Stuntflyer Posted March 10, 2015 Share #271 Posted March 10, 2015 Very nice Thomas! Your attention to detail is excellent as usual. Mike GLakie and Gahm 2 Quote Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
Gahm Posted March 10, 2015 Author Share #272 Posted March 10, 2015 George, CaptainSteve, Augie, Sal, Mike, thank you so much for your kind comments! And thanks for all the "likes"! Looking at my "speedy" progress with the carronades you probably won't hear from me anything else but "cannon talk" during the next few months. At this moment I am really happy that I am "only" building a 18 gun brig and not one of those big frigates (Augie, Rafine!) or a ship of the line. I cannot imagine what it would be like to assemble close to 100 cannons! Thomas egkb and GLakie 2 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
arnie59 Posted March 10, 2015 Share #273 Posted March 10, 2015 I just spent the last couple of hours reading through your log for the first time. Incredible attention to detail and impeccable execution! Gahm and GLakie 2 Quote Link to comment Share on other sites More sharing options...
Gahm Posted March 31, 2015 Author Share #274 Posted March 31, 2015 A little update. Things as usual are moving very slowly due to lack of modeling time (what’s new ? ). I finished the first 4 carronade carriages and the first “production” carronade (image 1). Images 2 a-d show the fabrication of the hinges for the gun barrels. For this I milled a grove into a brass strip and silver soldered a brass tube into the grove. The result is shown in image 2a. To cut hinges from this piece with always the same width I combined my Taig lathe and my rotary tool with flex shaft (in lack of a suitable table saw) to a metal cutting device (see images 2b and c). The resulting hinges are shown in image 2d. Image 3a and b present the method I used to determine the correct location of the hinges on the carronade carriage. I placed the gun barrel-hinge assembly on the carriage in such a way that the elevation screw was located correctly on the metal fitting and marked the front end of the hinges with masking tape. As a next step I placed the hinges alone nicely centered on the carriage, with the right distance between them and the front end aligned with the masking tape (image 3a). To help with this process I covered the carriage first with further masking tape and a double-sided sticky tape on top of the masking tape. Once aligned satisfactorily I marked the 2 front ends of the hinges on the masking tape, removed every tape with the exception of the tape with the alignment marks and mounted the hinges permanently using these marks (image 3b). Finally the gun barrel was mounted, the elevation adjusted with the elevation screw, and barrel and screw glued in place. The final result is displayed in images 4 and 5. Images 6 and 7 show the first carronade in its final place on my Syren model. Thomas Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 gerty, rafine, _SalD_ and 21 others 24 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
CaptainSteve Posted March 31, 2015 Share #275 Posted March 31, 2015 (edited) Oh !! My [iNSERT DEITY OF CHOICE HERE] !!!!! That is stunning !!! Edited March 31, 2015 by CaptainSteve GLakie, Gahm and Wintergreen 3 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve Link to comment Share on other sites More sharing options...
rafine Posted March 31, 2015 Share #276 Posted March 31, 2015 Thomas, all I can say is WOW. The carronades are fantastic. Bob Gahm and GLakie 2 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
GLakie Posted March 31, 2015 Share #277 Posted March 31, 2015 Those are some fantastic looking carronades Thomas! Amazing workmanship on them! Cheers Gahm 1 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
JesseLee Posted March 31, 2015 Share #278 Posted March 31, 2015 WOW! GLakie and Gahm 2 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle Link to comment Share on other sites More sharing options...
Mirabell61 Posted March 31, 2015 Share #279 Posted March 31, 2015 beautiful work Thomas, Nils GLakie and Gahm 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Stuntflyer Posted March 31, 2015 Share #280 Posted March 31, 2015 (edited) Well thought out and superbly executed. I second the WOW! Edited March 31, 2015 by Stuntflyer Gahm, JesseLee and GLakie 3 Quote Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
CaptMorgan Posted March 31, 2015 Share #281 Posted March 31, 2015 Unbelievable !!! A simple "like" can never do that kind of workmanship justice. Amazing. JesseLee, Gahm, GLakie and 1 other 4 Quote Till next time..... 😎 Steve Finished: Artesania Latina Constellation; Model Shipways USF Confederacy: Medway Longboat 1742 - Syren Ship Model Company Current Build: Syren's Winchelsea Link to comment Share on other sites More sharing options...
Gahm Posted April 1, 2015 Author Share #282 Posted April 1, 2015 Thank you so much for this enthusiastic feedback! It is much appreciated! And thanks for all the 'likes'. Thomas GLakie 1 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
augie Posted April 1, 2015 Share #283 Posted April 1, 2015 Sheer perfection! GLakie and Gahm 2 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
Gahm Posted April 2, 2015 Author Share #284 Posted April 2, 2015 Thank you, Augie! You made my day! Thomas GLakie 1 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
Gahm Posted May 23, 2015 Author Share #285 Posted May 23, 2015 A little sign of life: I finished the first 5 carronades – see images below. Unfortunately this time in the year there are always too many other projects that need to be taken care of. So right now I am following the philosophy of Confucius: ‘It does not matter how slowly you go as long as you do not stop’ Thomas , CaptMorgan, _SalD_, rafine and 17 others 20 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
_SalD_ Posted May 23, 2015 Share #286 Posted May 23, 2015 Thomas the carronades are stunning, beautiful work. GLakie and CaptainSteve 2 Quote Sal Nautical Research Guild Current USCG Harriet Lane - Model Shipways Complete U.S. Brig Syren - Model Shipways New York Pilot Boat 'Phantom' 1868 - Model Shipways Link to comment Share on other sites More sharing options...
