svein erik

Am back 

and am nearly dunn with the stern  fraim, some more sanding needs

am working now on sanding the hull 

Svein.erik

Am jumping know back to chapter four  to do the stern framing 

and in 2-3 days I think its finished 

it wil be lined up propper and all the laser cut char wil be removed later wen the stern frame is strong 

Svein erik

Hi 

I did some work on the mast, wel I ned to beginn from there 

yust to get the wirering clare and to make it work at this time 

I drill some holes in the mast and carved out some wood under the ceeks for the cabels and I wil conekt them 

the pico wil be conekted into a lantern later

Svein.erik

Thanks for the liks and the info el cid

I diddent find anyting about lights on the syren so I made up my mind to make 5

one down below, one in a lantern monted in he hull were the ladder is ( port 4/5), 1 in ech mast monted in a lantern, and 

one if I can pull it off , a capt.figure holding a lantern in historie hand

if is historic correkt ??? but ider way I think is going to look grat and it wil be seen from the sea😉

Svein.erik

Am dunn the rest off blokking after the wirering 

shaping the hull is underway but need to get the stern fraim finish before the final shape 

Svein.erik 

Thanks for the liks and the info el cid

I diddent find anyting about lights on the syren so I made up my mind to make 5

one down below, one in a lantern monted in he hull were the ladder is ( port 4/5), 1 in ech mast monted in a lantern, and 

one if I can pull it off , a capt.figure holding a lantern in historie hand

if is historic correkt ??? but ider way I think is going to look grat and it wil be seen from the sea😉

Svein.erik

So, here are the lighting istallation 

all the wire is on board and I have montet brass tube fore montig the model later on the board, 

the wire goes true one of the tube and wil go under the finish board

this board will have a lager brass tube so the model will be sett down to.

the lights work well and next is to blokk up the hole frame, sett away the pico leds for future monting 

Svein.erik

Hi here to😄

a little update,  have got my cabel wire 

and I wil Soon wrap this inn the syrens hull for the lights

Im posting photo wen this is dunn

Hi again 

dunn some progress on the interior and working now to get the 10 next guns on board 

am getting there step by step, but its know slowing down 😱

Hi John and welcome on board the syren Journey , I have started on mine but still working on confederesy build 

Soon I get back to the syren build 

Svein.e

Hi Chris 

am working also on confederesy but the kit,

your's look like a Da-vinci painting, grait Job

Svein.e

Is look fantastic and am wait ing for the kit to Come on sale.

wile I was looking on some photo I have I did take som of the royal barge of Dutsh kingdom. (Amsterdam museum)

it has been restord and it have some grait ditales 

Svein.erik

Hi

well I did have the same problem but I did by guns and carriages from syren 

and ........ it diddent work, the New gun carriages was a bit to large for the gun ports wat I did was using the kit provideo carriages and syrens guns

it works well for me

Svein.erik

Hi

and welcome to the syrens club

i also got the bad plywood so I contacted M.E and got a replacements frame 

I think its Because of saving product cost  that M.E  at newer time provide the kit with bad plywood 

its not a good ting to do with a grait kit designed by Chuck 

Svein erik

Comming nicly to toghether, good builds 

Svein.e

Hi , am doing the guns and its a good start at my skill level but am learning as fast as I can 😲

here is mulig latest update 

Svein.erik

Exelent and perfect work , congrats 

Svein.e

If you want to replace the corronades you can get them from cadlecraft, 

but do use the 18 punds corronades they are match to the plaNS

Svein.erik

Good luck on your syren build 

am started on my syren to😊

Svein.erik

Am back on building the confederesy 

Dunn the rudder and need to finish the preventer chains and some other stuff to😱

test fitting a gun , damm this work is small😨 but I get ther sometime 

getting started to make the guns 

Take care

Svein erik

You can use the search on the right top corner

there are some builds, us brig niagara

Svein.e

Hello 

am about to planing the lights for syren and am going for 5 pico 

I wil also try to make oil lamp for a figur to hold 😓 well if I can??

Am not using the cabel on the photo, it to big so am ordering some New for that.

with some other stuff😆if my wife let me🙊

Hi Harley

nice build on your syren😊

When I deside to go for modelships building I was thinking about wat kit to start on 

this was not simple, so after a wile I deside to go for the usf confederesy 

as large as se is  I think it may be the dummes best ting I did

I learn many things by building this and some demolition 🙈

but thats ok, learning the hard way ore learning by doing😲

but am going to take this experience in wen building the brig syren, but the hardest ting for me wil be the rigging on the syren, but thats Comes later😱

Svein.e 

Thanks  for the likes and comments 

I finish the frame for gun ports and sweep  ports , I need to fair the hull more outside and inside 

next on the list is to do the stern fraim, 

Hi, thanks

I wil use small pico led for the lights whid remote control  

Am making some oil lamps that the pico goes in to.

the cabels I wil putt inside the hull and will go true the keel.

Then it remain to get this dunn 😲