Old Collingwood Posted February 3, 2021 Author #91 Posted February 3, 2021 (edited) We had our normal covering of snow - brought the normal chaos and disruption to traffic (well if we were not in lockdown it would have done)😊 My pic out the window. OC. Edited February 3, 2021 by Old Collingwood Edwardkenway, mtaylor, Landlubber Mike and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 3, 2021 Author #92 Posted February 3, 2021 Evening all, right then - straight in with the fun bit, so I dug out the internal parts from the M1 kit - all Five sprues with about Two Hundread parts, first thing was to cut the round bottom floor section out, I also took the M1 lower hull section out and compared it to my Chally one - "Upsss Problem"..............the Chally widthe between wheel/track well sides in narrower then the M1, so the round floor setion will not drop down into the space, only option was/is to file off both sides of the floor to allow it to fit, only problem doing this is it means the turret will not be able to rotate and will have to be glued forward or rear fixed down. I can not make the whole floor rounded and smaller as there are side pieces that glue to the floor and lign up with the turret ring, the distance between these would be two small and not lign up. The top is just dry fitted and will be for some time yet. Almost foregot..........I also added a bit more bling in the shape of a PE reel cage and reel on the rear. Lots of head scratching moments yet to come ................."who had this idea"???????😁 OC. Egilman, lmagna, Landlubber Mike and 6 others 9 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Jack12477 Posted February 3, 2021 #93 Posted February 3, 2021 34 minutes ago, mtaylor said: Or did this assume you have snow shoes? Yes ! Plus the snow compressed making it firmer than fresh snow Egilman, mtaylor, popeye the sailor and 4 others 7 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Edwardkenway Posted February 3, 2021 #94 Posted February 3, 2021 Must feel pretty weird stepping out onto 'ground level' from the first floor😲 Old Collingwood, Egilman, popeye the sailor and 2 others 5 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
Jack12477 Posted February 3, 2021 #95 Posted February 3, 2021 (edited) This should give you perspective Tug Hill Plateau region of NY [this is what my uncle described encountering on his drives to Massena] Edited February 3, 2021 by Jack12477 mtaylor, Canute, Old Collingwood and 3 others 6 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Canute Posted February 4, 2021 #96 Posted February 4, 2021 Yeah, with snow like that, corners can be adventures. They usually make them 4 way stops, at least in the places I've been, like Anchorage, AK and Goose Bay, Newfoundland. Old Collingwood, Egilman, lmagna and 4 others 7 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Jack12477 Posted February 4, 2021 #97 Posted February 4, 2021 That is a one way lane, every 1/2 mile they widen it so cars in opposing directions can pass, if you get caught between passing section one of them has to back up to the previous passing zone.......... mtaylor, popeye the sailor, Old Collingwood and 3 others 6 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Egilman Posted February 4, 2021 #98 Posted February 4, 2021 Up where I lived, near the Canadian border we would get 4' of snow a night for 3-4 days in a row... The second story door was required..... You didn't need snowshoes but they sure made it easier..... Jack12477, Edwardkenway, mtaylor and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Egilman Posted February 4, 2021 #99 Posted February 4, 2021 2 hours ago, Canute said: Yeah, with snow like that, corners can be adventures. They usually make them 4 way stops, at least in the places I've been, like Anchorage, AK and Goose Bay, Newfoundland. The locals automatically understand that, what's funny is those that are new to the area and seeing their first real snowstorm.... 46 minutes ago, Jack12477 said: That is a one way lane, every 1/2 mile they widen it so cars in opposing directions can pass, if you get caught between passing section one of them has to back up to the previous passing zone.......... OH yes, and slow, everyone either puts away the 4 wheel drives or lock out the hubs.... you nose into a snowbank it might be a few days before you get dug out..... Light pickups or station wagons with multiple sets of chains, real chains not those silly cables they call tire chains today...... Snow shovels and tow chains in the trunk cause you helped your neighbors when they got stuck, everyone pulled together when the white stuff comes.... Old Collingwood, popeye the sailor, Canute and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Old Collingwood Posted February 4, 2021 Author #100 Posted February 4, 2021 Evening all, more progress, next stage in the internal detail (battle) I mean build, is to compare the Chally