Jump to content

Recommended Posts

Posted
6 hours ago, Keith Black said:

More later regarding that at a later time.   

 I may as well get into this....... five years ago I had a stint put in my abdominal aorta while undergoing an operation repair an aneurysm that at the time measured 6.4 cm. I've been going for Ultrasound testing annually since the operation with the aorta measuring 5.9 cm every year till my last visit on Tuesday. They think and I stress thy think I've developed an endoleak and the sack is currently measuring 6.4 cm, so we're back to where we were five years ago. 

 

 I have a CT scan scheduled for April 30th to verify the above. I might not have a leak or I could be about to blow? They almost lost me on the operating table five years ago and now, here we are five years later and I'm five years older and I sure don't heal any faster now.  If I do in fact have a endoleak I will require surgery, when that surgery takes place is anyone's guess but I would hope it would be sooner than later. I won't know anything for sure till the 30th. 

 

 Having said the above, I've put Lula on a fast track to get as much done as possible prior to the 30th and that's while doing things around the house to help ensure Maggie's current and future welfare. I wouldn't have said anything but future actions regarding Lula might lead some of you to scratch your heads wondering about my motives behind certain decisions.  

 

  Keith

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

Keith, thanks for the update. I know it can be hard to share stuff like that and it's thoughtful of you to worry about US! Certainly the "it's your model" rule applies and no comments were intended as criticism, just ongoing discussion of the modeling process. It is and will be a fantastic model! I know it'll be extra hard on you trying to prepare for Maggie's welfare while you're under the knife, so hang in there. We're all pulling for you.

Posted
14 hours ago, BANYAN said:

Really looking good Keith.  Agree with Eric re the 'wooding' of the view forward - still looks ()no pun intended) great though

 Thank you, Pat.

 

13 hours ago, vossiewulf said:

Sorry to hear that Keith. Hang in there.

  Thank you, Vossie

 

12 hours ago, Cathead said:

Keith, thanks for the update. I know it can be hard to share stuff like that and it's thoughtful of you to worry about US! Certainly the "it's your model" rule applies and no comments were intended as criticism, just ongoing discussion of the modeling process. It is and will be a fantastic model! I know it'll be extra hard on you trying to prepare for Maggie's welfare while you're under the knife, so hang in there. We're all pulling for you.

 Thank you, Eric.

 

12 hours ago, Glen McGuire said:

Dang, Keith.  Prayers for you and Maggie.

 Thank you, Glen.

 

6 hours ago, wefalck said:

Keeping fingers crossed ...

 Thank you, Eberhard.

 

3 hours ago, LJP said:

You are in my thoughts.  Your health and your wife's welfare is what is really important.

 Thank you. LJP

 

1 hour ago, FriedClams said:

Stay positive and strong, Keith.  You're in my thoughts and wishing for the best possible results of your upcoming scan.

 Thank you, Gary.

 

 Thank you guys for you kind comments and thoughts. 

 

 

The pilot house is ready for trim which I hope to get added today leaving the lettering transfer and hanging the rear PH door. 

B62DAF1F-8CE2-403D-BFA6-A0F0EB60C1B3.thumb.jpeg.7f39ef9a42f4d3f0b296cf51e6176b71.jpeg

 

4478619E-D6D9-4FD9-9513-5C046A90B093.thumb.jpeg.945593263f11a9579a776054855be6c2.jpeg

 

22B4B491-C076-4F06-867E-0B7FB2DA3FA3.thumb.jpeg.9a4da528b182f672cf3c752eb3f6b6f0.jpeg

 

BEB1400A-D032-4E65-A087-25BC4A62713E.thumb.jpeg.96839d3c5f99e1f52b3809711724bb5c.jpeg

 

A162B347-7428-4682-AA06-49B977E5013D.thumb.jpeg.0a752fafed0f57a4f44821c5924d1a66.jpeg

 

  Thank you to everyone for your support.

