Lettie G Howard by captainbob - FINISHED - 1:48 - POB - schooner

[Jim Lad]

Very nice looking hull, there, Bob!

 

John

[popeye the sailor]

nice progress Bob.......I as well like the bulwarks.   very well done 

[captainbob]

Russ, I was afraid that glue alone would not be strong enough to support the bulwarks.  So every fourth or fifth station goes down and is glued to the hull.

 

Michael, we’ll just have to see how it goes.  One builder said he painted deck furniture and cabins before gluing them to the deck.  So now we try painting before guling down the deck.  Is that the same or . . .  Oh well. We’ll see.

 

Yes, Jud, It will probably be a combination of sandpaper and scraping.  Little tiny scrapers to get into the tight corners.

 

John, and Popeye, thanks for the good words.

 

Bob

[Alfons]

Nice work Bob! I cant wait to see the result of your painting. What color do you plan for the deck?

 

/Alfons

[captainbob]

Thanks, Alfons, the admiral wants the hull black.  I said the underwater area would have to be the rusty red as I have on the other models.  She said I could try that first but I might have to repaint it black.  Admirals !  As for the deck it will be natural light colored wood, and the inside of the bulwarks will be white.

 

Bobh

[SGraham]

Beautiful work, Bob. That hull has lovely lines.

 

Steve

[Elia]

Bob,

 

Your Lettie looks super. The hull planking and fairing are very sharp. I love that hull shape. I look forward to the deck installation and hull painting.

 

Elia

[usedtosail]

Ah, she who must be obeyed. I know it will look great whatever color you end up with.

[popeye the sailor]

it's good to know that I'm not the only one who has to have their color schemes approved    watch out if she says something like :  "that one would look good in the blue room"  {and you don't have a blue room}.........there's a subliminal message there     can't wait to see what color you choose.

[captainbob]

Thanks Steve,  I just hope I can dress her in something just as lovely.

 

Yes Elia I’m looking forward to the hull painting and deck installation also.  I find it’s hard to work with my fingers crossed.

 

Tom, I’ve even taken to drinking wine like the old barrister.

 

The blue room, oh no not the blue room.  As you say I don’t have a blue room.   on the other hand is this blue  enough?

 

Bob

[shipmodel]

Hi Cap'n -

 

Just got around to reading through your log.  An hour very well spent.  I have seen the Lettie many times at South Street Seaport and sailing around New York harbor.  I always thought that she would make a really pretty model, and you are doing her the justice she deserves. 

 

I'm pulling up a chair and looking forward to seeing the painting and detail work.

 

Be well

 

Dan

[captainbob]

Glad to have you aboard, Dan.  There will probably be minor differences between the Lettie as she is now and the Lettie of 1900 that I hope to build.  But if I go too far astray feel free to let me know.  Learning from one another is how we get it right.

 

Bob

[Mirabell61]

very nice hull Bob,

 

with her slightly higher aft deck, the fine elegant lines she reminds me of the gloucester fisher boats, as well as the fast Pilot schooners of that time

in all great looking !

 

Nils

[captainbob]

Thanks Nils,

 

The Lettie was the last of the Fredonia model schooners out of Gloucester.  Thanks to you showing us how to build fine models, I hope to dress her well.

 

Bob

[captainbob]

Finally it’s painted.  Filler, sand, filler, sand and sand and sand, then paint, mask and more paint . . . finally.  Well here it is.    

 

Oh, yes.  I still need to add that gold stripe.

 

Bob

 

 

 

 

[russ]

The paint job looks very clean and crisp. A good paint job really takes some time. Nice work.

 

Russ

[maurino]

Very nice, Bob    !!!
Mauro

[michael mott]

Bob, the paint job looks very good it will be great to see the contrast with the deck planking. as you install it.

 

Michael

[captainbob]

Russ, Mauro, Michael,

 

Someday I will have to take painting classes to come up to what people see.  Thanks all.

Yes the deck is next.

 

Bob

[Senior ole salt]

That hull looks sweet Bob.   I like your plier rack.   the digital clock,   I could do without.

 

S.os

[kruginmi]

 A hull to be truly proud of.  Congratulations.  You have set a high standard for the rest of the ship!  -mark

[popeye the sailor]

nice job on the hull Bob.......the paint looks great!

[dgbot]

The Lottie has beautiful lines.  Nice paint job on a nice hull.

David B

[captainbob]

S.os, I agree with you about the clock, but at present . . .

 

Mark, thanks for the kind words.

 

Lawrence, I know about one boat at a time.  That’s the way I build also.  I’m sure the Annie will wait for you.

 

Thanks, Popeye the black paint help to mask the bad places.

 

David B, I agree.  It was the lines that grabbed my attention.

 

Now that I’ve said all that, I need to mess things up.  I just realized that I forgot the hawseholes.  There is extra wood above them and the drawings say they are bronze hawseholes.  Now let’s see, first I'll have to . . .  

 

Bob

[popeye the sailor]

see if you can find those eyelets  leather belts and stuff......they come in different sizes and metals

[captainbob]

Popeye, I wish that would work.  The hawsehole goes through the bulwarks almost parallel to the keel, so the outside shape will have to be an oval.  You can also see the wood that will have to be added above the hawsehole.

 

Bob

 

[michael mott]

Bob, if you drilled a hole the same diameter as some brass tube through a small piece of hardwood, then cut it trough to the shape of the hull at the bow, you could then file the brass tube to the same shape then anneal it and seat it back in the hole only sticking out a little bit. Next you could use the end of a piece of solid rod to shape the open end into an oval type eyelet. Just a though because I have to do the same thing and I though I could watch how you get on before doing mine;~) 

 

Michael

[Jim Lad]

Bob,

 

great job with the hull painting!

 

I use pretty much the same method as Michael - a hole to the diameter of a piece of brass tubing that can then be cut to the correct shape at each end and the outer rim filed nicely rounded to protrude from the hull.

 

John

[TBlack]

Bob,

I haven't checked in with you for a while, and I see you've made excellent progress. The hull looks beautiful! Up to your standards.

 

I had to make hawse holes for Vinal Haven. I decided to make just the outer lips which I fashioned to oval shape from styrene sheet. So, you need 4, 2 for each side. Drill a small hole in the styrene and enlarge with file, or knife to oval shape; then file the outside edge down to make the lip; stick it on the hull.

 

Tom

[captainbob]

Tom, I remember how you did that on the Vinal Haven and it turned out looking very good.

 

Michael, sounds like John did it first but he didn’t tell us which boat he did it on, and anyway I was hoping to follow your lead.

 

Bob