Jump to content

Knocklouder

NRG Member
 View Profile  See their activity

  • Posts

    1,951

  • Joined

  • Last visited

 Content Type 

Everything posted by Knocklouder

  1. Knocklouder
    Hello guys, on page 6 of my book it says to remove the bulkhead tabs. But I thought it was for the eight that were on the main deck , I missed page 7 but now I can see that they are gone. The black helps make them disappear and the friezes takes your eyes off the deck and back on to the hull lol. It took me awhile to find which peice was for were, but once I got it the went on pretty easy. The bottom row even had it cut out for the gun ports so I just followed along. I do have a question? When I get to the end of page 9 is it all off the plans from here on forward. Or am I missing a book ? Well that's it for today, I think I try a quarter badge assemblies tomorrow 😅. Thank for looking in
  2. Knocklouder
    .Thanks @aliluke, As I was gouging the bulk heads I said to myself " this is not smart". But it Looked OK. But now that you mention it, yep try to fix that. I took some cannons apart and reposition them. They fit better now. As far as the bulk head tips, that one slip by me no idea why I did it that way. It would have been easier to plank with no end. But hey I am learning lol. I changed the red to black I think it looks better. At least it's passable. It'll Do. So I am going to finish the cap rails then trim and friezes. Then who know what's next lol. This is what she looks like tonight. Thanks for looking and the tips. Greatly appreciated.
  3. Knocklouder
    You would think the the man holding the rudder is at the stren, is the way the boat goes. But maybe these boats are ambidextrous, if he takes his rudder to the bow, depending upon which direction the wind blows, I dont know lol. I think I sucked in to much clear coat fumes tonight from my Pegasus deck lol Your boat is looking great Glen.
  4. Knocklouder
    Welll the decks are installed and I am ready for the cap rails. I have to decide what to do about my cannons. The kit gives you two options one is just breeching rope. Options two you have to buy more blocks and eyelets. So I am going with options one. Its been so much fun building this ship, she not the finest but she looking good to me. There is so much on this model that is new to me and if it was not for the database and the info you can get here on MSN/NRG. I would probably just shelf it. But I can't buy another till I finish the ones I Have. Lol Later my friend's Bob M.
  5. Knocklouder
  6. Knocklouder
    Mine are in the MAIL lol
  7. Knocklouder
  8. Knocklouder
    Thank you so much @allanyed.but I really just followed the instructions lol. It just came together nicely. Thanks everyone who like it . so now the first thing I decided to do was I had to drill all the hole for the eyelets ' so using an awl to start the hole I drilled them all. I super glued the drill bit to a dowel then attaching it to my drill the rest was easy. I got this Idea from @mtaylor log thank you. I fitted the cannons with breeching tackle only as they won't be seen. You see once the upper deck is on its all hidden. Working away, I rigged 10 cannons put them on and glued the decks on. Now you can't see all that work lol, but it was Amazing take my word for it lol I have to Thank @Gabek for his stove he made for my ship. I put it on and yep covered it up but it looks awesome. Lol. So now I have 8 more cannons to rig, not sure what I will do just yet, in terms of how I will rig them, but now I can finish the decks, and oh yes my cap rails that's what I started out to do lol. Coming along nicely this is the fun stuff, won't be long and I get to do some rat lines lol 😆. Later all Bob M.
  9. Knocklouder
    Good luck on your journey on this one. I follow along, always nice to see a master whip up another wonderful build, I am sure Cornhusker will love it. .my man.
  10. Knocklouder
    This is the place to be !!!!
  11. Knocklouder
    Your Boat will look cool on the water, I was going to do that for mine but I could not wait to start the Pegasus. Now I am knee deep into that ship. Just wondering if your planning to have someone walking on the water when your done lol
  12. Knocklouder
    Finally got the rudder on. It went fairly well, neanderthals have a hard time nailing tiny nails in the hull but it's done lol. I could not install the top gudgeons and pintels, so just painted the top one on , not really noticeable, It'll Do!! I even installed the curtains lol. Now I think I work on the cap rails . Then move on to the bow and finish it up as well. There is more written instructions then pictures, so I have to studied the logs more. I am getting the idea, but the friezes are very small and hard to locate which one goes were, which way up or down lol but I'll get it lol. Everyone who has come to the shipyard loves it they all go wow is that ever nice. So far my son and wife have seen it lol. I have got lots of mistakes but I'm happy with it. Ok on to the starboard side. Thank you my friend's
