Pete Jaquith Posted July 3, 2020 Author #91 Posted July 3, 2020 Continuing the upper hull outfit, attention turned to fabrication and dry fitting of the bowsprit, bowsprit bitts, fore bitts, and the jibboom: Bowsprit assembly was completed. This is an interesting assembly with lots of fine period details. Jibboom fabrication was completed. Bowsprit bitts were fabricated from 3/32” sheet stock and 1/8” sq. stock. Bowsprit bitts were doweled to the inboard end of the bowsprit. Fore bitts were fabricated from 1/16” x 1/8” and 3/32” x 1/8” strip wood. Bowsprit and fore bitt deck attachments were reinforced with 3/64” dowel pins. The bowsprit notch was cut in the forward bulwark and the bowsprit, bowsprit bitts, and fore bitts were dry fitted to the hull. This step included a 3/32” extension to the stem to conform with the 3/32” added to the bulwark height to suit the cannon ports. After completing the above tasks, the knightheads and timberheads were installed on the forward bulwarks. To facilitate hull painting and inner bulwark attachments the catheads will be installed after hull painting; and, the bowsprit, bowsprit bitts, and fore bitts will be installed after fitting inner bulwark attachments and the cannons. The jibboom will be installed later during the rigging phase. Next steps will continue with construction of the cheek knees and head framing. jwvolz, etubino, druxey and 18 others 21 Quote Pete Jaquith Shipbuilder
captain_hook Posted July 3, 2020 #92 Posted July 3, 2020 Very nice and clean! Quote Current Build: HM Brig Badger 1/48 from Caldercraft plans Le Coureur 1/48 by CAF — Completed Build: Armed Virginia Sloop 1/48 by Model Shipways / Gallery HM Cutter Sherbourne 1/64 by Caldercraft / Gallery
ccoyle Posted July 3, 2020 #93 Posted July 3, 2020 4 minutes ago, captain_hook said: Very nice and clean! Pete's models always look immaculate. druxey and Ryland Craze 2 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Pete Jaquith Posted July 3, 2020 Author #94 Posted July 3, 2020 Thank you for your interest. This model was started in 2010 and was put in layup from 2012 thru 2018 while I pursued a series of full scale shipbuilding projects in the US and overseas. "Fair American" makes a beautiful model, and with time being available I opened it up and despite two moves (Hancock NH to San Diego CA to Indio CA) I found it in good shape. While working along, progress is limited by the following: My eyes are not what they used to be, now awaiting new glasses My shop temperature is good in the early morning (72-75 degrees F), but it raises to mid-80's in the afternoon (outside summer temperature 102 - 118 F). My attention span wain is limited after 3-4 hours work That said, I plan to keep working and I should be into hull paint and final exterior details in the coming weeks. pjofc4, captain_hook, druxey and 3 others 6 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 6, 2020 Author #95 Posted July 6, 2020 Period head framing - an interesting and challenging portion of this build. More to follow as I work through this portion of the build. Quote Pete Jaquith Shipbuilder
Rustyj Posted July 6, 2020 #96 Posted July 6, 2020 Hi Pete, Welcome back and it's great to see you building again! Nice work as always. Ryland Craze 1 Quote Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout
Pete Jaquith Posted July 7, 2020 Author #97 Posted July 7, 2020 Its good to be back in the shop and among friends hear at MSW. Progress is slow but the work is rewarding. Regards from the shipyard, Pete justsayrow 1 Quote Pete Jaquith Shipbuilder
justsayrow Posted July 7, 2020 #98 Posted July 7, 2020 38 minutes ago, Pete Jaquith said: Its good to be back in the shop and among friends hear at MSW. Progress is slow but the work is rewarding. Regards from the shipyard, Pete Great to have you back! Ryland Craze 1 Quote ==================================== Currently building: Model Expo AMERICA, A/L KING OF THE MISSISSIPPI Completed: Mamoli Victory cross-section, Revell LSM (Plastic, in memory of Dad), A/L SANSON tug, MS Longboat (awesome model Chuck!), Dumas 1949 Chris-Craft 19' Racing runabout, A/L SWIFT, MS ELSIE, Constructo ELIDIR (now LOUISE), Midwest Muscongus Bay Lobster Smack, Amati 1:80 Yacht ENDEAVOUR, Mamoli CONSTITUTION cross section, Revell VIIc U-boat (1:72 plastic), lotsa other plastic ships Next up: who knows - there are too many to choose from!