 

    Keith 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
8 minutes ago, Paul Le Wol said:

Keith, my thoughts and prayers are with you.

Thank you, Paul.  

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted (edited)

Back on the list you go, both of you with a note do not remove from list. Thoughts and prayers my friend,  you have made my journey easier and I hope HE makes your journey easier as well. All the best my friend.  

Bob  M.

Edited by Knocklouder
Typos

"Start so you can Finish!" 

In progress:

Astrolabe 1812 - Mantua 1:50; 

In queue:

Pegasus - Amati 1:64 

Completed:

The Dutchess of Kingston - 1:64 Vanguard Models 🙂 
Santa Maria - 1:64, La Pinta - 1:64, La Nina - 1:64, Hannah Ship in a Bottle - 1:300, The Mayflower - 1:64, Viking Ship Drakkar -1:50 all by Amati. King of the Mississippi - Artesania Latina - 1:80  Queen Anne's Revenge - Piece Cool - 1:300  The Sea of Galilee Boat - Scott Miller - 1:20

Posted
16 minutes ago, Knocklouder said:

Back on the list you go, both of you with a note do not remove from list. Thoughts and prayers my friend,  you have made my journey easier and I hope HE make your journey easier as well. All the best my friend.

 Thank you so very much, Bob. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

Very nice work on the pilot house. Sorry to hear about the medical issues, hope all goes well!

Posted

You're both on my prayer list Keith. I'm in a similar boat with wife being the sick one right now. I'm under a watchful waiting period with my leaky aortic heat valve, too.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Posted

Best wishes for a speedy recovery from Mary and me.

Take care,

Kurt

 

Kurt Van Dahm

Director

NAUTICAL RESEARCH GUILD

www.thenrg.org

SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS

CLUBS

Nautical Research & Model Ship Society of Chicago

Midwest Model Shipwrights

North Shore Deadeyes

The Society of Model Shipwrights

Butch O'Hare - IPMS

Posted
2 hours ago, JacquesCousteau said:

Very nice work on the pilot house. Sorry to hear about the medical issues, hope all goes well!

 Thank you, Jacques.

 

2 hours ago, Canute said:

You're both on my prayer list Keith. I'm in a similar boat with wife being the sick one right now. I'm under a watchful waiting period with my leaky aortic heat valve, too.

 Thank you, Ken. I'm praying for both you and your wife. How long has your aortic heart valve been leaking and are you going to have surgery?

 

46 minutes ago, kurtvd19 said:

Best wishes for a speedy recovery from Mary and me.

 Thank you, Kurt and please tell Mary "thank you". 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
51 minutes ago, tmj said:

Best wishes and prayers to ya Keith! 

 Thank you, Tom.

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

Hi Keith, I've been quietly following your build and enjoying watching all the details you have added. Sorry to hear about you issue, I hope all goes well and wish you a speedy recovery.

Bob

 

Current builds: Artesania Latina Cutty Sark, Myrtle Corey (scratch build)

Completed: Model Shipways Pinnance, Amati Hannah ship in a bottle, Blue Jacket America, Midwest Sakonnet

                     Midwest Fantail (R/C), Thunder Tiger Victoria (R/C), Victor Model V-12 Footy (R/C)

 

Member of the Model Shipwrights of Niagara

Posted
3 hours ago, berhard said:

Hi Keith, I've been quietly following your build and enjoying watching all the details you have added. Sorry to hear about you issue, I hope all goes well and wish you a speedy recovery.

 Thank you, Bob. 

 

2 hours ago, TBlack said:

Keith, dear brother, I’m going to read into the fact that the CT scan isn’t until 4/30 means we’ve got some swingin’ room. Stay positive. It’s the not knowing that’s the worst part. We’re all with you!

 Thank you, Tom. 

 

12 minutes ago, Jim Lad said:

Hang in there, Keith. remember, if it does come to surgery, the surgeons have had another five years' experience to make them even better!

 Thank you, John. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...