-
Posts
5,834 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Canute
-
Coming along nicely. The interior of the stack question got me thinking it may be due to the fuel burned, anthracite or hard coal. Had different characteristics from the soft coal used. The Lackawanna used hard coal from the NE PA area. They used Miss Phoebe Snow, a lady dressed in white, to advertise traveling on the railroad. If you've ever rode behind a steam engine with car windows open, you'll get dusted with ash from the burned coal. This didn't happen on the Lackawanna until WW I, when the Navy requested as much hard coal as was available to use in their ships, since another characteristic of hard coal was much less smoke. I suspect less residue in the flue gases, so less buildup. I'm a little out of practice with this info, since it's been over 50 years from my engineering college studies.
-
F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale
Canute replied to Egilman's topic in Non-ship/categorised builds
It does seem to take multiple coats to build up. It dries, but it's soft. Then again, most of these putties are like that. -
F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale
Canute replied to Egilman's topic in Non-ship/categorised builds
Nice mod. And the gun panels look close to boresighted. -
F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale
Canute replied to Egilman's topic in Non-ship/categorised builds
Yeah, the Bondo gets applied outdoors. I've tried the Vallejo putty; I'm not convinced yet. -
F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale
Canute replied to Egilman's topic in Non-ship/categorised builds
Bondo spot putty and masking tape can be a friend.😄 -
F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale
Canute replied to Egilman's topic in Non-ship/categorised builds
Agree on the replacements. The kit ones look like they're firing off to the sides, vice being bore-sighted to the flight-path. And like Dan said, they're a noticeably different shade from the fuselage sides. -
Same for me with drawing. I can give a sketch to a friend of mine with a laser cutter for special pieces/ parts. And that's a rubber room for that straitjacket, Carl. White room is a super clean space, which ain't gonna happen either. It's a basement. Floor is dark, hides dirt. Also hides anything dark, like many model parts.
- 203 replies
-
- Roma
- Micromaster
- (and 4 more)
-
Yes, sir. It's just as easy to launch a 3D part as a PE one. I need to do my work in a white room, so when a part goes pinging off into the next dimension, I stand a chance of quickly finding the pieces/part. Luckily,of late, it's been a tad easier, since the basswood & styrene shapes I'm working with are light colored.
- 203 replies
-
- Roma
- Micromaster
- (and 4 more)
-
I'll second that book recommendation. Excellent read.
-
Russian T-62A Tank by CDW - Tamiya - 1/35 Scale FINISHED
Canute replied to CDW's topic in Non-ship/categorised builds
Some could be water, Lou. Our guys carry 2 sets of Jerry cans, color coded for fuel or water. I think I fired a few Maverick air to ground missiles at a few of those, during some live fire exercises we flew in. -
Steamboats and other rivercraft - general discussion
Canute replied to Cathead's topic in Nautical/Naval History
Very cool discovery.- 281 replies
-
- Steamboats
- riverboats
-
(and 3 more)
Tagged with:
-
M3 Lee Tank by CDW - Miniart - 1:35 Scale - FINISHED
Canute replied to CDW's topic in Non-ship/categorised builds
Quite the range. I see many that will be of use. looking forward to your comments on use.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.