Jump to content

Recommended Posts

Thank you for your really nice and supporting words, my friends

Mainly, all goes well, just as I have planned.  As you probably remember, I made several serious mistakes at the beginning (lost hull and deck lines and position). On some way, I just do not know how, I succeed to eliminate those mistakes in outer view to my model, at least, I can not see them looking Her Majesty from outside

But in the main deck, situation is quite different, and deck railings are not parallel to deck. How works on the model are progressing, it seems that my decision to overload decks with hyper detailed parts - to visually mask mistakes, was a right one

For now, considering that aft and fore decks are almost done with all elements on their place, the most difficult constructive challenges on main deck are also done, so I can be quite relaxed, making remaining elements

Next picture present current state of works on main deck

 

now.thumb.jpg.45cff4fe46767e4d4274f244598e864d.jpg

So, my plan is to make them all, then to glue them all on their places, than to make tinny net fences on fore and aft deck railings

 

 1556438995_net1.thumb.JPG.f7d5781153e88aabfbd8d29c9a394663.JPG29921746_net2.jpg.0421f47d0c3ab3d73a3b741258654872.jpg

Then I plan to correct eventually colour mistakes, and then, finally to go to the next stage - masts and yards. Sure, there will be a grand dust cleaning works before Her Majesty moved to one of child rooms where is no dust

Having in mind the speed of my works, it will be almost OK if I reach that phase at the autumn this year

 

Again, thank you all for watching

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Nice progress Nenad,

love it that you`re making all those small fitting out details yourself... (a true scratch build) !

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

As you can see, Orthodox cristmas was on Sunday, april 27th, monday was holliday day, few days after two holliday days for may 1th, and begin with friday april 25th until tomorrow may 6th, I was on some kind of miny vacation. Even I want to work my regular job, I don`t have no client here, everybody connect this days and went somewhere. From some reasons, I was not planing to travell somewhere for couple of days, so, there was a plenty of time for Her Majesty, and works are progressing significantly

 

Next on list, to fullfil deck content, are different spare yards, boat masts, jards for studd-sails ...

Their number and position on the main deck and on deck  houses was reconstructed following Campbell plans and photos I collected all this years, and presented on drawing in upper post 

Material - barbeque bamboo sticks

For this purpose, to stand on deck or deck houses, making of them is easy. Just put bambo stick in dremell and use sandpaper.  Yards for sails will be considerably higher bite, having in mind all fittings and their construction

 

So, let it be

 

spare.thumb.jpg.03ba4afea844ae5f6ad4699d52545b06.jpg

 

 

Edited by NenadM

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

  • 1 month later...

On Julay 7th, there are exactly 6 years from starting this lazy building log ... a bit of shame on me ...

Yes, I am still here, with my day cutted of for additional 12 hours I need to do everything I need and want

Slowly approach to court hollidays, to my summer vacation, and I hope to find a time to continue to the stage of build which is most interesting (masts yards etc etc)

In men time, working, keeping my house in shape, garden works, take care of Rhea -  the home queen, doing some side projects (painting with acryl on canvas) and ... hehe ... spend some time with one beautiful lady ... as I said, 24h are veeeeery short

See you soon with some progress

All the best for you all

Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

LIfe sometimes take precedence, Nenad. Good to know you are still amongst us, although "divided". Hope your lady leaves you enough time for the intricacies of rigging

Take care

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

Sounds like your priorities are good ones, Nenad.  

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Link to comment
Share on other sites

been following your log, as my first trip into the dark side will be the Cutty Sark

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

On 7/9/2019 at 10:03 PM, Kevin said:

been following your log, as my first trip into the dark side will be the Cutty Sark

Wellcome Kevin!

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Main deck small content, next step done

IMG_20190714_182930.thumb.jpg.3550da9e5332e6cda3603f2b4ae542ad.jpg

IMG_20190714_183153.thumb.jpg.d8a62a829a1ca76936599413c8006896.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Short analytic what is next, to fullfill main deck and other decks with small content

Did I miss something?

1524309516_Beznaslova.jpg.a26102eb7c839ed109efdc72825bcbbd.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Great progress. You mentioned netting with a photo above, suspect the netting of today is for child and pet safety, there for insurance purposes. The railings and Bullworks should suffice for a working cargo ship and did not exist in her working years. Have admired your progress through one wreck after another with the model and your life, it has made you into a fine modeler with unique skills, patience and empathy for others, proud of you.