GLakie Posted May 23, 2015 Share #287 Posted May 23, 2015 That's some lovely detail you've put into those carronades Thomas. Beautiful! augie and CaptainSteve 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
augie Posted May 23, 2015 Share #288 Posted May 23, 2015 Beautifully done ..... great color. GLakie and CaptainSteve 2 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
rafine Posted May 23, 2015 Share #289 Posted May 23, 2015 Beautiful -- at whatever speed you're working. Bob CaptainSteve and GLakie 2 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Gahm Posted May 24, 2015 Author Share #290 Posted May 24, 2015 Thank you so much for all your nice comments! And thank you for all the likes! Both are always highly appreciated! Building these carronades is a bit of a perseverance test as each of them has >60 parts and worst of all 29 holes which need to be drilled with a #80 drill and a pin vice through brass. So a little encouragement is very welcome Thomas rafine, Stuntflyer, JesseLee and 4 others 7 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
GLakie Posted May 24, 2015 Share #291 Posted May 24, 2015 Extra steps and work are obviously worth the effort Thomas, as the proof is in the end result. One that we all strive for. CaptainSteve and Gahm 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
dafi Posted June 1, 2015 Share #292 Posted June 1, 2015 Why?!? Why did this gem did escape my attention so far? Wonderfully build and thank you for showing so much of the "how to". Cheers and congratulations! DAniel CaptainSteve, GLakie, Gahm and 2 others 5 Quote To victory and beyond! http://modelshipworld.com/index.php?/topic/76-hms-victory-by-dafi-to-victory-and-beyond/ See also our german forum for Sailing Ship Modeling and History: http://www.segelschiffsmodellbau.com/ Finest etch parts for HMS Victory 1:100 (Heller Kit) and other useful bits. http://dafinismus.de/index_en.html Link to comment Share on other sites More sharing options...
Gahm Posted June 2, 2015 Author Share #293 Posted June 2, 2015 Thank you, Daniel! And thank you for all the likes! Thomas egkb and GLakie 2 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
Gahm Posted June 9, 2015 Author Share #294 Posted June 9, 2015 I treated myself to Chuck’s new serving machine. Not that I need to serve anything at the current point in my Syren build , but I always like to get acquainted with new techniques early on so that I don’t run into too many problems when I really need to apply these techniques later. During the last few months I had thought about a suitable design for my own serving machine. It is not really difficult to find good examples in the internet. However, when I looked at the amount of work, which would go into the design and the material, especially suitable gears, Chuck’s new ‘Serv-O-Matic’ kit along with the reasonable price tag quickly changed my mind. Images 1 and 2 show the content of the kit. As all of Chuck’s products the kit is high quality (solid Cherry wood) and easy to assemble – basically only the laser burn marks need to be removed (to have a nice looking machine) and the wood sealed with rub on poly (image 3). The end result is a beautiful, very sturdy, and nicely functioning serving machine (images 4, 5, 6). Image 7 shows the result of a test run with a thread, which was not really suited for serving, but was conveniently ‘available’. It may give a little idea what kind of results can be achieved with a little practice and the right serving thread. This was the 3rd time I bought products from Chuck’s Syren company. I know I am repeating what other fellow modelers have already written in their build blogs. But each time I ordered something I was amazed about the excellent service, the reasonable pricing, and above all the outstanding quality of the products. Thomas Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Chuck, rvchima, CaptainSteve and 9 others 12 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
rvchima Posted June 28, 2015 Share #295 Posted June 28, 2015 Wow, I wish that was available a couple of years ago! GLakie 1 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
Gahm Posted September 3, 2015 Author Share #296 Posted September 3, 2015 After several weeks of traveling and lots of other projects I finally resumed work on my Syren again. Nothing exciting - I just continued building the carronade sleds. So far I finished drilling the holes for all photo-edged sled parts and mounted them with the 0.4mm rivets from Scale Hardware on the sleds. Images 1 – 4 show the current status. Thomas Image 1 Image 2 Image 3 Image 4 Wintergreen, Gundorph, Dubz and 13 others 16 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
_SalD_ Posted September 3, 2015 Share #297 Posted September 3, 2015 Thomas, I thought about doing that but not for very long, nice work, keep it up. Gahm and GLakie 2 Quote Sal Nautical Research Guild Current USCG Harriet Lane - Model Shipways Complete U.S. Brig Syren - Model Shipways New York Pilot Boat 'Phantom' 1868 - Model Shipways Link to comment Share on other sites More sharing options...
Blue Ensign Posted September 3, 2015 Share #298 Posted September 3, 2015 Nice work on the Carronades Thomas, Syren is such an attractive model, and you certainly are doing her justice. B.E. augie, rafine, GLakie and 2 others 5 Quote Current Build: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-164-scale Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ finished 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ finished HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation. Link to comment Share on other sites More sharing options...
Gahm Posted September 26, 2015 Author Share #299 Posted September 26, 2015 A little update: I have finished all carronade sleds, which means they are now all equipped with wheels and breech rings. I also added the 22 eyebolts with split rings to the Syren deck. To transfer the correct positions from the plan to the model I used masking tape. The tape first was aligned on the plan parallel to the gratings and the positions were noted on the tape (the black contours on the plan nicely shine through the masking tape, see image 1). In a second step the tape with the marks was aligned parallel to the gratings on the Syren deck, the position marks fine adjusted, the holes drilled through the tape, and finally the tape removed (image 2). Images 3 – 6 show the current status of the model. Thomas Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 egkb, Dubz, Stuntflyer and 17 others 20 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864) Link to comment Share on other sites More sharing options...
GLakie Posted September 26, 2015 Share #300 Posted September 26, 2015 Nice work using the tape for alignment of the deck-rings Thomas. She's looking splendid! CaptainSteve, MD11pilot and Gahm 3 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.