Jump to content
New Publication - Ship Modeler's Handbook - Get Your Copy Now!! ×

ccoyle

Moderators
 View Profile  See their activity

  • Posts

    9,764

  • Joined

  • Last visited

 Content Type 

Everything posted by ccoyle

  1. ccoyle
    Welcome, Nic -- I look forward to seeing your work.
  2. ccoyle
    Welcome aboard, Bill!
  3. ccoyle
    Just a heads up -- as you know, the frame extensions are notched on the inboard side. Those notches indicate the placement of the inner bulwark planking. The inner and outer bulwark planking should be the same height; if you have extensions extending significantly higher than the outboard planks, you'll probably run into some fit problems with the inboard planks.
  4. ccoyle
    Aw, man ... 😥.
  5. ccoyle
    Got the various bits of the bow in place. This completes the basic hull structure. @Chuck Seiler The ladder turned out to be too wide to fit its spot. I had to disassemble it and trim about 1 mm from each step. I glued the sides in first and added the rungs afterward. Next task is to fabricate and hang the rudder.
  6. ccoyle
    There are a lot of photos of modern schooners under sail, e.g. Pride of Baltimore II, Californian, etc., that can be found online -- great way to see how they set their sails in various wind conditions.
  7. ccoyle
    Ah, I see. I've seen a lot of unflattering comments about the wooden tiles, but I don't think that they would look all that bad if given an appropriate finish. Gotta hand it to you for perseverance, though, doing both the tiles and tape -- whew!
  8. ccoyle
    Perhaps I overlooked it in your Bellona log, but have you discussed the quality of Corel materials? In my very limited experience with them, it has seemed to me that their kit quality is somewhat directly related to kit expense, i.e. more expensive kits have better materials, and reviews of Corel's flagship model kits usually comment on the good materials found in them. Bellona certainly looked very nice, so I'm wondering if you have made any similar observations.
  9. ccoyle
    Welcome! You are off to a fine start. I have moved your log into the new 1801-1850 era build logs section. Cheers!
  10. ccoyle
    Congratulations! She looks great, too!
  11. ccoyle
    That's sage advice for any modeler and helps prevent the accumulation of projects that later never get built.
  12. ccoyle
    I missed the finish of this one, and I also offer congratulations. It is a very fine finished model! Cheers!
  13. ccoyle
    Very striking results to this point!
  14. ccoyle
    Interesting -- I have often heard the green wooden tiles spoken of, but haven't ever seen them being used. It will be interesting to see how the finished task looks. Cheers!
  15. ccoyle
    Hey, Joshua. I had the 1/700 scale Mogami way back in the day -- like 1982, if memory serves. I believe it was the last plastic kit I ever worked on. Never finished it, sadly. I look forward to seeing yours come together.
  16. ccoyle
    I can't speak to their instructions, but Modellers Shipyard kits have been generally well received. We currently have sixteen build logs on hand for various Modellers Shipyard kits, which you can check out by clicking here.
  17. ccoyle
    Welcome, Dale, from a NorCal ex-pat. The AVS is a well-regarded kit and is often suggested for beginners since it has minimal rigging and armament. As you have learned, even a "beginner" kit has sufficient challenges for s first-time builder. I hope your renewed enthusiasm will get you past any mental roadblocks on your project. Be sure to start a build log! BTW, depending on your whereabouts, there are at least three very good local ship modeling clubs in California: South Bay Model Shipwrights (Bay Area), Ship Modelers Association (Fullerton), and San Diego Ship Modelers Guild.
  18. ccoyle
    Hello, Olya. That is a very nice paint job! This kit is one of the last kits that Ben Lankford designed for Model Shipways -- he was highly regarded for his contributions to the hobby of model ship building.
  19. ccoyle
    It's all relative. As far as I'm concerned, once you're in, you're in.
  20. ccoyle
    Ouch! Sorry to hear about that. Hope everything goes well for you moving forward.
  21. ccoyle
    Hello, John. Most general wooden ship modeling books include material on rigging gun tackles. Local libraries often have these in their catalog. Cheers!
  22. ccoyle
    Well, that's got to be slightly embarrassing for OcCre!
  23. ccoyle
    Further progress. I'll call this first shot a pic of the "kinda looks like a windlass thingy," even though I know it's not a windlass. Bit more of the interior bow framing added as well. Heads up @Chuck Seiler: That pseudo-windlass thingy took quite a bit of fitting to get it in there right. I had to remove some material on the starboard side. And I also got the port-side interior bulwark planking done. When I originally did the outer planking, I was a little worried, because they didn't have much in the way of gluing surfaces. But once all of the interior framing and planking is added, the hull is actually quite sturdy. Onward!
  24. ccoyle
    Hey, hey now!! I don't "despise change." Well, at least not all of it. Okay, maybe most of it. 😋
  25. ccoyle
    Strange. I recall seeing part #132 in my instructions -- might be something they caught when they rolled out the new kit. As you are probably well aware, card kit instructions are notorious for the occasional omission or lack of clarity. Learning to work around these is an acquired skill!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...