GrandpaPhil
-
Posts
5,688 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by GrandpaPhil
-
Thank you very much! I’m debating how I want to make the mouldings, carve from 1/16” stock, or make them from card like I did on the bow? I am leaning towards the card at this point.
-
Congratulations! Well done!
-
And it’s a Baltimore Clipper, which is a great rig to learn on.
-
I am installing the iron banding that go with the channel eye bolts. I am making them from poster board.
-
Starboard side is done.
-
Thank you all for the likes and the comments! I have channels on the port side! The rest are painted and almost ready to install. I am pinning them to the hull. This means that I am using steel pins (sewing pins) to reinforce the glue so the channels do not buckle under the stress of rigging.
-
Cutty Sark by Cuda1949
GrandpaPhil replied to Cuda1949's topic in - Build logs for subjects built 1851 - 1900
It’s a matter of personal taste. I like carving. I didn’t know that I did until I tried it. Many people like sculpting. I have heard that sculpey is really easy to work and has minimal shrinkage when baking. I have the tools and the sculpey, but I haven’t tried using them. I am going to try it out on my next model. Either way, at worst you are only out a little bit of time and material if the first attempt doesn’t come out right. If you’ve never tried carving, I would encourage using the learn to carve tutorial here. It helped me tremendously. -
Your Granado is coming along nicely! I’m sorry to hear about your Christmas plans, but it is good to hear that you and yours are safe.
- 421 replies
-
- 1
-
-
- caldercraft
- granado
- (and 1 more)
-
Well done on the carvings! Your Soleil Royal is coming out beautifully!
- 2,607 replies
-
- 3
-
-
- heller
- soleil royal
- (and 9 more)
-
Welcome! Sounds like an awesome project!
-
I have channels with eyebolts. I made the eyebolts from annealed steel wire.
-
Welcome!
-
Well done!
-
Awesome!
-
Welcome!
-
Congratulations! Well done!
-
Port side channels are cut out: Time to make some eyebolts and do some painting.
-
Thank you everyone for all the likes! I’m glad you like the build! I finished cutting out the starboard channels. I still need to drill holes for the eyebolts and they all need painted prior to installation, but I have them sitting in their approximate spots so I can check fit and that they won’t interfere with the gunports. They will be pinned in place, in addition to being glued, for strength.
-
Monfeld’s book is my go-to reference book. I’m on my third copy of it.
-
Welcome and well done!
Our Emblem ®
