giampieroricci Posted March 6, 2015 Author #151 Posted March 6, 2015 I am happy that my work can serve to help you! Thank you! Quote
giampieroricci Posted March 7, 2015 Author #152 Posted March 7, 2015 Before fixing the dolphins I believe I must cover the hawse pipes with lead foil. For this, I thought of using the commonest fishing sinkers, long enough and suitably machined on a lathe to obtain a kind of tube: Reached the diameter must have stuck in power, tapping it with a hammer. the tube in hawses NMBROOK, WackoWolf, mtaylor and 3 others 6 Quote
giampieroricci Posted March 7, 2015 Author #153 Posted March 7, 2015 I cut the excess The final result; I'll probably still reduce thickness because it seems a bit 'too much, but I'll do it later, when I finish the walled inside starboard and adjusted the length of the lead lining. Dubz, hexnut, cabrapente and 10 others 13 Quote
druxey Posted March 7, 2015 #154 Posted March 7, 2015 Looks very nice, but you might wish to coat the lead with lacquer. This will prevent deterioration into lead salts from contact with air later on. mtaylor and dvm27 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
giampieroricci Posted March 8, 2015 Author #155 Posted March 8, 2015 Druxey you're right! Soon I'll have to paint the entire hull with matte varnish Quote
giampieroricci Posted March 8, 2015 Author #156 Posted March 8, 2015 I fixed the four dolphins: mikegerber, hexnut, tarbrush and 8 others 11 Quote
giampieroricci Posted March 12, 2015 Author #157 Posted March 12, 2015 I built the cushions of hawses popash42, NMBROOK, archjofo and 11 others 14 Quote
giampieroricci Posted March 15, 2015 Author #158 Posted March 15, 2015 I started working on the transom, probably the less successful because of some asymmetry that I hope, completing the work, it is not too obvious. Meanwhile, I trimmed the excesses of strakes: I built the two stretchers of the transom: And the crowning that supports these stretchers: From this picture I get the impression that the courses tend to rise slightly to the left, although it seems not live; mah! Archi, NMBROOK, druxey and 7 others 10 Quote
giampieroricci Posted March 16, 2015 Author #159 Posted March 16, 2015 Little progress; I completed the bandage transom: I have yet rifinirne contours which are abundant: mtaylor, Fam, AntonyUK and 7 others 10 Quote
mtaylor Posted March 17, 2015 #161 Posted March 17, 2015 Beautifully done. I love that stern. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted March 22, 2015 Author #162 Posted March 22, 2015 I have finished the nailing of the transom and I banded the inner part of the time of transom popash42, Jaekon Lee, WackoWolf and 5 others 8 Quote
giampieroricci Posted March 24, 2015 Author #163 Posted March 24, 2015 After several attempts came bad, I managed to make a window more acceptable; I do not know if I can, but I want to try to fix the two hinges to be able to open; will be very difficult to fix the hinges to the threshold ......... In the photos the window is stuck NMBROOK, Jason, PeteB and 5 others 8 Quote
giampieroricci Posted March 24, 2015 Author #164 Posted March 24, 2015 a few more photos: cabrapente, Jaekon Lee, NMBROOK and 12 others 15 Quote
giampieroricci Posted April 6, 2015 Author #165 Posted April 6, 2015 A little progress: EdT, mtaylor, jose_b and 8 others 11 Quote
giampieroricci Posted June 2, 2015 Author #166 Posted June 2, 2015 some progress on moldings Stern WackoWolf, popash42, PeteB and 6 others 9 Quote
giampieroricci Posted June 2, 2015 Author #167 Posted June 2, 2015 Other photos PeteB, mtaylor, piotras and 4 others 7 Quote
giampieroricci Posted June 2, 2015 Author #168 Posted June 2, 2015 more... mtaylor, tadheus, NMBROOK and 7 others 10 Quote
giampieroricci Posted June 13, 2015 Author #169 Posted June 13, 2015 some progress Tobias, WBlakeny, EdT and 11 others 13 1 Quote
Alex M Posted June 13, 2015 #170 Posted June 13, 2015 Nice progress, and very fine looking glazing, how do you doing them? Alex Quote Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire. On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth
giampieroricci Posted June 13, 2015 Author #171 Posted June 13, 2015 Hello Alex! manually, with some tools shaped from me made from old hacksaw blades PeteB, WBlakeny, cabrapente and 4 others 7 Quote
Alex M Posted June 13, 2015 #172 Posted June 13, 2015 Hello, very good hand work, Giampiero! But I have meant te window glazing in your last picture. It looks very authentic! Alex Quote Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire. On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth
giampieroricci Posted June 14, 2015 Author #173 Posted June 14, 2015 (edited) Oh! Sorry!!! With this: Synthaglass http://www.drtoffano.com/toffano_prodotti/pg_prodotti.htm Edited June 14, 2015 by giampieroricci Jorge Diaz O and mtaylor 2 Quote
giampieroricci Posted June 20, 2015 Author #174 Posted June 20, 2015 some progress: archjofo, albert, mtaylor and 6 others 9 Quote
giampieroricci Posted June 20, 2015 Author #175 Posted June 20, 2015 I started the construction of the gunwale, starting from the bow where must engage in the oarlocks. Everything is only hinted at plenty fat: it will be finished later WackoWolf, mtaylor, NMBROOK and 5 others 8 Quote
archjofo Posted June 20, 2015 #176 Posted June 20, 2015 Beautifully done! PeteB 1 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
giampieroricci Posted June 22, 2015 Author #177 Posted June 22, 2015 Thank you!! It's nothing compared to your job that I always follow with admiration!! WBlakeny, popash42, capnharv2 and 5 others 8 Quote
mtaylor Posted June 23, 2015 #178 Posted June 23, 2015 Very beautiful, Giampiero. wangshuoliurui 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted June 23, 2015 Author #179 Posted June 23, 2015 Good evening! Mirabell61, archjofo, popash42 and 15 others 18 Quote
Alex M Posted June 24, 2015 #180 Posted June 24, 2015 That is very crisp and clean work, Giampiero! Looks amazing! Alex PeteB 1 Quote Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire. On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.