Ronald-V Posted July 8, 2020 #99 Posted July 8, 2020 Wonderful progress so far! Your build looks excellent Quote Currently working on the HMS Sphinx from Vanguard Models
Pete Jaquith Posted July 8, 2020 Author #100 Posted July 8, 2020 Thank you for your interest and support. Working through my Brig "Fair American" head framing. I think I have an approach worked out. More to follow when I complete this portion of the build. Ryland Craze 1 Quote Pete Jaquith Shipbuilder
Tim Murphy Posted July 9, 2020 #101 Posted July 9, 2020 Peter, you are greatly missed at the Newburyport club and also at the Constitution Guild. Your detail of build is unbeliveable. Tim Quote
Pete Jaquith Posted July 10, 2020 Author #102 Posted July 10, 2020 Tim, Its very good to hear from you. I miss all my good friends in the Newburyport and the Constitution Ship Model Guilds. Since I am working back into ship modeling I will try to keep up through MSW. I hope to finish "Fair American" 1st and then check out the status of "Newsboy" (crated since my move in 2013); we will see where is goes after these two builds. Please say hello to my many friends in Newburyport and Boston. Regards, Pete Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 10, 2020 Author #103 Posted July 10, 2020 With bowsprit fabrication complete; attention turned to the cheek knees and head framing. As this is a complex area, additional care was placed on its fabrication: Templates for the stem, head rails, and middle rails were prepared to assist in visualizing the arrangement. Figurehead was dry fitted to the stem (casting from the kit). Cheek knees were fabricated/installed from 1/16” and 1/8” sheet stock. Cheek knees were fabricated in 3 pieces with final shaping done in position. Next step, fabrication and initial installation of head framing and the remaining exterior outfit planned prior paint. Regards from the shipyard, Pete Jaquith Ryland Craze, JpR62, Rudolf and 9 others 12 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 13, 2020 Author #104 Posted July 13, 2020 I am working my way through lofting the head framing. This is a complex area with many curved pieces and dimensions that requires real study and evaluation. I have completed fabrication of the major pieces but installation and fine tuning still awaits. I will post a description and pictures at successful completion. Regards from the shipyard, Pete Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 17, 2020 Author #105 Posted July 17, 2020 With the cheek knees complete; attention turned to fabrication and installation of head framing and the remaining exterior outfit planned for installation prior paint: Head rails were fabricated/dry fitted. Head rails were fabricated from 3/32” laminated stock (3 layers of 1/32” sheet stock). Middle rails were fabricated/dry fitted from 1/16” sheet stock. Wire pins were used to reinforce the middle rail hull attachment. With the head and middle rails temporally pinned in place, the head rail knees were fabricated/installed in two pieces (to simplify fitting) from 1/16” sheet stock. Fore tack boomkins were fabricated/dry fitted from 1/8” sheet stock. Wire pins were used to reinforce the boomkin hull and head rail attachments. With the head framing defined, the hawse holes were located and drilled out. At his point, the transom trim was installed (photo etch from Lauck Street Shipyard). The head framing is one of the more complex portions of the build. Artistic license and patience were required for its construction. After hull paint, gold paint pens will be used to highlight its many intricate features. Final installation of the head rails, middle rails, and figurehead will follow hull painting. Final installation of the fore tack boomkins will await the rigging phase. Next step, exterior hull painting. Regards from the shipyard, Pete Jaquith John Cheevers, Ronald-V, davec and 14 others 17 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 21, 2020 Author #106 Posted July 21, 2020 A few more details added before we head to the paint shed: Rudder chain pad eyes were added to the counter and rudder post. Rudder chain final installation will follow completion of exterior hull outfit when the model can remain securely in its construction cradle (note that I may use larger chain next time). Quarter badge windows were framed with .03 sq. stock. The window frames were assembled on double sided tape and secured in place with CA glue. If you are familiar with the “Fair American” design, you may have noticed that I have taken certain liberties with the design and that I am free to add new details based on period practice. In other words, I look at ship modeling as an art and an opportunity for the builder to express his/her interpretation of how these historic period ships looked in their prime. I hope that you enjoy watching my 14 Gun Brig “Fair American” as it develops. Sorry for the picture quality. Next step, move to the paint shed for exterior hull painting. Regards from the shipyard, Pete Jaquith GrandpaPhil, Rudolf, John Cheevers and 10 others 13 Quote Pete Jaquith Shipbuilder
justsayrow Posted July 21, 2020 #107 Posted July 21, 2020 Pete, I look forward to your painting post(s). It’s the area I struggle most in, and yours is always so uniform and crisp. Ryland Craze 1 Quote ==================================== Currently building: Model Expo AMERICA, A/L KING OF THE MISSISSIPPI Completed: Mamoli Victory cross-section, Revell LSM (Plastic, in memory of Dad), A/L SANSON tug, MS Longboat (awesome model Chuck!), Dumas 1949 Chris-Craft 19' Racing runabout, A/L SWIFT, MS ELSIE, Constructo ELIDIR (now LOUISE), Midwest Muscongus Bay Lobster Smack, Amati 1:80 Yacht ENDEAVOUR, Mamoli CONSTITUTION cross section, Revell VIIc U-boat (1:72 plastic), lotsa other plastic ships Next up: who knows - there are too many to choose from!
