Jump to content
New Publication - Ship Modeler's Handbook - This Opportunity Will Soon Be Over - Order Now!! ×

Tigersteve

Members
 View Profile  See their activity

  • Posts

    1,313

  • Joined

  • Last visited

 Content Type 

Everything posted by Tigersteve

  1. Tigersteve
    Fantastic! Steve
  2. Tigersteve
    Congrats! It looks great. I think you made a good choice for your next. Karl and Andy are both doing great logs on the Pride of Baltimore. Steve
  3. Tigersteve
    Looks great! Best Niagra on the block. Lol I know those are clove hitches for the ratlines, but what type of knot did you tie at the end of them? I'm not sure if my question is clear. Steve
  4. Tigersteve
    It was at this point in the build that I was going to switch to the Pinnace and come back to this later, but I have changed directions. I will display them separately. I made a small modification to the rudder (can you tell what it is?). Here are photos of where it stands. Masting and rigging is next! Steve
  5. Tigersteve
    Spent the week working on the oars. I did this in a few stages. First I drew a line down the center so I could taper the blades. I used a sanding block to round off the corners then switched to a folded piece of sandpaper to finish rounding the edges. I thinned everything down as close to the plans as possible so the proportions would look correct. I tried a different color scheme than I've seen in other logs. The photo shows several coats of paint and WOP applied. I could not capture a great photo. Steve
  6. Tigersteve
    Nicely done, Erik, as always. Good strategy and I think the pacing is good! Steve
  7. Tigersteve
    Looks good. I like the paint scheme you will use. I don't like the white dots on the thwarts. No clue why they are there. Sorry can't help with that one. Steve
  8. Tigersteve
    Oops! lol
  9. Tigersteve
    Second that! Nice color choice. Steve
  10. Tigersteve
    It's looking good! The smalllest size of the stain is 8oz about $5 each. Pre stain $12 + wipe on poly satin $12. Looking at roughly $30 for these minwax products. I recommend the WOP over the polycrylic. (I've tried both and the Polycrylic has more of a shine to it). If you decide to go this route. Steve
  11. Tigersteve
    Coming along nicely, Andrew. Steve
  12. Tigersteve
    Painting skills- check! Nicely done. Steve
  13. Tigersteve
    Yes and I think it's a better choice than the Phantom, which he also has a practicum. The phantom is nice, but it's very small and I think you will learn more in this kit with all the detail and rigging. Look forward to your updates. Steve
  14. Tigersteve
    Looks like a clean start to me. You may find yourself caring about the outcome of this build before you know it! I think you will learn a lot from Chuck's practicum. His are all very good. Steve
  15. Tigersteve
    Completed rudder. Steve
  16. Tigersteve
    Just went through your log. Inspiring work. Nicely done! Steve
  17. Tigersteve
    I thought I'd post an "intermission" photo of my workshop. It's a small operation. Steve
  18. Tigersteve
    In the second round of installing the oarlocks, I used a straight edge to draw a line roughly in the center of the caprail in the locations where the oarlocks would be placed. I then used a small file to draw two equally spaced perpendicular lines. This method worked much better for me. Not perfect but I'm getting used to drilling these tiny holes! Repainting the caprail was not fun. I wanted to see how Minwax Polycrylic(water based) satin would look over the paint job. I think it provided a little more sheen than the Minwax WOP. It certainly dries quicker and no time to buff to dull the shine. It's a little more shine than I want, but I think I may accept it, as the idea of painting it again is exhausting. The rudder setup is just about done. The tiller has been shaped and stained. I will install on the next updates. I think I'll work on the oars next. Steve
  19. Tigersteve
    It's getting there. Eventually it will just come together. Keep working on it until you're happy. Steve
  20. Tigersteve
    Bob- thank you. It looks great. I have to stop fiddling with the oarlocks on mine so I can move forward!! Steve
  21. Tigersteve
    Nice work. I'll follow along. Steve
  22. Tigersteve
    Wow- painting already! Seems like you just started on this project. Awesome! Steve
  23. Tigersteve
    Samueljr added sails to his: http://modelshipworld.com/index.php/topic/4559-18th-century-longboat-by-samueljr-finished/?fromsearch=1 Steve
  24. Tigersteve
    I can't wait to see what you decide. I think if you wanted to you could finely sand the layers of WOP off and still stain. So don't rule that out if you had it in mind. Test it on scrap first, of course. Not an expert, but I'm learning about these minwax products as I go. Really enjoying your build. Steve
  25. Tigersteve
    It's looking really good. She'll look nice with the Mayflower. I will have to get a curling iron now. Lol Steve

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...