  13. Knocklouder
    Congratulations on your first boat, she's a keeper. Nicely done.
  14. Knocklouder
    I would say she cleaned up really nice. She even has a name now, had a great day in the shipyard, but I never got to the rudder. Oh well tomorrow is another day 🙃. The tafferal was easy done. But I noticed that the two little decorations beside the name should be on the opposite side of each other. Or well nobody will notice lol. So off to install the rudder. Talk soon my friend's
  15. Knocklouder
    Great looking Mo'o Mo'o s , now your telling me your long horns are bilingual . They Mo'o in Hawaiian and Texan lol. Your long horns are as amazing as your work. They look awesome.
  16. Knocklouder
    I would like to thank @Gabek for giving me this package of little swabs they were fantastic for spreading the Phatic glue around. A little swipe on the copper plate then some on the ship and it stuck great. So Did a little research lol and found out I can just could clear coat the copper. So after I washed it, and wiped it with vinegar, and rinsed it again I dryed it good and sprayed two coats of clear on, I think it looks OK.¹ So I finished all the copper , rudder is done time to move on lol. I have decided to finish off the stern and mount the rudder. It does.need a little clean up but it will do. This should be fun, the peices are tiny and I have to paint them lol I can hardly make out what they are , one looks like a knight with a sword 😅 Thank for looking
  17. Knocklouder
    Congratulations on your first build. You have done an awesome job.
  18. Knocklouder
  19. Knocklouder
    THE HARBOR STAND. Today I made the stand for my Pegasus, I call it the Harbor Stand because I got the idea from @Snug Harbor Johnny. Thank you. Frist I cut up the pieces and router the edges. Then put some dowels for a little support. So then I stain it then two coats shellac sealer. Boom ship on a stand lol . So I took the ship off the stand to let everything dry up really well. And now I am off to study the plan to see what my next move is. Looking up way to seal the copper so I can at least touch it with out putting fingerprints all over it . It looks so cool really happy with it. Thank you everyone who's log I looked at and saw how to install things, then make my attempt lol Modeling is so much fun. Lol.
  20. Knocklouder
    Well the football game was a bust home team lost , lol. But I did finish the copper on my Pegasus. It has to be cleaned up, but I think I did ok. I am very happy with it.I even have a little copper left for the rudder, some day in the future 😀. So now that the copper is done I going to make the stand. @Snug Harbor Johnny made a wonderful stand for his ship, and I am going to copy his idea for my Pegasus, well I will try any way lol. Thanks so much for the likes and help so far. This is how she looks today later my friend's.
  21. Knocklouder
    Congratulations, the ship looks really awesome.
  22. Knocklouder
    Pulling up a chair my friend, looks like another fantastic idea coming to life, Good luck on your journey. Success
  23. Knocklouder
    Oh Thank you all, and @Bryan Woodsthank you. It scares me when when people say they following me because I have know idea what I am doing lol. And If I am doing it wrong lol. The copper on the star board side is going great. Now that I have learnt how to use the glue, how the plates lay, how to use a little stick to clean the glue. This is all I am going to do today, got some silly foot ball game to go watch lol. I am going for the home team lol. I must have look at every Pegasus log that we have here, and thought I can't do this. But it's kinda like put tiles on the wall. And I have done that lots over the years. I just have to do it a couple of times and then it's a matter of how much care I take to make it look good. But I do have a tendency to say " It'll Do" . Lol. We hit 45,000 members today, I have been watching it go up all week, lol been walking around the house saying 985. 986 lol then early this morning I screamed 45,000 yahoo. The first Mate says I lost it lol. But who cares lol. I am just happy that I was able to look at all these logs and give it a try . Oh yea game time lol later all. Thanks everyone.
  24. Knocklouder
  25. Knocklouder
    So I got up this morning and looked out side, yep still snow on the ground , so I ran down to the ship yard and finished the starboard side copper. For my first attempt at copper I think I did ok. This is the practice side. It will be displayed looking at the portside. It was fun doing the copper. I learnt lots from doing this side it not perfect but for me it is. I will try to do a better job on the portside. Now that I have done some coppering. The Super Phatic glue is I think fantastic. It cleans up with water, I had two place that I used super glue on and had to really scrub it off. So sticking to the Phatic glue. Thanks to everyone who liked it. On to the portside lol. Talk soon my friend's. .

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...