 

Link to comment
Share on other sites

18 hours ago, jud said:

Great progress. You mentioned netting with a photo above, suspect the netting of today is for child and pet safety, there for insurance purposes. The railings and Bullworks should suffice for a working cargo ship and did not exist in her working years. Have admired your progress through one wreck after another with the model and your life, it has made you into a fine modeler with unique skills, patience and empathy for others, proud of you.

 

Hey Jud

Thank you my friend for very kind words

He he … there is something as it is said ... "monkey see monkey do!" . There are so many interesting things in this world, which from time to time, almost continuously take my attention, so I have million of hobbies (modeling, guitar, painting, photography, writing and publishing short stories on FB, cooking, gardening, traveling, visiting old places, collecting and listening music, research history, reading books, visiting museums theaters opera ballet cinemas exhibitions concerts, etc. etc.) so my day is short for everything I want and everything I have to do for living, including my job, very close family relations particularly with Hothead and Princess, social life with many friends, and of course, my private emotional life …

So, Her Majesty has to be patient and to wait for me

About netting

I think I used unappropriated word. I agree that netting was not in use in Her working years.

But safety fence? There are some old photos where are fences on fore and aft deck are presented, also on Campbell`s plans

So, considering my deccission to make model designated only to stay in my living room, which will be some kind of mix between C-plans and photos of details at present day, combining with details from Lou`s photos, with all sails spreaded, this is it

Almost same story as ancient fortress here in Belgrade, named Kalemegdan fortress, which was destroyed and rebuilded more than 20 times in more than 2000 years of it`s history … where you can find remains of walls and structure from Roman empire time, midlle age time, Turkish time, etc etc. Onde day I was speaking with custos of museum and asked him -  why you do not reconstruct a whole fortress? And he said - And in wish period exactly to reconstruct? Same thing. To admit, I am not passioned in that way to research and reconstruct Her Majesty exactly to one period of her long life. I enjoy in working on Her, and I will enjoy in her look when she will be finished one day

Thanky you again for your very kind words and wishes

Nenad

 

 01.jpg.9816b3ebed5740810c958ab84ec3bdc0.jpg02.thumb.jpg.61079ddbc88040e886c3e31a9945343f.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Deck bollards

toothpick528690378_IMG_20190719_1348382.thumb.jpg.980e4227213d73768055fc4faf6f144b.jpg

 

IMG_20190719_134726.thumb.jpg.6636d14a3b52db9e8a3610148d9c826c.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

hello there Nenad!  finally I get to catch up on your log.   you've gotten a lot done......can't believe it's been that long since you started the model.   well, there is no such thing as rushing in this hobby........your right on track ;)   sorry to hear about Adrain..........he was around all who loved him.......it's the only real way to look at it.

 

looking fantastic as always..........the detail is superb! :) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

On 7/19/2019 at 4:54 PM, popeye the sailor said:

hello there Nenad!  finally I get to catch up on your log.   you've gotten a lot done......can't believe it's been that long since you started the model.   well, there is no such thing as rushing in this hobby........your right on track ;)   sorry to hear about Adrain..........he was around all who loved him.......it's the only real way to look at it.

 

looking fantastic as always..........the detail is superb! :) 

Thank you for kind words, Denis

Right now, considering that I am pretty close to mast/yards/sails/ropes stage, this speeds up me and runs to finish deck contents

So, here is a little step toward Boat Davits

Thinny and fragile, it seems ...

643510840_Beznaslova.thumb.jpg.050a41acb15a23bf65df1da39cd130b9.jpg

 

 

 

Edited by NenadM

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Just testing ...

 

Photo_1563713757902.thumb.jpg.79ec262a0da87101d7d60a3fed397027.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

All four, done!

