druxey Posted February 12, 2015 #91 Posted February 12, 2015 With the rabbeted edge rather than a bevel, how do you transition to the gain fore and aft, Lee? Looks like Lee Valley Tools got you! Very nicely done. AntonyUK 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
dgbot Posted February 12, 2015 #92 Posted February 12, 2015 I picked up a plane like the bottom one awhile back I think it is called a shoulder plane. Nice for getting into the edge. But I found out that for a smooth cut make sure the blade is sharp and take a light cut the end result is amazing. I got mine from Ebay. David B Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
Jaekon Lee Posted February 12, 2015 Author #93 Posted February 12, 2015 Thanks, Druxey and David. Druxy, the depth of rabbet is half of strake thickness but the depth was gradually increased to the full thickness of strake at the fore and aft ends for the carvel planking. Yes, the miniature tools are from Lee Valley made by Veritas. These miniature tools are useful especially for the light cut of miniature modeling work though longer time is required than power tools. Cheers, Lee Mirabell61, michael mott, Cap'n Rat Fink and 1 other 4 Quote
dgbot Posted February 12, 2015 #94 Posted February 12, 2015 Expensive but cheaper than a mill. Get some clot bags and put one per bag. Then a pouch of silion gel that you find in boxes to absorb the moisture and they can be safely stored until the next time or next week David B Canute, Jaekon Lee and Mirabell61 3 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
AntonyUK Posted February 12, 2015 #95 Posted February 12, 2015 Hello lee. That is exactly what I wanted to see. Perfect. This method is a nice example on how it's done. Thanks for the photos. Regards Antony. Jaekon Lee 1 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
Jaekon Lee Posted February 23, 2015 Author #96 Posted February 23, 2015 Port side hull and square tuck planking Cheers, Lee sonicmcdude, Cap'n Rat Fink, druxey and 20 others 23 Quote
AndrewNaylor Posted February 23, 2015 #97 Posted February 23, 2015 Some of the best I have seen, Beautiful work Thank you for sharing Andy Jaekon Lee 1 Quote Current Build HM Granado CC Past builds HMS Chatham CC, HM Convulsion CC, Duke William German Kit, Fair American LSS, The Wright Flyer MS
dgbot Posted February 23, 2015 #98 Posted February 23, 2015 Nice job of planking. Aren't you worried about the hull warping? David B Jaekon Lee 1 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
druxey Posted February 23, 2015 #99 Posted February 23, 2015 Very nice planking job there! Well done, Lee. Jaekon Lee 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
wyz Posted February 23, 2015 #100 Posted February 23, 2015 Lee, I love the planking job you did. it's very clean looking. Jaekon Lee 1 Quote
mcpwilk Posted February 23, 2015 #101 Posted February 23, 2015 Superbly done so far. Mike Jaekon Lee 1 Quote
Mirabell61 Posted February 23, 2015 #102 Posted February 23, 2015 congrats, you did it Lee, what a treat to see your port side planking in this beautiful way, you`re setting the mark..... Nils Jaekon Lee 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
AntonyUK Posted February 24, 2015 #103 Posted February 24, 2015 Hi Lee. Outstanding. Regards Antony. Jaekon Lee 1 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
captainbob Posted March 1, 2015 #104 Posted March 1, 2015 Just caught up with your build. Well done on the clinker planking. Beautiful job. Thanks for showing us how. Bob Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
Kurt Johnson Posted March 1, 2015 #105 Posted March 1, 2015 Lee, I really have to get one of those shoulder planes! Any advice, except for patience, patience and practice, practice! Kurt Quote Member: Ship Model Society of New Jersey
Jaekon Lee Posted March 2, 2015 Author #106 Posted March 2, 2015 Fore upper deck Hi, all friends. I'm very happy with your kind words and comments. Still I can not decide the method and material for bolting on hull planking, I moved to upper deck work as below. I'm not sure l can keep the carlings as well aligned with the progress of work. Regards. Lee albert, Canute, dgbot and 21 others 24 Quote
Mirabell61 Posted March 2, 2015 #107 Posted March 2, 2015 Beautiful work Lee, ist a pleasure to watch your work at this scale (1:64 !), clean and tidy work, I love it Nils Jaekon Lee 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Jaekon Lee Posted March 3, 2015 Author #108 Posted March 3, 2015 Thank you Nils for your compliment. There are some limitations in 1/64 scale to simulate fine details. I think 1/48 would be the best choice for the modeling. Cheers Quote
Kurt Johnson Posted March 3, 2015 #109 Posted March 3, 2015 Lee, How thick is the planking and how thin is their shoulder? Kurt Quote Member: Ship Model Society of New Jersey
Jaekon Lee Posted March 3, 2015 Author #110 Posted March 3, 2015 Hi, Kurt. Thickness of planking strake is about 1.5mm and the shoulder is rabbeted to half of thickness. Quote
Kurt Johnson Posted March 3, 2015 #111 Posted March 3, 2015 Lee, Thanks. That's twice as thick than I thought and obviously doable. I want to try it for the Sherbourne. I was thinking of 1/32 boxwood for planking but that would really be a feat., making a shoulder. I am sure there is someone out there who could, but it ain't me! 1/16 seems reasonable. Once done it could be sanded a little thinner. Now to Lee Valley, I really like those guys. Kurt Quote Member: Ship Model Society of New Jersey
Jaekon Lee Posted March 3, 2015 Author #112 Posted March 3, 2015 I agree with you, Kurt. If you have to use 1/32, consider beveled shoulder rather than rabbeting. Quote
michael mott Posted March 3, 2015 #113 Posted March 3, 2015 (edited) Lee checking in your build, beautiful work on the planking of the hull Michael Edited March 3, 2015 by michael mott Jaekon Lee 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Jaekon Lee Posted March 9, 2015 Author #114 Posted March 9, 2015 Compartment of fore bulkhead and pawl bitt pins Little progress on and below the fore upper deck. Pair of pawl bitt pins will support the bowsprit. Half of fore bulkhead and access door to boatswain's room were planked. For the starboard side, only the bulkhead stanchion structure was built. Cheers, Lee fatih79, tadheus, captainbob and 18 others 21 Quote
Mirabell61 Posted March 9, 2015 #115 Posted March 9, 2015 excellent work Lee, love those pics with the black blanket Background ........ Nils Jaekon Lee 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Jaekon Lee Posted March 10, 2015 Author #116 Posted March 10, 2015 Progress of deck Thank you Nils and friends as always. Deck beams were added one by one with related fittings. Up to now, 4th deck beam, carrick bitt pins, fore companion way and coaming have been installed. Standards for bitt pins and windrass spindle will be added after upper deck planking. Cheers, Lee algeciras1801, robin b, Jeronimo and 23 others 26 Quote
druxey Posted March 10, 2015 #117 Posted March 10, 2015 Making good progress, JKLee. Lovely work. Jaekon Lee 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
AntonyUK Posted March 10, 2015 #118 Posted March 10, 2015 Hello Lee. Looking superb and it's a delight to watch the model building up. Your photos are very good and clear. Nice work. Regards Antony. Jaekon Lee 1 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
Jim Lad Posted March 10, 2015 #119 Posted March 10, 2015 Just catching up, Lee. That's one impressive model you're building. John Jaekon Lee 1 Quote
fnick Posted March 11, 2015 #120 Posted March 11, 2015 Hi Lee This is one beautiful build. It was extremely encouraging to read that the only power tool you use is a mini drill. If you dont mind me asking what hand tools do you use? Nick Jaekon Lee 1 Quote Le Mirage by fnick - Corel - 1:75
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.