Jump to content

New Bedford Whaleboat by PJG - FINISHED - Model Shipways - 1:16 - First nautical build


Recommended Posts

A few more small things and a little history

 

As I mentioned early on in this log, I picked this boat because I had become aware of ancestors who served on whale ships out of several New England whaling ports and aboard many ships (including the Morgan). I wanted to associate this boat with a specific ancestor and the ship he sailed on. Given the 1850-1870 general window for this particular style of boat I went with the Adeline which he was aboard in 1856. I don't have any information as to the design of the ship's flag but found enough examples from other ships active during this period to make an educated guess. I don't have any proof that whaleboats flew any type of marking pennants atop their masts or individualized their waifs to sort out their kills from those of other boats but given the level of activity during this "peak" period it doesn't seem too far-fetched. Regardless of historical evidence/accuracy, my boat flies Adeline's colors! 

 

pic64.jpg.b55bf7b52a27534d54bff4bd31feeec8.jpg

 

pic65.jpg.60432c63cb7d340ba501b1245d591749.jpg

 

Once weathered and displayed, these should add a nice pop of color/interest.

 

pic66.jpg.c338b4b5e5619b18f21eacaa4ac3a02a.jpg

 

I ended up making the center board from 3 individual pieces rather than the single piece die-cut offered in the kit. The plans also show a lead weight inserted into the middle board which I made from Sculpey clay. I'm assuming that these center boards had to have had some kind of reenforcing structure (iron rods running from top to bottom through each board?) unless there's some kind of fancy nailing/joinery that could hold boards together end-to-end like this. These things must have undergone a lot of stress beneath a tacking boat. 

Link to comment
Share on other sites

OK, we have a few nearby Michael's so I'll see if I can make up a small assortment. Thank you for the help. The flags are really sharp. Is that a textile?

 

Is the Adeline the same ship as the Adeline Gibbs? The later has it's logs digitized at the Martha's Vineyard Museum.

Link to comment
Share on other sites

12 hours ago, Mike_In_RI said:

The flags are really sharp. Is that a textile?

Thanks...they're made from the material that came in the kit for the sail. 

12 hours ago, Mike_In_RI said:

Is the Adeline the same ship as the Adeline Gibbs? The later has it's logs digitized at the Martha's Vineyard Museum.

It looks like the Adeline Gibbs is a different ship. I checked the crew lists for the years in question and my guy doesn't appear. I do appreciate the heads-up to another great resource though!

Link to comment
Share on other sites

Knowing when to stop

 

My tendency with all things creative is to keep doing "one more thing" until I've made a mess of it. The good news is, I'm going to break that habit with this model. I struggled a bit with the decision to not include the sail on this boat but after spending some time with and without my paper mock-up in place, I decided l much preferred the sail-free look. I may revisit that at some point in the future but for the moment, this build is officially done. Thanks to everyone who took the time to drop in, have a look, make encouraging comments and show interest in general. It's much appreciated.

 

pic72.thumb.jpg.0ef21142bc7c04f13137c7f7c1d9eb81.jpg

 

pic73.thumb.jpg.a4f8a29eb5efdd36174a65e80bdfb13e.jpg

 

pic76.jpg.ab24656f9fdaa452f8032714a425619c.jpg

 

pic81.thumb.jpg.575aa5e2943235c8611678a6805b610b.jpg

 

pic82.thumb.jpg.2a9ad318370e0ae6a4374693e4f8d8fb.jpg

 

 

 

pic79.thumb.jpg.33185216df19f29c8a0b588ed3c1e771.jpg

 

pic74.jpg.bb6f7ec1dbd9f5de6bab2620e4a2859c.jpg

 

pic78.jpg.6a21f160a27ba7ec866ae71e16142467.jpg

 

 

 

pic68.thumb.jpg.5fbcbeb105c13aebba2b60eb32b3f9d0.jpg

 

pic71.jpg.30c04fe2e3b45378c2bc1aae7b1b6b3d.jpg

 

pic75.thumb.jpg.f4ba23a87c0103fbaa260a97adaf62d4.jpg

Link to comment
Share on other sites

Well, I'd have to say that your project is absolutely stunning. The build quality, the weathering art (which I truly envy) the presentation and the photography all bring ones attention right into the scene. Well done!