turret ring with the M1 - yep quite a difference (the M1 quite a bit wider) the M1 ring also has all the detail on it - so I wanted to try to transfer the ring (part of it) over onto my Chally, this was not going to be easy as the only thing I could do was to follow a ridge on the bottom that is the right width I need, and to score through it with my scalpel blade till it went all the way through the plastic. Messy and nearly a dangerous job as the blade did slip a few times, but after about an hour of blade work it eventualy broke through, just a bit of clean up and a test fit - it needed to be slit then shaped a bit at the front thenglued in place while pushing against the rim, after I added a Two part edge under there the Breech will be. Think it will work.......... OC. king derelict, marktiedens, EricWilliamMarshall and 8 others 11 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Canute Posted February 4, 2021 #101 Posted February 4, 2021 Nice work, finessing the M1 track into the Chally. popeye the sailor, mtaylor, lmagna and 2 others 5 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Old Collingwood Posted February 5, 2021 Author #102 Posted February 5, 2021 1 hour ago, Canute said: Nice work, finessing the M1 track into the Chally. Thanks Ken, its supprising how much wider the lower inside hull is in the M1 compared to the Chally. OC. popeye the sailor, Egilman, Canute and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
popeye the sailor Posted February 5, 2021 #103 Posted February 5, 2021 it may not be.........think of the interior 'box' in car models. if this kit, or the one your taking the parts from was based like this, you may find that there may be some amount of 'dead space' in the chassis tub. the transplant looks good......too bad you can't keep the functionality for the turret. Egilman, Canute, Edwardkenway and 1 other 4 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Old Collingwood Posted February 5, 2021 Author #104 Posted February 5, 2021 1 hour ago, popeye the sailor said: it may not be.........think of the interior 'box' in car models. if this kit, or the one your taking the parts from was based like this, you may find that there may be some amount of 'dead space' in the chassis tub. the transplant looks good......too bad you can't keep the functionality for the turret. Thank you Denis. OC. mtaylor, Canute, Edwardkenway and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 5, 2021 Author #105 Posted February 5, 2021 Evening all, more progress with me little tank, more work progressing with the turret internals, basically some supports and a bit of height adjustment to make sure it fits in the hull, lost more to add. OC. EricWilliamMarshall, marktiedens, Canute and 6 others 9 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 6, 2021 Author #106 Posted February 6, 2021 Just found a load of internal pics - well video realy i did screenshots of, I have a lot of work to do.😲 OC. popeye the sailor, Edwardkenway, Jack12477 and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 6, 2021 Author #107 Posted February 6, 2021 The inside actualy looks square not much evidence of the turret mounting/traverse ring - Again not my pics I found the video on the net - I just did screen shots from the different angles. Lots of pics .............. OC. Jack12477, popeye the sailor, Edwardkenway and 7 others 10 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 6, 2021 Author #108 Posted February 6, 2021 Evening all - back on the turret trials, I spent most of the afternoon working on shaping/cutting and bending some PE plates, these are just to enclose the turret from the Hull at the fornt and rear - took a bit of doing but aleast that stage is done, lots more to do yet though. OC. lmagna, Edwardkenway, mtaylor and 6 others 9 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 7, 2021 Author #109 Posted February 7, 2021 Currently in the middle of researching what the turret floor was like in the Chally2 - what the seat hights where and what was around the floor under the turret traversing ring, and if the charge was kept seperate from the projectiles (that were kept in the turret rear) OC. Edwardkenway, Canute, lmagna and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Egilman Posted February 7, 2021 #110 Posted February 7, 2021 5 hours ago, Old Collingwood said: Currently in the middle of researching what the turret floor was like in the Chally2 - what the seat hights where and what was around the floor under the turret traversing ring, and if the charge was kept seperate from the projectiles (that were kept in the turret rear) OC. Here's what I can find brother... Quote The L30A1 gun uses three-piece ammunition: the projectile, propellant charge and primer are separate parts, a design decision that affects both lethality and storage options. The ammunition stowage of the Challenger 2 is designed to accept only certain types of