Pete Jaquith Posted July 21, 2020 Author #108 Posted July 21, 2020 Will see how it goes. It is several years since I painted a model and this will require a lot of masking. Regards from the shipyard, Pete Jaquith justsayrow 1 Quote Pete Jaquith Shipbuilder
John Cheevers Posted July 21, 2020 #109 Posted July 21, 2020 Really enjoying following your build--very inspirational. Quote John Member: Hampton Roads Ship Model Society Current Builds: Tugboat Dorothy Newport News Shipbuilding Hull #1 (complete) Iron Clad Monitor (complete) Sardine Carrier which I will Name Mary Ann (complete) Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar) Harbor tug Susan Moran Coast Guard 100' patrol boat
Pete Jaquith Posted July 22, 2020 Author #110 Posted July 22, 2020 John, Thank you for your likes. Thinks are starting slowly as its been over 7 years since I put aside "Fair American" and "Newsboy" to support a series of full scale shipbuilding projects. Regards from the shipyard, Pete Ronald-V and Ryland Craze 2 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted July 26, 2020 Author #111 Posted July 26, 2020 "Fair American" is in the paint shed. Many coats/colors so it will be a few more days. Then many bits and pieces to be added. Pictures to follow. Regards from the shipyard, Pete GuntherMT, justsayrow and Ryland Craze 3 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted August 9, 2020 Author #112 Posted August 9, 2020 Status update: Painting nearing completion but I still have to add gold trim to transom moldings / carvings. Many pre-fabricated bitts and pieces to be added to complete exterior hull outfit. Regards from the shipyard, Pete rafine, justsayrow, Dwight and 11 others 14 Quote Pete Jaquith Shipbuilder
Tim Murphy Posted August 9, 2020 #113 Posted August 9, 2020 Pete, what a amazing model! Well up to you building standards! Tim Quote
Pete Jaquith Posted August 9, 2020 Author #114 Posted August 9, 2020 Tim, its good to hear from you. I hope things are going well. Regards from the shipyard, Pete Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted August 10, 2020 Author #115 Posted August 10, 2020 Milestone Achieved. With the Brig Fair American hull outfit well along, a major milestone was reached with completion of exterior hull painting. The following notes apply: Head rails, figurehead, catheads, gangway steps, chain plates & channel caps, gunport hinges, quarter badges, and rudder were left loose to facilitate masking and painting Paint was Model Expo Marine Acrylics (Hull Tallow, Hull Yellow Occre & Hull Spar Black) and Floquil Polly Scale (AT&SF Red) Masking was done with Tamiya masking tape Gold trim was done with Deco Color Prime-Premio gold metallic paint pens With a search on eBay I was able to purchase some Floquil Polly Scale AT&SF Red to match the previously painted inner bulwarks. While some paint touchup was required, I am pleased with the end result. Next steps will continue installation of exterior hull outfit starting with the rudder, rudder gudgeons, keel trim, and completion of the head structure. Regards from the shipyard, Pete Jaquith marktiedens, ccoyle, MEDDO and 7 others 10 Quote Pete Jaquith Shipbuilder
Ryland Craze Posted August 10, 2020 #116 Posted August 10, 2020 Very nice, clean and crisp. I look forward to seeing more. Quote Ryland Member - Hampton Roads Ship Model Society - Ship Model Society of New Jersey - Nautical Research Guild Current Build - Armed Virginia Sloop, 18th Century Longboat Completed Build - Medway Longboat
Pete Jaquith Posted August 10, 2020 Author #117 Posted August 10, 2020 Ryland, Thanks for the likes. Construction is moving along slowly but my eyes limit the detail. Regards from the shipyard, Pete Ryland Craze 1 Quote Pete Jaquith Shipbuilder
Pete Jaquith Posted August 11, 2020 Author #118 Posted August 11, 2020 With the Brig Fair American hull painting complete, construction continued with installation of lower hull outfit: Rudder was painted and installed Rudder gudgeons were fabricated and installed (strips of painted Bristol board) Keel and horseshoe plates were installed (from Syren Ship Model Company) Next steps will continue installation of exterior hull outfit with completion of the head structure. Regards from the shipyard, Pete Jaquith dvm27, Dwight, Rustyj and 6 others 9 Quote Pete Jaquith Shipbuilder
ccoyle Posted August 11, 2020 #119 Posted August 11, 2020 Pete, your models demonstrate just how much appeal can be added by a smooth, neat paint job -- really a treat to view. Ryland Craze 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Pete Jaquith Posted August 11, 2020 Author #120 Posted August 11, 2020 Chris, Thanks for your interest. She is starting to come together now. Many more bitts and pieces to be added to complete the exterior. Regards from the shipyard, Pete Ryland Craze 1 Quote Pete Jaquith Shipbuilder
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.