 

Can't wait for the first make that the second photo of the Fifie. You're gonna need more space.

 

Link to comment
Share on other sites

  • 2 weeks later...

Don't know how I missed your log, but saw the gallery photos and just caught up. What a great build! I really like what you did with all the weathering. I never really considered building this kit, but you now have me intrigued...

 

 

Joe Volz

 

 

Current build:

Model Shipways "Benjamin W. Latham"

 

 

Completed  builds on MSW:

Caldercraft HMS "Cruizer   Caldercraft HMBV "Granado"   Model Shipways "Prince De Neufchatel"

 

 

 

 

Link to comment
Share on other sites

13 hours ago, jwvolz said:

Don't know how I missed your log, but saw the gallery photos and just caught up. What a great build! I really like what you did with all the weathering. I never really considered building this kit, but you now have me intrigued...

 

 

Thank you...it’s a fun kit to build, especially if you want to approach it as a blank canvas and do your own thing. 

Link to comment
Share on other sites

An absolutely beautiful boat. Your photos are sharp as a tack and equally beautiful...Moab

Completed Builds:

Virginia Armed Sloop...Model Shipways

Ranger...Corel

Louise Steam Launch...Constructo

Hansa Kogge...Dusek

Yankee Hero...BlueJacket

Spray...BlueJacket

26’ Long Boat...Model Shipways

Under Construction:

Emma C. Berry...Model Shipways

 

Link to comment
Share on other sites

Beautiful! This is one of the best whaleboat models I've ever seen. I might have to put one of these boat on my tick list now.

Bob Garcia

"Measure once, cuss twice!"

 

Current Builds: 

Hms Brig-Sloop Flirt 1782 - Vanguard Models

Pen Duick - Artesania Latina 1:28

 

Completed: Medway Longboat 1742 - Syren Ship Model Co. 

Member of the Nautical Research Guild

 

 

 

Link to comment
Share on other sites

One word.......STUNNING.

 

Congratulations on a beautiful model.

 

Cheers.............Fernando :cheers:

Current Builds - Colonial Brig Perseverance 1807 by Fernando E - Modellers Shipyard - 1:48 scale

 

Previous Builds - 

S Lucia by Fernando E - Panart - Scale 1:30

Sloop Norfolk 1798 by Fernando E - Modellers Shipyard - Scale 1:36 

 

Link to comment
Share on other sites

On 6/28/2020 at 11:50 PM, PJG said:

Thwart risers, some interior painting and ceiling planks:

 

I made one easily avoidable mistake here that careful reading of the plans and instruction book could have prevented. The thwart risers are intended to be slightly thicker than the ceiling planks that start under them but I failed to take note of this and used the same thickness of material. I’ve noticed this in several other builds so I can see that it’s an easy detail to miss. If I had realized this before installing the thwarts themselves I would have added a thin strip to fake the extra thickness. Oh well, another lesson learned. The ceiling planks went on mostly without a hitch other than having to improvise some hidden support here and there where a plank ended and the frame it was supposed to terminate on happened to be somewhere else. The great frame disaster strikes again! I added the first coat of paint before installing the ceiling planks but added some weathering later when I had a better feel for the overall color scheme. 

 

pic11.jpg.9ccd21f3341eec746c758cb99c9842b5.jpg

 

I decided to go with a dark blue/grey for the interior of the hull, thwarts and risers. These areas will be weathered to a lighter, sun-faded color eventually but my overall color scheme will be dark blue, black, various shades of grays, and white. Nobody seems to be able to pinpoint any particular combination of colors beyond the primer coats new boats were delivered with so I did my own thing. Given the jobs these boats were designed to do and the relatively short lives they were expected to do it in, I concluded that utility was probably much higher on the list than adventures on the color wheel. Distinguishing your boat from that of another ship seems to be a reasonable criteria when considering  how colors were chosen. 

 

pic12.thumb.jpg.4ebe7becdcb03430d309869f4d9b7ae1.jpg

 

I installed the first ceiling plank with the light gray paint I intended to use on those to get some sense of how the scheme would work. I knew everything would be toned down considerably with a little weathering so I settled on my choices. 