ammunition parts (propellant charges, primer magazines and projectiles) at certain places (for example all propellant charges are stored within the hull below the turret ring). This info came from here..... And this source will have a bunch more info on the turret interior and it's ammo loadouts... Hope it helps... Canute, EricWilliamMarshall, mtaylor and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Old Collingwood Posted February 7, 2021 Author #111 Posted February 7, 2021 11 hours ago, Egilman said: Here's what I can find brother... This info came from here..... And this source will have a bunch more info on the turret interior and it's ammo loadouts... Hope it helps... Thank you kindly Brother. OC. Canute, Egilman, popeye the sailor and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 7, 2021 Author #112 Posted February 7, 2021 Evening all, a good days work on the turret, I made a base and added the commanders adjustable seat, next was to create similar for the gunners seat/position, last was the loaders seat. To gauge the correct hight I made up one of the tanker figures I have brought, I tested it by dry fitting the turret roof and placing the figure through the commanders hatch. OC. EricWilliamMarshall, Egilman, marktiedens and 6 others 9 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 9, 2021 Author #113 Posted February 9, 2021 Evening all, a day of "fettling and fiddlings - measuring and adjusting" as the commanders seat was too low, also from the pics I have I discovered the raised area for the commander had the seat pad left in place with a cover that pulls over it, I had to make up about 4mm in hight so I basically just glued some plastic together and shaped and glued it in place, I then checked the commander figure - better this time. Next I made a step that goes in between the commander and gunnner - just a box affair shaped and glued. I foregot to take any pics so hope my wording explains it ok. OC. lmagna, Egilman, mtaylor and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Baker Posted February 9, 2021 #114 Posted February 9, 2021 (edited) I see something strange. On the chair on which the figure stands. There is a kind of "backrest" (backrest = google translate English..) on it. I think it is placed backwards (needs a 180 ° turn ) see picture Edited February 9, 2021 by Backer Canute, Edwardkenway, mtaylor and 2 others 5 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Old Collingwood Posted February 9, 2021 Author #115 Posted February 9, 2021 3 hours ago, Backer said: I see something strange. On the chair on which the figure stands. There is a kind of "backrest" (backrest = google translate English..) on it. I think it is placed backwards (needs a 180 ° turn ) see picture Hi Patrick, yep I have re model-ed that part as it just wasn't right, I was trying to show the cushion part pull up in a stowed position, but I dont thinj it does, there is a cover that covers the seat cushion while the comander is standing on it. Deffinatly an on-going project. OC. Baker, Canute, EricWilliamMarshall and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 9, 2021 Author #116 Posted February 9, 2021 Evening all, some good progress over tha last Two days, I started constructing the ammo storage area, this was a bit of scratch building exercise using the M1 kit parts - didn't turn out too bad but more needs doing to it, I also worked on the commanders seat including making a frame and backseat cushion, slowly getting more busy. I also built the top main turret part and cleaned up the edges, and again am using it by dry fitting. OC Egilman, Jack12477, Edwardkenway and 9 others 12 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Landlubber Mike Posted February 10, 2021 #117 Posted February 10, 2021 That's coming along really nicely OC - well done! Edwardkenway, Canute, lmagna and 3 others 6 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
Old Collingwood Posted February 10, 2021 Author #118 Posted February 10, 2021 30 minutes ago, Landlubber Mike said: That's coming along really nicely OC - well done! Thanks Mike, its tricky work as the Two tank interiors are quite different - so it takes a lot of kit bashing/fettling. OC. Egilman, Landlubber Mike, popeye the sailor and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted February 10, 2021 Author #119 Posted February 10, 2021 Evening all - more progress - starting to construct the turrets inside walls as they re quite thick in the Challenger, I had to construct them using some odds and ends - joined together and shaped. Thought I would take a sneaky pic through the barrel mantlet...... OC. lmagna, mtaylor, Egilman and 8 others 11 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
mtaylor Posted February 10, 2021 #120 Posted February 10, 2021 Looking super good bashing this model, OC. popeye the sailor, Canute, Edwardkenway and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.