ccoyle
-
Posts
9,526 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by ccoyle
-
Welcome aboard!
-
Well, after all that doom-and-gloom reaction last night, I think I hit on a solution that will work. First I took a short break to finish off the cockpit canopy rails. Then, moving on to the aft fuselage skin, I cut a slit from the forward edge back to one of the small boxes printed on the spine. There I cut in two small perpendicular slits, creating two flaps. The two flaps can now spread apart when the skin is added to the cockpit section, forming a dart that will need to be filled in with scrap card. I will add a joiner strip between the two sides, so that the dart will have some subsurface to adhere to. There will be a visible repair after the job is finished, but at least I won't have to round-file the entire project -- yet. Cheers!
- 126 replies
-
- 15
-
-
Ironically, I was actually planning to have the canopy closed on this model. I have one idea left to try on this train wreck before I throw in the towel. We'll see how it goes.
-
Well, my friends, it looks like this will be yet another well and truly screwed attempt at building a Halinski model. As you can see in the photo, in spite of all my best efforts to anticipate tight fits and sand the frames accordingly, there is still a nearly 2 mm height difference between the aft cockpit and the upper fuselage skin of the next section. No amount of gentle shaping has been able to coax that skin into place, and the joiner strips on the cockpit are degrading with the effort. Maybe I should just learn my lesson and leave the Halinski kits to the Poles, who alone among the peoples of the earth seem capable of regularly completing them. After all, I only have like 22 left.🙄 This is just so, sooooo frustrating and depressing -- makes me feel like the rankest amateur all over again.😑
- 126 replies
-
- 16
-
-
-
Welcome aboard, Louise!
-
Congratulations on completing the set! They look good together.
-
The next fuselage section is ready to attach. You may notice that it is not actually attached in this photo. That's because the two sections have an incredibly tight fit. I'm not even 100% certain that I can get them to go together. But I decided to wait until the next session before working further on this conundrum. (BTW, I have been sanding down all of the bulkheads in anticipation of just such fit issues as this. It hasn't gone quite to plan. Also BTW, that's not a tear in the aft section -- it's a cut where part of the piece folds down to create part of the cockpit canopy slide rail.)
- 126 replies
-
- 17
-
-
I can think of many things that are more "fun" than doing rigging in 1/250 scale -- like licking a cactus, prepping for a colonoscopy, or being forced to sit through a Hallmark Channel Christmas movie marathon. 😜
-
If you go back to the photo of my new shelving, you'll notice that all of my models are angled to starboard.
-
Hey, @Shipyard sid. The photo links in this build log are all broken. Any possibility of getting them fixed?
-
Welcome aboard!
-
So, here is the forward fuselage glued together, along with the patch of the "hideous seam." It is really hard, for me at least, to get a close match for four-color offset printing -- tinted paint just can't replicate exactly the tone and saturation of all the variously colored dots of a printed part. This is about the best I could do, and the result doesn't look too terrible to my eye. It looks worst when viewed straight on, as in this shot, and looks less obvious at other angles.
- 126 replies
-
- 16
-
-
Welcome aboard!
-
P-51D Mustang by CDW - FINISHED - Dragon - 1:32 Scale
ccoyle replied to CDW's topic in Non-ship/categorised builds
I don't build "cars model", but If my granddaughter bought me something like that, you bet I'd find a place to prominently display it! -
Welcome aboard!
-
P-51D Mustang by CDW - FINISHED - Dragon - 1:32 Scale
ccoyle replied to CDW's topic in Non-ship/categorised builds
Hmm . . . card publishers and plastic kit manufacturers seem to have an affinity for the same subjects.
- 122 replies
-
- 12
-
-
-
That's actually quite common in kits these days. The big problem, though, for this particular aircraft is the feathered edges between the brown and green areas of camouflage. Such edges are difficult to replicate neatly. But for this particular seam (and whatever others may result from my misalignment mishap), I'm determined to put it out of mind until I'm ready to attach the forward fuselage. No sense fretting about it before I get there.
- 126 replies
-
- 11
-
Our Emblem ®
