickness sander last year (and it is a perfect piece of machinery) so I ordered his table saw and disk sander. It's going to be fun opening those boxes in a few weeks. I've also been looking on his machines. The only problem is transportation cost and import tax to Norway. Have you tried his rope machine? Keith Black and mtaylor 2 Quote Trond 'Patience Is a Virtue' Current Build: HMS Bounty - Billingboats Link to comment Share on other sites More sharing options...
AdamA Posted March 30, 2022 Author Share #166 Posted March 30, 2022 10 hours ago, Trond said: I've also been looking on his machines. The only problem is transportation cost and import tax to Norway. Have you tried his rope machine? The rope machine will be the only thing I don't have from his website. If it was available without a phone call I would have added it to my latest purchase. It looks really nice. mtaylor and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
AdamA Posted April 8, 2022 Author Share #167 Posted April 8, 2022 I need some small clamps that won't damage the frames. As a stop-gap measure I use tweezers with these clamps attached a short distance away from the business end. It allows me to adjust the power downward. These clamps are so strong they can actually break these frames so this is my solution. GrandpaPhil, Keith Black, Ondras71 and 4 others 7 Quote Link to comment Share on other sites More sharing options...
allanyed Posted April 11, 2022 Share #168 Posted April 11, 2022 Loving your build and thank you for sharing! I know this is well in advance, but what plans are you going to use for the 23 foot launch which has become as famous as the Bounty itself? If you are not yet decided I did a detailed drawing of a 23 foot launch based on NMM drawings and scantlings from the plans as well as the scantlings in W.E. May's book on ships' boats that I can scale to 1:48 if you are interested. I look forward to your next progress post. Allan mtaylor and Keith Black 2 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
AdamA Posted April 14, 2022 Author Share #169 Posted April 14, 2022 Allan, I haven't decided much farther than frames yet. I'd definitely be interested in your drawings. I scratch built the launch for my Mayflower blindly and it may have become a bit too modern by accident. I used a jeweler's saw to start getting the frames to the correct height: popash42, GrandpaPhil, garyshipwright and 2 others 5 Quote Link to comment Share on other sites More sharing options...
allanyed Posted April 14, 2022 Share #170 Posted April 14, 2022 PMing you re: the boat drawings. Allan AdamA and Keith Black 1 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
AdamA Posted April 15, 2022 Author Share #171 Posted April 15, 2022 I just unboxes Byrnes' Model Machines disk sander and table saw. They will replace my standard size sander (which sounded like a boat motor when turned on) and my Microlux tilt table saw (which I've had since 2006). A word of advice to anyone who feels they have lost their childhood amazement and wonder and want to keep it that way: don't buy this table saw and open the box. My gosh. The adjustments are so smooth. Its beautiful. JpR62, allanyed, scrubbyj427 and 6 others 8 1 Quote Link to comment Share on other sites More sharing options...
AdamA Posted April 18, 2022 Author Share #172 Posted April 18, 2022 On 4/14/2022 at 10:43 AM, allanyed said: PMing you re: the boat drawings. Allan This is the launch I built for the Mayflower. I didn't have any detailed plans so I "winged it." As a result, it tuned out to be about 100 years too modern for the sloop on the actual ship. Keith Black, GrandpaPhil, Snug Harbor Johnny and 1 other 4 Quote Link to comment Share on other sites More sharing options...
allanyed Posted April 18, 2022 Share #173 Posted April 18, 2022 It may have been from a different era but it sure looks good!! Allan Keith Black 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
AdamA Posted July 23, 2022 Author Share #174 Posted July 23, 2022 I have my new work area set up so here we go. GrandpaPhil, Keith Black and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
AdamA Posted July 24, 2022 Author Share #175 Posted July 24, 2022 (edited) I took your advice to put weight on these while drying and used a sharpening stone with wax paper to sit on top of the frames as they dry to keep them flat. Then to the Byrnes Thickness Sander (equipment show off incoming) Edited July 24, 2022 by AdamA GrandpaPhil, Trond, Keith Black and 1 other 4 Quote Link to comment Share on other sites More sharing options...
AdamA Posted July 28, 2022 Author Share #176 Posted July 28, 2022 Frame 20 (the first full frame) on the keelson. I had to re-do this frame because I drew the first one with its chock in the wrong place. Trond, tlevine, giampieroricci and 5 others 8 Quote Link to comment Share on other sites More sharing options...
AdamA Posted October 31, 2022 Author Share #177 Posted October 31, 2022 mtaylor, Keith Black, scrubbyj427 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
AdamA Posted December 29, 2023 Author Share #178 Posted December 29, 2023 Time for more framing. I'm still using this board of Swiss pear, but now it's much dryer. CiscoH, Niklas, Keith Black and 2 others 5 Quote Link to comment Share on other sites More sharing options...
AdamA Posted December 31, 2023 Author Share #179 Posted December 31, 2023 I haven't sanded or polished but this is where I left off. mtaylor and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
AdamA Posted December 31, 2023 Author Share #180 Posted December 31, 2023 CiscoH, modeller_masa, Keith Black and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.