 

pic18.thumb.jpg.81ab04ae031dfb72d79bdc0d235ca8a5.jpg

 

Before the ceiling planks could be installed in the bottom of the boat the centerboard case and mast step needed to be added. Painting these the dark blue rather than gray was probably something that would have been considered a waste of time in a real boat but I liked the contrast and the fact that they were installed before the ceiling on the real thing made it somewhat plausible. I didn't use fasteners on this build so I made a test of simulating nails with paint early on. I didn't think these looked overly convincing so I ended up scraping them away with a sharp blade and using a simple number 2 pencil instead. With a little weathering I thought the results were much better. 

 

pic19.thumb.jpg.f5b78c38f83c26732a685af0d9edef64.jpg

 

pic20.thumb.jpg.a54e487e3b4f12e6c3b22f291bd52acb.jpg

 

With the ceiling complete and some subtle weathering applied (in my opinion) I was satisfied to move on to test-fitting the thwarts.

 

pic17.thumb.jpg.c97340081e7634e0bd0cc79d8a6e961d.jpg

 

With the interior mostly complete and painted, all 5 thwarts were fitted in position as per the plans. According to Ronnberg's book, the bow and stern sheets weren't painted so I resisted making them light gray. As you can see, the forward-most thwart ended up with a misplaced frame right in the middle. It should have rested between two frames. I could have moved the thwart forward and maybe gotten away with it but I decided to stick to plans from this point forward no matter what. The great frame disaster strikes again! 

 

pic22.thumb.jpg.c5cd024519e09274b6bb65459bdc3ab5.jpg

 

 

 pic23.thumb.jpg.30ae75a23749fd5bf8df46c3e4f8b180.jpg

 

Fast-forward and a whole bunch of other interior details get done! All of this work took several months to complete. Carving the cheek pieces, bow chocks, loggerhead, oar locks, peak cleats and various other parts was time-consuming and educational. I thought carving was going to be my achilles heel but turned out to be something I rather enjoyed. If a particular step/activity seems intimidating, just give it a shot. You may discover you had nothing to be afraid of. 

sooo fantastic build im thrilled wonderful explanation etc. i love model shipways but i onow myself how difficult is to build clinker and so on. so very detailed so realistic and nice. thanks fro sharing fantastic. i think i will try her once. oh treat for eyes .

Link to comment
Share on other sites

  • 1 month later...

I have one of these that’s almost complete. I have enjoyed working on it so much that I bought another kit so that I can have a do-over. I used the copper nails included with the kit. I also found them to be out of scale and even purchasing additional nails wasn’t going to cut it. So, I moved on to copper wire. That worked out well. Then I bought some sterling wire from fire mountain gems that I will use on my next build. I figure if it tarnishes, it will be black. It’s stiff enough to push through drilled holes and soft enough to flatten with a punch and an anvil.

 I don’t have the skills and dedication you have shown on your build, but I will enjoy the work and results of my next build.

Link to comment
Share on other sites

  • 8 months later...
On 7/8/2020 at 8:14 AM, PJG said:

Mast, mast rigging and line tub rope:

 

pic55.jpg.86a3f36d5780c92f7a2f38f1fedc18d7.jpg

 

pic56.jpg.4204e494704725d0522e938a023ebb9e.jpg

 

The dowel provided for the mast was warped like the others in my kit so I used a 1/4" piece I had in my scrap box. I'm not 100% sure what species the wood is but it took a lot of sanding to get it thinned and tapered to match the plans. Drilling holes by hand took time as well. On the bright side, it's perfectly straight.

 

pic57.jpg.e6008b08dbf1fd776f1a80bb3cdba668.jpg

 

I made my "wooden" mast hoops with paper. I have a limitless supply of paper sample books from 35 years as a graphic designer and take advantage of the various textures and weights to make all kinds of things. After applying my wood paint job I added a 50/50 wood glue/water mixture to stiffen and protect them.

 

pic58.jpg.7f46d6dfd0188bd5eff9bd7c880ee4d5.jpg

 

The shrouds are one long piece with a served hoop in the middle that slips over the top of the mast and rest on the shoulders. 

 

pic59.thumb.jpg.44115ffda433ca6e9972e7fabd049de5.jpg

 

The shrouds/stays (not sure which, if either, is the correct term?) run through the thimbles and back up to a loop that's spliced into the line. Everything is tightened with a slipped hitch later. I made my mast hinge hardware less bulky than the photo-etch provided in the kit simply because the reference photos I've looked at seem to indicate something more subtle. I knew I was going to bang it up a little and paint to a wrought iron finish so photo-etch wasn't going to work. The hinge hardware and the oar lock inserts are also paper, same as the mast hoops. 