 

IMG_20190724_194246.thumb.jpg.792ffff849fd4620bdd0f4a3507aa1cc.jpgIMG_20190724_194138.thumb.jpg.30e2f56a909f1b13f0fde26e6bbbc973.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Anchor davits, done

 

Cu wire, 1,5 and 0,5mm I found somewhere in garage

IMG_20190729_201448.thumb.jpg.3544f850b14ea1345110ce27a7782d21.jpg

Next step

 

IMG_20190729_203113.thumb.jpg.b358dc2c9c7cce835289722b244c883e.jpg

Detail

 

IMG_20190729_204930.thumb.jpg.ced94010945ea4b255771e1882e8af9c.jpg

Attached with CA glue

IMG_20190729_210435.thumb.jpg.aa0a361b75a92010b5a624d695178088.jpg

White acryl paint in 3 layers

 

IMG_20190729_211930.thumb.jpg.7108a5a95ad2b79755eb6d55f3daaca7.jpg

And finished

IMG_20190729_211959.thumb.jpg.f92f60dfbe1c1021a4f7866b88b341ef.jpg

 

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

You have become a master of the tiny parts.   Beautiful work.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

10 minutes ago, mtaylor said:

You have become a master of the tiny parts.   Beautiful work.

Thank you, my friend.

Just playing, and make stop on point where it become hard to see difference between real masterwork and optimal work

Ring holders, for example, can be made more precise and more clean, but it is only 1mm wide detail, so ... who could ever see that?

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

I don't recall, if you are aware,  but some of the images you posted are of the Ferreira... and when the Portuguese got a hold of the Cutty Sark they did some serious mods....like adding that access on the aft poop deck house by the helm.  (To name just one of many)

Are you going to model her with all the mods or are you staying true to her original configuration?

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

Just now, rwiederrich said:

I don't recall, if you are aware,  but some of the images you posted are of the Ferreira... and when the Portuguese got a hold of the Cutty Sark they did some serious mods....like adding that access on the aft poop deck house by the helm.  (To name just one of many)

Are you going to model her with all the mods or are you staying true to her original configuration?

 

Rob

Hello, Rob

Having in mind that I make Her for two reasons

1. To enjoy working on her

2. To put Her in my living room when finish

without any idea to show Her anywhere or to sell Her

I decided to combine elements from Campbell plans with present stage I see on photos, with some details from Lou's set of b/w photos

Also, considering several really big and important mistakes I wrote earlier in log, I found only way to get out from mud - to hyper detail Her, to mask my mistakes

I know it is not accurate approach, but this is it

I silently  follow all  your work with great attention!

Thank you for your interest

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

31 minutes ago, NenadM said:

Hello, Rob

Having in mind that I make Her for two reasons

1. To enjoy working on her

2. To put Her in my living room when finish

without any idea to show Her anywhere or to sell Her

I decided to combine elements from Campbell plans with present stage I see on photos, with some details from Lou's set of b/w photos

Also, considering several really big and important mistakes I wrote earlier in log, I found only way to get out from mud - to hyper detail Her, to mask my mistakes

I know it is not accurate approach, but this is it

I silently  follow all  your work with great attention!

Thank you for your interest

 

I was with you when you began this log...you've overcome many obstacles and recovered very well.  It is very rewarding to know you are building her for your own personal enjoyment...that is the most important thing.  Keep up the great work.

 

Thanks for your fine comments as well.

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

Rail Bollards

3x9mm

:)

1894035147_Screenshot_20190802-1206082.thumb.png.c81181eb466de3ac37c19ed5e75bea36.pngIMG_20190802_120228.thumb.jpg.be4217a8fb85f7ccb7cf4a4d1a0dfa63.jpg331100303_IMG_20190802_1201312.thumb.jpg.0c2a1c93f67e798c9ec6af44d7f4cc52.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

And Rail Winches x4

 

Lou's detailed photo579225914_Screenshot_20190802-1945172.thumb.png.9ff7255d2dcb9a3e939e643baf58a9d7.png

IMG_20190802_192450.thumb.jpg.b52919802c7782391bae514bbf4b34f9.jpg

IMG_20190802_194056.thumb.jpg.71794619e26c7ada01c8a4851528cecf.jpg

IMG_20190802_194847_560.jpg.33ddc1f4b062aa77fd63419f4441cf47.jpg

Body is made from BQ stiks, holder from Cu foil

I was too much ambitious wishing to add some more details, until I saw how small it is

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

You have become a master of tiny parts.  My eyes cross just thinking of doing something that small and that well.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...