-
Posts
6,060 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Omega1234
-
Hey Jond What were those sail makers thinking of!!! Seriously though, it's my pleasure to comment and follow your progress! Keep up the great work. Cheers Patrick
-
Hi Jond It's great to read your update above. First of all, can I just say, wow! The last photo of your ship with the nine sails set, is truly impressive for a number of reasons. Firstly, just the physical size of your ship and, secondly because she is one hell of an attractive ship. I can see why she must have attracted you in the first place! Can I also just say that I sympathise with you about your transport issues and the potential for breakages along the way. I had enough problems transporting my RC yachts and they were only 4 foot long (LWL). I guess that's something that may have to be accepted in your case as any attempt to move such a ship would be problematic....not that that makes breakages any easier to accept. On the flip side, it's fantastic that you're reaching the stage where it won't be long before the sails are bent and your ship will be heeling into the waves as she moves serenely across the water. All the best and I look forward to your next update! Cheers Patrick
-
Hi Ben Nope, but good question. In the real ship, these "picture windows' are in fact large louvered openings to aid in the ventilation of the engine room. I'm still trying to figure out how to do the louvres, but at such a small size, they ain't easy! Thinking caps on.... Once done, it'd make a lot more sense. Any news on the baby front yet? Cheers and thanks. Patrick
-
Hi Igor I tried to copy a real Diesel engine from the Yanmar website, but it got so difficult (in fact near on impossible!) to do anything. The engine is thinner than a matchstick and only about 0.8 of a centimetre long. I think I have to accept that trying to achieve the 'essence' of the engine rather than the detail is the best I can do. I'll try to take some photos tomorrow. All the best! Patrick
-
Hi everyone and many thanks for all of your likes and comments! Greatly appreciated. Well, I've finally started on the internal bulkheads. First and foremost, I've started on the engine room which is situated in the centre of the ship. The funny little red thing that you can see in the first photo is, in fact my feeble attempt at the ship's engine. I'm a bit embarrassed about it, because it's so tiny that it was difficult to get any detail on it. If I can, I'll try to take some photos of it (that way, we can all laugh at it!!!). Anyhow, I'm just glad that I've been able to start on the internal work, because that's what I enjoy the most. All the best! Cheers Patrick
-
ROYAL CAROLINE 1749 by Doris - 1:40 - CARD
Omega1234 replied to DORIS's topic in - Build logs for subjects built 1501 - 1750
Hi Doris Simply superb and amazing! Congratulations on your new job, too. Cheers Patrick- 881 replies
-
- royal caroline
- ship of the line
-
(and 1 more)
Tagged with:
-
Hi Keith Nicely done! Judging by the quality of the finish that you've got on the deck and other woodwork, I can see that you're a skilled hand at model building. You just can't beat the J Boats for sheer beauty and majesty, can you? I'm looking forward to more updates. Cheers Patrick
-
Hi timmo The planking looks good. I've also gone for speed over meticulousness if I know the hull's going to be painted. The sanding and filling will no doubt come next and then you can look back with satisfaction. A job well done! Cheers Patrick
-
Cutty Sark by NenadM
Omega1234 replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
Hi Nenad Work, gardening and remembering the love and special memories, will help you heal. I wish you, Hothead and Princess well. Take care Patrick- 4,152 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
-
Congratulations Pete! With those classic colours, she looks like a picture from a book of vintage yachts from yesteryear! Just beautiful.
- 77 replies
-
- alerion
- herreshoff
-
(and 1 more)
Tagged with:
-
Hi Ben You must be feeling like the 'proud father' of the neighbourhood! Very slick and, talk about manoeuvrable! Nice! Would the full size ship have been able to turn on it's own axis, do you think? All the best Patrick
-
Hi Vaddoc Good luck with the painting, as it looks like you've solved the masking issues you had before. Also, I reckon the colour combination you mention will set off her hull lines really nicely. I hope all goes well and that you can show us the results in the next update. Cheers Patrick
- 253 replies
-
- ketkch
- gaff-rigged
-
(and 1 more)
Tagged with:
-
Hi Ben Good luck with Baby No.2. I hope your wife has an easy time during the 'main event' and that both are delivered safe and well. All the best Patrick
-
Hi Pete, Nils, Bob and Ben Thanks for all your comments! Nils, you're right about the engine...it's going to be fun and, at this tiny scale, I'd be happy if it even looks passable! I'll do my best, of course. Ben, thanks for the tip about the Yanmar website. I'll check it out. I've also been following your engine build and thinking how great that looks. You must be getting close to finishing it by now, so, I'm looking forward to your next update. Pete - thanks for your encouragement which is always greatly appreciated! Cheers Patrick
-
Hi Nils Grant's beat me to it, because that's exactly what I wanted to say, without a doubt. The only thing I would add, is that there's an element which cannot be measured, and that's the "Nils Magic". So, the magic, together with your skill and methodical approach, is going to lead to one hell of a beauty! Looking forward to following along for the ride! Cheers Patrick
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
-
Thanks, Bob. Yep, not far off now. But first, I want to try to make the engine (or, at least something that looks remotely like one)! All the best Patrick
-
Yep, you're right. Also, I won't need to go to Holy Confession to confess my sins caused by perving at things I shouldn't be looking at!
- 116 replies
-
- kilkis
- mississippi
-
(and 2 more)
Tagged with:
-
Hi folks Thanks for all your comments and likes!!! Here is the latest update: I've partially completed the oval cockpit at the stern of the ship. There's still more fairing and sanding to go, but, it's looking ok so far. Up forward, I've done the companionway hatch that sits right on the foredeck. If you look carefully, you'll be able to see that I've left the sliding hatch open in order to give the foredeck a semblance of 'life'. Still heaps more work to go, though! Enjoy your weekends! Cheers Patrick
-
Hi Panagiotis You know, looking at your beautiful model, is a bit like being on a Nudist Beach. There's so many things to look at, that I don't know where to start! The more I look at your photos, the more details start popping up! Amazing and marvellous. Look forward to more updates. Cheers Patrick
- 116 replies
-
- kilkis
- mississippi
-
(and 2 more)
Tagged with:
-
Hi Pete She just keeps getting better and better! Very nice. Cheers Patrick
- 77 replies
-
- alerion
- herreshoff
-
(and 1 more)
Tagged with:
-
Coming along, really nicely, Nils!
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
-
Hi Igor Dang! That looks nice. A real miniature marvel. Well done Patrick
- 154 replies
-
- colin archer
- lifeboat
-
(and 2 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.