 

pic60.thumb.jpg.dca69439256dcb1a101db0364f365eaa.jpg

 

A better look at the mast rigging. 

 

pic63.jpg.0be1b35c8fe498d57f35dc53b62236cf.jpg

 

Adding the lovely Syren rope to the line tubs. The stuff in the kit is awful.

 

pic61.thumb.jpg.2abd1c16d83d51320af19e1a61f542fe.jpg

 

I made sure to place the tubs in the boat to be sure the line was entering and exiting in the correct positions. The tubs will be lashed to the thwarts so making sure those lanyards are positioned correctly when everything is finally staged is important. 

 

 

 

 

The whole build has just been a pleasure to watch. I especially like your color scheme and weathering. The weathering has mae all the difference and small things like nails done with pencil etc. This is a build you can be justly proud of. My next boat is the Fifie as well . 

Thank you once again for allowing me to stare over your shoulder at a beautiful build .

Take care and stay safe during these COVID times ......Jim Cleland ....Aldinga Beach ......South Australia

Link to comment
Share on other sites

  • 3 months later...
  • 8 months later...

New Bedford Whaleboat:  I have ordered this boat for next build.  I have noticed you suggest taking extra time on building the build frame.  I understand the need for this and I have noticed a number of people have had problems with this area.  No one has pointed out what is wrong with this frame.  I have never built this type boat and hope to avoid problems that cause bad fit from the start.  Can you point out any of the problems that this step caused that may be prevented by adjustments?

 

Jon D

Link to comment
Share on other sites

  • 7 months later...
On 7/7/2020 at 6:44 PM, PJG said:

Mast, mast rigging and line tub rope:

 

pic55.jpg.86a3f36d5780c92f7a2f38f1fedc18d7.jpg

 

pic56.jpg.4204e494704725d0522e938a023ebb9e.jpg

 

The dowel provided for the mast was warped like the others in my kit so I used a 1/4" piece I had in my scrap box. I'm not 100% sure what species the wood is but it took a lot of sanding to get it thinned and tapered to match the plans. Drilling holes by hand took time as well. On the bright side, it's perfectly straight.

 

pic57.jpg.e6008b08dbf1fd776f1a80bb3cdba668.jpg

 

I made my "wooden" mast hoops with paper. I have a limitless supply of paper sample books from 35 years as a graphic designer and take advantage of the various textures and weights to make all kinds of things. After applying my wood paint job I added a 50/50 wood glue/water mixture to stiffen and protect them.

 

pic58.jpg.7f46d6dfd0188bd5eff9bd7c880ee4d5.jpg

 

The shrouds are one long piece with a served hoop in the middle that slips over the top of the mast and rest on the shoulders. 

 

pic59.thumb.jpg.44115ffda433ca6e9972e7fabd049de5.jpg

 

The shrouds/stays (not sure which, if either, is the correct term?) run through the thimbles and back up to a loop that's spliced into the line. Everything is tightened with a slipped hitch later. I made my mast hinge hardware less bulky than the photo-etch provided in the kit simply because the reference photos I've looked at seem to indicate something more subtle. I knew I was going to bang it up a little and paint to a wrought iron finish so photo-etch wasn't going to work. The hinge hardware and the oar lock inserts are also paper, same as the mast hoops. 

 

pic60.thumb.jpg.dca69439256dcb1a101db0364f365eaa.jpg

 

A better look at the mast rigging. 

 

pic63.jpg.0be1b35c8fe498d57f35dc53b62236cf.jpg

 

Adding the lovely Syren rope to the line tubs. The stuff in the kit is awful.

 

pic61.thumb.jpg.2abd1c16d83d51320af19e1a61f542fe.jpg

 

I made sure to place the tubs in the boat to be sure the line was entering and exiting in the correct positions. The tubs will be lashed to the thwarts so making sure those lanyards are positioned correctly when everything is finally staged is important. 

 

 

 

 

PJG, may I ask what kind of diameters you used for the whale line & rigging?

I agree the supplied stuff is awful. 
 

Hermann

 

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...